Anyone have this issue?
Whenever I have a new rom, it works great, as soon as i reboot or a low battery forces a power down, it is buggy and unresponsive upon reboot.
symptoms include:
1. multiple entries on text/numbers - ie when pressing a, it registers aaaaaaa
2. cannot swipe screen, it will open app on homescreen that it presses
3. overall, no accuracy on touchscreen.
4. overall, it really seems to effect the touchscreen and it consistently happens on reboot.
try calibrating your screen during initial setup or in keyboard settings
touchscreen issue
the only thing that works is to reset data on it from the fastboot screen. (skateboard screen)
From there, the touchscreen works, but i have to start from a new device. Really lame.
Right after the data reset, I turned the phone off and on, and it works. Seems like it only wants to happen after i put things on the device.
Related
Has anyone else had the issue where you can press down on the screen, a tool bar or something and the screen starts to shake or the selector starts to auto select things. I get this a lot and typing is often very hard because it randomly selecting things when i am typing on the keypad.
I have seen it once when i put the phone down go through random menus, is this a fault or just normal due to sensitivity?
A|ex said:
Has anyone else had the issue where you can press down on the screen, a tool bar or something and the screen starts to shake or the selector starts to auto select things. I get this a lot and typing is often very hard because it randomly selecting things when i am typing on the keypad.
I have seen it once when i put the phone down go through random menus, is this a fault or just normal due to sensitivity?
Click to expand...
Click to collapse
Hi
I've had the same problem several times with both stock rom and cooked.
I turn it off, wipe the screen and it will usually revert to working properly.
Most would say it's a fault unfortunately. Personally I've returned mine for a replacement after a 'repair' which fitted a new screen made the problem worse.
See this thread.
feel lag on when is unlocking. did any one having a same problem with me??
please delete this post...
The unlock swipe would lag for the following reasons:
1. Your wifi was turned on but is off because of screen being off. You turned on the screen which makes the phone re-enable wifi and connect to a network. This process will lag the swipe animation.
2. You used some kind of app (ie. JuiceDefender) that would disable APN (3G) when your screen is off. Turning the screen on again will make the phone to try to reconnect to 3G and this will also lag the swipe animation.
3. You just turned on your phone and because things are still loading at startup, doing the swipe will lag.
Tip: Try to wait for 5 seconds after turning the screen on and then do the swipe motion. It should go back to normal.
If none of that applies to you, do a factory reset =)
this is my second time to hard reset it but still the same.
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
shanespencer said:
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
Click to expand...
Click to collapse
you might have a problem with your screen where some parts wont respond to your touch
download any drawing programs " i find magic marker " is the best from the market place. its free. and tap dots all over your screen, if there is/ are parts that doesnt response to your tap from the first time, that means u have problem with the screen and its not accepting your touch input. which is why your swipe doesnt go all the way sometimes.
Yes there is lag on the unlock screen. I see it as just bad programming by SE.
-------------------------------------
Sent via the XDA Tapatalk App
My swype keep changing direction, anyone nows how to set it to a particular side?
@mirdones - it changes sides when you start with your finger at the top of the swipe arc and slide your phone across the screen (left to right or right to left)..
@everyone - my swipe unlock occasionally stops about 3 quarters of the way along.. all I do is re-swipe from where it stopped and it's fine - that said, it doesn't happen as much now that I have stopped using task killers and startup auditor.
I find that instead of a slow swipe more of a flick works well for me.
Does anyone know if its possible to disable the se lock and just use the android one?
gavriel18 said:
Does anyone know if its possible to disable the se lock and just use the android one?
Click to expand...
Click to collapse
...would love to know this too
After doing a hard reset on my perfectly-functioning Pro the other day, the screen and buttons have now stopped working. My question is two-fold:
1. What the heck is going on?
The phone worked fine until I did the hard reset. Now, when I do a hard reset, everything appears to work correctly through the screen-alignment. The screen responds properly at that stage. Immediately afterward, the normal Today screen pops up for a split second. After that, the "Treo Customization" screen comes up, and that's where it all goes to hell. After the "Treo Customization" runs its course, the phone says "tap screen to reset." After tapping the screen, the phone responds and resets itself.
After that, a blank today screen appears. The tool bar on top is there and the background is there, but that's it. The screen and buttons are unresponsive except to brighten the screen after it periodically dims. Several other functions continue to work. I can activate wifi via the side button. The top button turns off the screen. Strangely enough, the QWERTY keyboard is completely unresponsive, except that the search button works (alt button and magnifying glass).
Does this sound like a hardware problem? Could it be fixed with a flash and new rom?
2. I tried to flash the phone and install a new rom to see if that would help, but I was unsuccessful for the following reasons: 1) When I run PANTHER_CDMA_HSPL_V101, the bootloader screen appears, but immediately upon that occurring, my sync connection disappears, so I can't proceed through my computer. 2) I can't run the manual flash program (SSPL-Manual-PantherCDMA) because I have no functioning controls on the phone itself.
Any ideas? Is there any way to achieve a flash on an unresponsive phone, or should I start shopping?
Thanks!
Mark Pemberton
Hi there ...
I've had my Moto X Style for about 6 weeks now & I totally love it ..
BUT, in the last 2 weeks, with no patterns showing, the screen will go black all of a sudden multiple times a day.?
While using an app, the onscreen buttons are there, haptic works on the buttons, black screen, but I have no more app access.?
I can press & hold the power button & shutdown fine. I even cleared the cache' of all my apps using an app, made no difference.?
I'm running out of idea's.?
Falling short of doing a factory reset, does anyone know how to fix this.?
The phone worked perfect for 4 weeks with ALL my apps installed back then,
so I don't know why it's going funny now.? Getting very annoying now, please help!?
On a specific app, or any app?
That's just it, I don't know, coz its random! - But I do take note, but nothing seems to follow any pattern as such.!?
Sent from my Moto X Style!
I have seen this after the phone has been unlocked by trusted device connection with BT and carkit. After disconnect and then trying to unlock the phone with pattern only the on screen buttons are there and no pattern.
Sometimes I tried twisting the phone so it goes in to camera and then swiping to view already taken images. This should give the lock pattern but I also get the black screen with only the buttons. After some retries I get a crash from Nova launcher (message is something like Nova launcher did not respond) after clicking the ok button the unlock pattern is back and I can unlock the phone. Other times this doesn't work, not within the amount of retry's I did, and I have to reboot the phone
Note: When you use the phone right after disconnect, before it's locked again you can use apps, sometimes only active apps, sometimes even start new ones. But after a while it will lock. Probably because it lost connection with the trusted device. After that same problem, can't unlock it again
I Had the same issue after I installed the Microsoft's AppComparison app (I don't know why I installed that app). But a factory reset solve the problem.
Hi,
I am after some help please, preferably without reinstalling all over again (root etc).
If i leave my phone to lock after a few minutes of inactivity, the screen stops responding but everything else works:
All hardware buttons work
AOD - works, I can press notifications and the app opens, or hardpress the bottom home button to get to the home screen, but the screen wont respond after.
Fingerprint scanner - works, it bypasses the lock screen but nothing responds
DEX - phone completely responsive via keyboard and mouse
Soft reset - everything works until it has no activity again.
Safe mode - exactly the same, so seems not to be app related.
Just the screen wont respond after passing AOD but phone otherwise functional. Not dropped, no water damage - all good there.
Anyone gone through similar?
Cheers
Good lock 2018 - lock star
Interesting - after spending nearly all day playing about and deciding to post, i remembered there was a lockstar update for me this morning. I disabled the lock screen i built and the phone has been find since. I'll un-install and re-install it, and re-test should someone else have a problem with it and follow up.
Reinstalling LockStar fixed the problem. Case closed.