Database Users

Something strange..for me. after herald HardSPL

I was trying to hardspl my Herald, but i received an error abot comunicating with device and i have pressed finish.
After that i saw a message on the screen of the phone if i allow an application to be installed. i pressed yes. since that moment my Herlad doesn't pass bootloader.
Today i saw something strange:
-with the main battery attached in bootloader i see a messsage in the right corner saying "RUU".
-without the battery the phone starts in bootloader but there is no message in the right corner.
If i use mtty.exe and input the password i receive the following text
-----------------------
password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
------------------------------------
I don't know what RUURUN fail means...
i tried to flash the WM 5 and WM 6 spanish ROM from HTC website but i receive the same error : 300 invalid update tool.
What tools can i use to see if something is going wrong and what..
Thanks in advance!
i saw that the command set 32 is not functioning well, i receive error, and when i use the commands ruurun 0 an ResetDevice the phone shuts down and does not start.

Did you have an SPL of at least 4.0.x.x before you began?
Either way... not a good thing...
I'm not an expert on this, though, so I'll let other people answer.

????
does it still have a bootloader screen?.....if so try a different SPL....see if that works

ivanmmj said:
Did you have an SPL of at least 4.0.x.x before you began?
Either way... not a good thing...
I'm not an expert on this, though, so I'll let other people answer.
Click to expand...
Click to collapse
i had the exact ipl/spl that was shown after the upgrade, nothing changed 1.08.0001
How do i must change the SPL ? even with the ROM from HTC website i receive the error 300. invalid update tool.
i think something was changed in Bootloader but don't know what.
I need an advice from someone with better experience with Herald.
I saw that hardSPL from olipro uses JumpSPL, enablerapi.exe, and the image to be flashed.
When i ran the setup i didn't accepted the use of enablerapi or jumpspl so the flash finished before starting and gave me an error that it cannot communicate with the device.
So AFTER i received this message and so the flash process ended without even beginning to flash i assume that i have installed only jumpspl.exe or enablerapi.exe. i don't know for which one the message was because the language was spanish and i don't understand wery well.
so the effect of softspl how can be removed??? i know it loads a custom spl in ram but .......that's where my knowlege ends....

The HardSPL bricks devices with low SPLs. I'm sorry. I could be wrong, I'm not an expert in the field.

yes, now i know that. only that olipro does not write anything about that in his first post, not even now when there are a lot of people who had the problem.
but there is something strange with hardspl.... don't know what modifications is making and why not all of them...

It has to do with the IPL\SPL you have on the phone already. The patched SPL is only compatible with certain types.

i will go to HTC support. one man there told me it will cost 40 euro...i hope i will return it to life...

laseru said:
i will go to HTC support. one man there told me it will cost 40 euro...i hope i will return it to life...
Click to expand...
Click to collapse
You were warned though.. If you would have red further
you could have know it could happen with lower SPL..
Sorry mate
Ask Olipro in it's thread..?

there are a lot of requests for olipro....
and why read all thread when it is simple to write a warning on first page.
i agree that he is doing hardspl for everyone but i have a feeling that it is a unfinished...and with all the people who failed i think is better to stop sharing hard spl if he is unable to warn people.

CId error after wrong flash

I have HTC 4350, started WM6 upgrade, but the battery got out and the process interrupted, now can't update with the official update for this phone,
invalid update tool, error 300
In bootloader there is such info
ipl 1.09.0001
spl. 1.09.001
I have another 4350, alive, same country id. How can I make dump and flash the dead one?
Mtty says like this :
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
Cmd>

I was going to recommend flashing via sd card, but it seems since your SPL showing on the bootloader is lower than 4, you will brick your phone more (if that's posssible) when using a .nbh file. Here is how to flash a os.nb file which is seeming to be your last option. You'll have to search around to see if that is available through SD card though. Sorry you're having such a big problem, hope you get it solved.

Sounds like either your SPL was being written when the battery was pulled. Or the flashing flag was never cleared. Try this out. It has never been tried on a Herald, that I know off, but it might help you out, especially since you already seem to know how to use Mtty.

Hi,
I've had the same MTTY output. You are lucky. As far as I know there is only one method which can help you.
Read my thread and you will know everything you need to unbrick your Herald:
http://forum.xda-developers.com/showthread.php?t=417930
Alva said:
I have HTC 4350, started WM6 upgrade, but the battery got out and the process interrupted, now can't update with the official update for this phone,
invalid update tool, error 300
In bootloader there is such info
ipl 1.09.0001
spl. 1.09.001
I have another 4350, alive, same country id. How can I make dump and flash the dead one?
Mtty says like this :
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
Cmd>
Click to expand...
Click to collapse

Great thanks to mkoz
According to his solution the device as alive!

XDA Obrit brick?

Hallo to all the Experts here, and sorry for my bad english.
This is my fist posting here, but i read alot.
I bought an O2 XDA from ebay, that stuck in the bootloader.
USB connection works.
If i do an Hardreset it stuck in the O2 screen showing:
IPL 3.04.0001
SPL 3.04.0000
nothing else
MTTY log:
set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>getdevinfo
GetDeviceCID: Error - InitDecoder
HTCSARTE20000Ÿ3áOHTCE
Cmd>
i don`t know if its cid unlocked, but i dont think so, because i can`t flash any roms (original/cooked).
If i flash an original update it began to update till 3% than shutdown the telephone and the programm says invalid Vedor-ID.
i looked into some nbh with an hex-editor but i only find ARTE1000 or ARTE**** but not ARTE2000, could this be the problem?
please help me to find the right Update and i would be grade, if you post links so i can try it
Thanks

Arte300 only show htc

sir
when i power on my arte 300 show only htc i do the hard reset but same i update with many rom but still same after two pesent error
my phone 3350 spl version spl 3,17.0000 and ipl version 3.17.0001
sir please give me the same version rom
thank you

Hi to you and all member..
i face to this problem after unlock cid..
whats your solution for repair this?
and body have original rom for arte300?

write here yor it SN please,i find your official rom

Hi to you mate..
This is SN number:SZ723FX00585

Sorry,can't find nothing info about you SN. From where is your phone?more info.pls

I provided it from iran...i think correct model is arte30000

this is info of my htc..
HTCSFHTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>getdevinfo
HTCSARTE30000q¨ÿÙHTCE

Download and open SnoppyPro.Then run mtty the commands password and getdevinfo,save your log and open it with tiny hexer,will be find your completley CID.Leave'me know it.thanks and succes.
or contact'me on [email protected]

http://www.mediafire.com/?xoyngg2jczd
download this,first run uspl http://forum.xda-developers.com/showthread.php?t=311403

[Q] Stuck in Tri Colour while Patching HTCP3400i

Hi,
I desperate need some guidance.
I have been following the Step by Step Guide by Mr Krazy for Ugrading P3400i rom. It sad to say Im stuck at step 5 (Use Orefkov Unlocker) after using the Olipro method first.
Now, my phone is at the tri colour with SPL 1.10.Olip displayed and with USB text at the bottom left. Here, I gathered my gene is new as the phone is not booting with patched SPL 1.10.Olip as mentioned in the Guide, that means my phone is with new gene, right?. I then follow exactly as per the Guide to run the Mitty1_42 to install Orefkov Unlocker for new gene. But then I get the following message after command set 32 1:
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Cmd>
I noticed there are some errors command at the end of the above message. Anyway, i try the next stage by typing ls boot.bin at the cmd> prompt and hold down camera button and press enter key on computer but there is no white screen even after some time as suppose to be according to the Guide. Nothing happend at all even in the Mitty screen in my computer.
So basically I'm stuck here. Don't know what to do. Phone is still on tri colour. I have done the following while doing the above steps and don't see what's wrong.
- No SIM loced
- Unchecked the checkbox enable advance network functionally in my phone for active syn.
- Killed the Active Sync named as wcescomm.exe. Im using Window XP so understand that no need to update driver for active syn (Note: I do see the "USB" button in Mitty window and that means up to here everything is OK).
I have gone through the forum but nothing of the similar nature. Will doing hard boot helps? I know my phone is not bricked, so I need desperate advise/help on the next step and I know some expert is kind enough.
tks
PS: I hope this thread will get to Mr Krazy attention as I don't know how to send to his attention.

Sorry, realised this message should not be in this catergory but don't know how to move to the proper catergory.
Need Advise said:
Hi,
I desperate need some guidance.
I have been following the Step by Step Guide by Mr Krazy for Ugrading P3400i rom. It sad to say Im stuck at step 5 (Use Orefkov Unlocker) after using the Olipro method first.
Now, my phone is at the tri colour with SPL 1.10.Olip displayed and with USB text at the bottom left. Here, I gathered my gene is new as the phone is not booting with patched SPL 1.10.Olip as mentioned in the Guide, that means my phone is with new gene, right?. I then follow exactly as per the Guide to run the Mitty1_42 to install Orefkov Unlocker for new gene. But then I get the following message after command set 32 1:
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Cmd>
I noticed there are some errors command at the end of the above message. Anyway, i try the next stage by typing ls boot.bin at the cmd> prompt and hold down camera button and press enter key on computer but there is no white screen even after some time as suppose to be according to the Guide. Nothing happend at all even in the Mitty screen in my computer.
So basically I'm stuck here. Don't know what to do. Phone is still on tri colour. I have done the following while doing the above steps and don't see what's wrong.
- No SIM loced
- Unchecked the checkbox enable advance network functionally in my phone for active syn.
- Killed the Active Sync named as wcescomm.exe. Im using Window XP so understand that no need to update driver for active syn (Note: I do see the "USB" button in Mitty window and that means up to here everything is OK).
I have gone through the forum but nothing of the similar nature. Will doing hard boot helps? I know my phone is not bricked, so I need desperate advise/help on the next step and I know some expert is kind enough.
tks
PS: I hope this thread will get to Mr Krazy attention as I don't know how to send to his attention.
Click to expand...
Click to collapse