i'm trying to create a gold card for my MyTouch 3G and i'm following the instructions from www.theunlockr.com
i am running Windows 7 RC1 64-bit and have installed the 64 bit usb driver from "android-sdk-windows-1.5_r3"
i executed the following step:
Type the following into the command dos prompt on the computer (the black screen with white letters that just opened) while the phone is connected through USB, hitting enter at the end of the line:
cd\
cd androidsdk\tools\
fastboot devices
i verified that it worked as it showed my serial number XXXXXXXXXXXX fastboot
proceeding ahead, i got to the step where i had to execute the following command:
cd\
cd\AndroidSDK\tools\
adb devices
it simply states "List of devices attached" and nothing more. i have verified that i checked USB debugging.
has anybody had similar issues?
i fixed the issue. d'oh!
i downloaded USBDeview and ran it as administrator. i uninstalled all htc android related drivers and unplugged the phone from the PC. then i plugged the phone back in via USB cable and windows detected & installed the drivers automatically.
afterwards, i ran the adb devices command again and it showed my device was attached.
tuffCookie said:
i'm trying to create a gold card for my MyTouch 3G and i'm following the instructions from www.theunlockr.com
i am running Windows 7 RC1 64-bit and have installed the 64 bit usb driver from "android-sdk-windows-1.5_r3"
i executed the following step:
Type the following into the command dos prompt on the computer (the black screen with white letters that just opened) while the phone is connected through USB, hitting enter at the end of the line:
cd\
cd androidsdk\tools\
fastboot devices
i verified that it worked as it showed my serial number XXXXXXXXXXXX fastboot
proceeding ahead, i got to the step where i had to execute the following command:
cd\
cd\AndroidSDK\tools\
adb devices
it simply states "List of devices attached" and nothing more. i have verified that i checked USB debugging.
has anybody had similar issues?
Click to expand...
Click to collapse
i am having the same issue with my HTC Dream
tuffCookie said:
i fixed the issue. d'oh!
i downloaded USBDeview and ran it as administrator. i uninstalled all htc android related drivers and unplugged the phone from the PC. then i plugged the phone back in via USB cable and windows detected & installed the drivers automatically.
afterwards, i ran the adb devices command again and it showed my device was attached.
Click to expand...
Click to collapse
This worked for me ... interesting how you have to Uninstall HTC drivers for an HTC device to work!
Related
Hi,
need some help with fastboot.
Entering "./fastboot devices" gives no results.
Streak waits with white screen and displays FASTBOOT_MODE.
I did not install the SDK, but took the adb tool from the current SDK.
Entering "./adb devices" list one device - works!
I noticed that it is important to use the adb from the current SDK currently adb version 1.0.26 (an old adb version 1.0.25 did not work).
Streak with Stock Froyo
Linux / Ubuntu 10.04
Streak is recognized as (lsub): Bus 001 Device 011: ID 413c:b007 Dell Computer Corp.
Any idea? Are there different fastboot-binaries out there? All the ones I have found are 127435 bytes.
Thanks a lot
Arnd
I have exactly the same problem on ubuntu 10.04 with standard 2.2 Froyo.
adb devices shows the Streak but fastboot devices shows nothing. I have played with this for a while without success. I would love to have this working any help would be appreciated. I am using android-sdk-r07-linux_x86.tgz and fastboot 130.4 kb.
The streak is detected on USB and I can turn on and access USB storage.
Solved
Just found out, "./fastboot devices" simply does not work - unfortunate.
But try "sudo ./fastboot -i 0x413c reboot" - this will show "rebooting..." and actually reboot the device. Must be with sudo.
That means fastboot works.
I suppose, no need to install the SDK, no need to put any rules files into /etc/udev/rules.d
Arnd
You have a problem with ADB on your (X)Ubuntu? "ADB not found", "No Device connected" even you set USB debugging?
I got the same problems when I started to play around with Xubuntu.
So I wrote a tutorial how to get ADB running properly under my Xubuntu installation.
Maybe it helps some people.
ADB on (X)ubuntu
I've enabled "USB debugging" under Settings-->Applications-->Development.
And when I directly connect the USB cable to my Ubuntu machine "lsusb" shows nothing.
I also get no USB icon in notification area on my tablet.
What am I doing wrong?!
Please help!
Worked beautifully
Thanks for the adb tutorial. I am running xubuntu on an old Dell Inspiron 1318.
Some tips I found help:
1. I used leafpad to create the 51_android... File
2. I added both "0x1949" and "1949" vendor IDs
3. As soon as I did this adb recognized my device in TWRP with a regular usb cable.
4. I had to execute each adb command with the "./" prefix, state such as "./adb devices"
5. I side loaded cm10 zip and rebooted in TWRP
6. Then I side loaded gapps zip and rebooted
Voila!
Thanks Hascode, PowerPoint 45, and others!
I rooted my NC and fixed the USB and ADB drivers. After NC is connected to WinXP system, everything works fine. There are two devices showing up. One is USB mass storage, the other is "composite adb interface".
But I can only remove USB mass storage devices safely. When try to remove "composite adb interface", it says "the device android composite adb interface cannot be stopped because a program is still accessing it".
It must be the process adb.exe that is using the device. How to safely stop it and remove the NC?
go to command prompt and type adb kill-server
DizzyDen said:
go to command prompt and type adb kill-server
Click to expand...
Click to collapse
it works. thanks
Hi.
I have a nexus 7 2012 edition which turns on with The Google written logo and under the screen with a padlock. After that it will be in bootloop with a black screen ( I can see the backlight turning on/off). This is also if pressing the power+volume down combination. Seems bootloader is corrupted. Anyway I installed everything on pc plus I'm using the WugFresh Nexus Root Toolkit and here are some examples which show what errors I'm encountering when trying to flash stock firmware .
Log:
Checking ADB/FASTBOOT Connectivity
adb devices
015d4a5ed8500c01 unauthorized
fastboot devices
There is also a notification popup which tells me:
"An ADB Interface device was found but it was listed as "unauthorized"
-Accept the RSA security prompt and check "Always allow from this computer"
At this point I don't know what to do, can you help me?
Same issue - following
I have the same issue now after trying to flash a kernel to fix the slow charging issue. Following this post for any update.
Sunil_511 said:
I have the same issue now after trying to flash a kernel to fix the slow charging issue. Following this post for any update.
Click to expand...
Click to collapse
Hi, Sunil_511...
Bit speculative this, and I can't say for certain if the following solution would work, because I've never had this problem myself. It also requires that your Nexus 7 be in a fully bootable state.
Go to your Nexus 7 Developer Options in the devices settings and tap on 'Revoke USB debugging authorisations'. Tap on OK to confirm. See attached screenshot.
This, theoretically, should wipe the slate clean.
Reboot both your N7 and your PC/laptop and when you next reconnect your N7 to your PC/laptop, you'll be asked to authorise this new USB connection when you perform some action that requires it.
Well, that's the plan anyway.
Good luck?.
Rgrds,
Ged.
Nope, in my case my tab is not booting to recovery or system. The only option is adb and it is showing unauthorized. My last option what i think off is to change the motherboard.
Following
I have the same error and like to follow
Sunil_511 said:
I have the same error and like to follow
Click to expand...
Click to collapse
Google search is your friend. I found the following two methods which seems to have worked for some people.
1. If you are using OS X*:
Reboot your phone into recovery mode.
Connect it to your computer.
Open the terminal and type:
cd ~/.android
adb push adbkey.pub /data/misc/adb/adb_keys
All done! Just adb shell reboot and feel the power!
*For Windows 10, .android directory is located in your the base of your C:\User\user_name directory.
2. Go to where you have stored adb files, open that folder and press "CTRL+SHIFT+Right Click" and select and click on Open Command Prompt option
Now enter following command
adb start-server (Enter)
adb usb (Enter)
After that your device is no longer unauthorized and you should be able to use any command in your Android Mobile using PC/ Computer.
If these fixes don't work, SEARCH.
thanks buddy, i have tried pushing the adb keys but no luck. I will try tge second option. Will let you know after trying.
No difference still the same
BxG4ever said:
Hi.
I have a nexus 7 2012 edition which turns on with The Google written logo and under the screen with a padlock. After that it will be in bootloop with a black screen ( I can see the backlight turning on/off). This is also if pressing the power+volume down combination. Seems bootloader is corrupted. Anyway I installed everything on pc plus I'm using the WugFresh Nexus Root Toolkit and here are some examples which show what errors I'm encountering when trying to flash stock firmware .
Log:
Checking ADB/FASTBOOT Connectivity
adb devices
015d4a5ed8500c01 unauthorized
fastboot devices
There is also a notification popup which tells me:
"An ADB Interface device was found but it was listed as "unauthorized"
-Accept the RSA security prompt and check "Always allow from this computer"
At this point I don't know what to do, can you help me?
Click to expand...
Click to collapse
tnsmani said:
Google search is your friend. I found the following two methods which seems to have worked for some people.
1. If you are using OS X*:
Reboot your phone into recovery mode.
Connect it to your computer.
Open the terminal and type:
cd ~/.android
adb push adbkey.pub /data/misc/adb/adb_keys
All done! Just adb shell reboot and feel the power!
*For Windows 10, .android directory is located in your the base of your C:\User\user_name directory.
2. Go to where you have stored adb files, open that folder and press "CTRL+SHIFT+Right Click" and select and click on Open Command Prompt option
Now enter following command
adb start-server (Enter)
adb usb (Enter)
After that your device is no longer unauthorized and you should be able to use any command in your Android Mobile using PC/ Computer.
If these fixes don't work, SEARCH.
Click to expand...
Click to collapse
Tried your suggestion.. Which i might have tried eventually from googling.. Doesn't make any difference.
Fixed
After doing all the researches, i had to buy a new motherboard and then replace it. Installed new rom and now using it. Spared about 1400INR for a 32 gig version.
Y cant i get fastboot drivers to read in Windows 10. I have updated the software to the latest update. Developer options are turned on. USB configuration is set to file transfer. In a regular state Windows 10 readds the phone and I can access the contents of the phone. I opened a power shell (regular and as admin) I typed "adb devices" it reads. (I have enabled advanced reboot.) I use the command "adb reboot-bootloader" in boots to fastboot. Now it loses connection. I Open the Run dialog box by pressing Windows Key+R. Type “devmgmt.msc” besides Android is a yellow triangle, then click Update Driver.A new window will pop up. Select the ‘Browse my computer for driver software’ option. I copied the drivers from the OnePlus 5 folder. Try to install but nothing. This is where in stuck. Please help. Thanks
trulane said:
Y cant i get fastboot drivers to read in Windows 10. I have updated the software to the latest update. Developer options are turned on. USB configuration is set to file transfer. In a regular state Windows 10 readds the phone and I can access the contents of the phone. I opened a power shell (regular and as admin) I typed "adb devices" it reads. (I have enabled advanced reboot.) I use the command "adb reboot-bootloader" in boots to fastboot. Now it loses connection. I Open the Run dialog box by pressing Windows Key+R. Type “devmgmt.msc” besides Android is a yellow triangle, then click Update Driver.A new window will pop up. Select the ‘Browse my computer for driver software’ option. I copied the drivers from the OnePlus 5 folder. Try to install but nothing. This is where in stuck. Please help. Thanks
Click to expand...
Click to collapse
Hello, please use the drivers provided here if not tried yet https://forum.xda-developers.com/on...k-bootloader-flash-twrp-t3624877/post72748916
Thanks that's the guide I used 2 flash, n install magisk. I jus used one of the options that was listed on the computer, I was a random Google drivers. Then it lit up. Thanks 4 the guide, it was very helpful
Done