...dont know what have happend. I dont get the alternative to turn of the alarm, i have to restart it to get it to stop. Is there a quickfix to this bug or an app that works better or something?
Go to Start-Settings-System- Clocks and Alarms-Alarms
Make sure none of the three are ticked.
well i am useing it as my alarmclock in the morning. So thats not the problem. The problem starts when the alarm goes off. I used to get a turn of alarm/snooze buttons on the screen to turn off or not, but that doesnt show.. and when i open de settings for the alarm and unklick in the checkbox it still dont turn it off.... wierd.
i belive i have a similiar problem.. the "pop-up box" asking you to wether to turn of or snooz your alarm has dissapered and won't come out again. yet you can (if accurate enough even though you just woke up) tap the small bell-icon in top of screen bringing up a larger screen with those present icons, click the bell icon again (less accuracy this time) that action will bring up this pop-up box and you get to choose, turn of or snooz. GL
I belive that
Start/System/Clocks and Alarms/Alarms
and from here navigate to the second tab.
Chose the event Reminder and check the event called 'Show alarm on screen'
I do have a danish ROM - I do hope and believe tha I'm on track with the naming of the menus/events.
I have trouble with it too - it seems that it now and then gets unchecked perhaps on a soft reset - I haven't figured out yet - but It's noticed when my alarm goes of in the morning, if I can or can not stop it easily.
As described, clicking on top i taskbar on the Bell is the way to hit the alarm if no popup is available.
Kindly
Related
the phone will not stop alarming and it does not give me the option to turn off the alarm or even see the notification. I have tried a soft reset and also turning off all alarms, along with the notifications and sounds settings. If I turn all the sound settings down to zero the phone does not audibly alarm but it still vibrates, even though the vibrate feature is turned off. All started when I dropped my phone.
I cannot figure out how to fix this, and its driving me insane!!!!!!!!!!!!!!
IPL 1.08
SPL 1.08
GSM .1.09.10
OS 1.8.10.2
HTC WIZARD
T MOBILE MDA
I am having this same problem right now and it is very annoying. Any help would be greatly appreciated.
kelzud said:
the phone will not stop alarming and it does not give me the option to turn off the alarm or even see the notification. I have tried a soft reset and also turning off all alarms, along with the notifications and sounds settings. If I turn all the sound settings down to zero the phone does not audibly alarm but it still vibrates, even though the vibrate feature is turned off. All started when I dropped my phone.
I cannot figure out how to fix this, and its driving me insane!!!!!!!!!!!!!!
IPL 1.08
SPL 1.08
GSM .1.09.10
OS 1.8.10.2
HTC WIZARD
T MOBILE MDA
Click to expand...
Click to collapse
Its a notification problem - use check notification to delete duplicate notifications (only delete these not all of them) Click options/settiings and tick both boxes. There may be a null notification that is often a problem that you will need to click on and delete.
Run exe on pc desktop after activesync your device.
how do you get there
I cannot find the area that you are talking about. can you give a more detailed way of getting to that area with the names of the windows that I need to click on? Thanks,
Dave
Re: how do you get there
kelzud said:
I cannot find the area that you are talking about. can you give a more detailed way of getting to that area with the names of the windows that I need to click on? Thanks,
Dave
Click to expand...
Click to collapse
I assume the program is installed on your device. Click on check notifications icon in startmenu\programs. Click on options then settings and tick remove duplicate events box and remove script 0x000 box then ok. Then click clear and it should clear all duplicate notifications for you.
I actually had the exact same problem on my 9100. After a couple of days I simply went ahead and made a hard reset....and havent had the problem since
Jakob
I had this problem a couple of times as well. Clearing duplicate notifications (using CheckNotifications or MemMaid) and the offending notification does NOT solve the problem. It will stop the errant alarm, but the next time one of your regularly scheduled alarms goes off, you will have the exact same problem. It's as if there's some error in the program which is responsible for creating the little box with the alarm message in it and switching the left soft key ot a dismiss button.
So unless you plan on never again using your alarm clock or setting reminders for anything, jacking with the notifications will not solve the problem.
The only way I have been able to fix the problem is with a hard reset. I'm sure there has to be some other way, but I sure haven't found it yet.
Is there a cure for this or no? I just downloaded check notification and ill give it a shot, but so far it shows no duplicate alarms on my system which i find hard to believe...
Did you tick both boxes in the options and delete a notification called null - have to click and hold to delete it. The alarm notifications are under clock.exe - delete all manually if not showing up duplicates. (click and hold)
Don't use WM 5 alarms at all
I use ActiveKitten's Chronos Alarms - no worries at all!
I also had this problem and a hard reset was the only thing I could do. Afterwards I restored my backup and never had the problem before.
Please help. today something strange happened, when my alarm goes of I dont get the yellow popup message which allows me to turn of the alarm. I have not made any changes to the settings.
I have to turn of the phone to get it stopped
I to am having the same problem I used to get the tab asking me to disable the alarm
and now have to turn the phone off to stop the alarm
I had same problem.
Try Klaxon .
Now alarm works fine at least in my diamond.
GO TO SETTINGS/sounds¬ifications/notifications.then in events scroll to reminders then tick the box for display message on screen tab
deeman said:
GO TO SETTINGS/sounds¬ifications/notifications.then in events scroll to reminders then tick the box for display message on screen tab
Click to expand...
Click to collapse
Even when doing this I am able to disable/turn-off the alarm!
When doing a soft-reset during boot the alarm occurs and there is no way to disable this ****!
(occurs since yesterday on my MDA Compact II / WM5 and this *** alarm clock drives me crazy)
Seems to be a "common" problem ... Is there a free utility to cleanup clock.exe notification queue...!?
M$, can't be serious that there is no M$-fix for this annoying bug! Hard-reset is no option!
Hi ppl,
I have a big problem with alarm in my D2. If i set alarm and send D2 to stanby, alarm dont beep This is a big problem to me. I need safe batery, but i need alarm too...I try Klaxon, but i have with them the same problem. Can help me anyone? Can i set anythink to wakeup D2 when is in stanby?
thanks for answers
I know that it wont beep for text messages notifications are you using any roms if you are install advanced config and under power management set the battery usage to 10 minutes if not using a rom go to the htc website and download the sms fix
I using TD2 tools, i have sms tone fixed. But alarm is dead alltime
How i can change registry(must have any program ? ) Can i change any in registry how about change sms wake up from standby?
My ROM 1.39.479.1
Ropik said:
Hi ppl,
I have a big problem with alarm in my D2. If i set alarm and send D2 to stanby, alarm dont beep This is a big problem to me. I need safe batery, but i need alarm too...I try Klaxon, but i have with them the same problem. Can help me anyone? Can i set anythink to wakeup D2 when is in stanby?
thanks for answers
Click to expand...
Click to collapse
Have exact same problem, think there must be something related to the amount of time the phone has been in standby too, if I test an alarm, by setting it to go off in 10 mins for example, it works fine, left overnight, never works....
I had issues with the alarm after using Klaxxon and uninstalling it.
I am currently testing to try and get it working each time and seems to be ok.
I reinstalled Klaxxon ticked force remove windows alarms and intergrate applyed the changed and soft booted the phone.
I then started klaxxon again and remove both ticks and soft reset again.
I then used AlarmFixWM to remove duplicate entries from the notification queue.
Not 100% if this now works 100% but seems promising.
Im sure there is an easier way but the above its what I did.
Found this thread which seems to be related
http://forum.xda-developers.com/showthread.php?t=333521
Have installed SK tools, cleaned notification queue and set it to run cleanup auto in middle of night....
Alarm actually went off this morning...
Hardly conclusive, but gives me hope!
Odd, seems to be a longstanding WM2003/5/6/6.1 issue, not TD2 specific, but I moved to topaz from an artemis where I never had a single alarm problem... you would think if the artemis hardware could cope with my appointments list/alarms etc. then a topaz would be fine too...
P.
Alarm sounded again this morning
Happy Days...
Will post back here if problem reoccurs,
Otherwise, assume this has worked for me.
P.
Hey popkid,
Any chance you could post exactly how to do this using SK tools? I cant seem to figure it out and I have this annoying alarm problem!!!
Cheers
philaldred said:
Hey popkid,
Any chance you could post exactly how to do this using SK tools? I cant seem to figure it out and I have this annoying alarm problem!!!
Cheers
Click to expand...
Click to collapse
1) Fire up SK Tools
2) Hit Tools (Bottom Right) --> Settings
3) 2nd Tab "Automation"
4) Toggle "Notifications Queue" to "Use in Auto Mode" if it isn't already
(Take a look through other run options to run and deselect them if you don't want them running automatically)
5) Toggle "Scheduled Run" to "Yes"
6) Set time/day/date etc. to run (Mine is set to run at 3.30am every day, probably overkill!)
7) Set "Silent Mode" to "Yes"
and you are good to go
Alternatively, to fix your Notifications Queue just once:
1) Fire up SK Tools
2) Category (Bottom Left) --> Maintenance
3) Select "Notifications Queue"
4) Action (Bottom Left) --> Mark Duplicates (should be a fair few if you are having alarm problems)
5) Action (Bottom Left) --> Delete Marked
Hope this helps, post back if not!
Good Luck
Pauly
Thanks Pauly, ill see if G-alarm wakes me up in the morning!!
Dunno if you guys can help, i got Klaxon and alarm is fine, but if i snooze using shake then it never goes off again!
Can you show me your settings or give me any ideas?
My solution: Whatever alarm you have, install HTCPedia Topaz Setting Tool, go to Power Settings and set AC Resuming and Battery Resuming to 20 seconds, works EVERY DAY for me with Klaxxon.
That change made no difference when I was having my difficulties, think that gives the device longer to process your notifications queue if it is large, but if the notifications queue has other issues then it won't help.
P.
Edit: SFAIK Think G-Alarm changes both of these registry values to 120 seconds on installation, That is what they are set to on my TD2
they are located in HKLM\System\CurrentControlSet\Control\Power\Timeouts\ if you wish to edit directly,
"BattResumingSuspendTimeout" and "ACResumingSuspendTimeout"
But does that fix the snooze function?
adigraham said:
But does that fix the snooze function?
Click to expand...
Click to collapse
doesn't sound like the same problem you have to be honest, the notifications queue stuff is related to the alarm never going off in the first place...
I'm not a klaxon user, but have had it installed in the past, are you sure that you don't have the light sensor alarm deactivation switched on or it set to switch the alarm off (rather than snooze) on shake?
P.
Thanks for replying mate, how would i know about the light sensor bit?
popkid said:
doesn't sound like the same problem you have to be honest, the notifications queue stuff is related to the alarm never going off in the first place...
I'm not a klaxon user, but have had it installed in the past, are you sure that you don't have the light sensor alarm deactivation switched on or it set to switch the alarm off (rather than snooze) on shake?
P.
Click to expand...
Click to collapse
I thought there was an option in Klaxon itself to use the light sensor to deactivate the alarm when a light is switched on?
Ah... Ok... just checked Klaxon release docs and it seems that isn't implemented yet... so thats a red herring!
It does say though... flip phone over to snooze
and shake to deactivate
I'm guessing that whatever you are doing is triggering the deactivation rather than the snoozing....!
One way to check, if you enable the integration to TF3D in klaxon then the time noted for the next alarm on your front page should increment to the next alarm set once the alarm has been deactivated, but not if it is snoozed, I think anyway.
P.
hey, yeah sorry i turn it over! it used to work with stock rom i think .. do you know what each option does in klaxxon? might just try g-aram or something?
popkid said:
I thought there was an option in Klaxon itself to use the light sensor to deactivate the alarm when a light is switched on?
Ah... Ok... just checked Klaxon release docs and it seems that isn't implemented yet... so thats a red herring!
It does say though... flip phone over to snooze
and shake to deactivate
I'm guessing that whatever you are doing is triggering the deactivation rather than the snoozing....!
One way to check, if you enable the integration to TF3D in klaxon then the time noted for the next alarm on your front page should increment to the next alarm set once the alarm has been deactivated, but not if it is snoozed, I think anyway.
P.
Click to expand...
Click to collapse
No, sorry not sure, guess there is some sort of sensitivity set somewhere where it determines whether you are shaking or just turning over, I used to use the turn over function in klaxon when I had it and it worked fine... in G-alarm I get what you describe btw the sensitivity is set such that when I turn it over it thinks I'm shaking it and deactivates, so that may not provide the fix you are after either... and G_alarm isn't free... if you hunt around, I'm sure there was another klaxon thread on here (possibly by the developer himself) that had some details of the sensitivity being changed between releases, may be a reg edit you can do to fine tune it?
Good Luck!
P.
Ok thanks for your help fella!
What rom you running btw?
popkid said:
No, sorry not sure, guess there is some sort of sensitivity set somewhere where it determines whether you are shaking or just turning over, I used to use the turn over function in klaxon when I had it and it worked fine... in G-alarm I get what you describe btw the sensitivity is set such that when I turn it over it thinks I'm shaking it and deactivates, so that may not provide the fix you are after either... and G_alarm isn't free... if you hunt around, I'm sure there was another klaxon thread on here (possibly by the developer himself) that had some details of the sensitivity being changed between releases, may be a reg edit you can do to fine tune it?
Good Luck!
P.
Click to expand...
Click to collapse
SOLVED (sounds & notifications settings)
Before when notifications (and most importantly the alarm) went off I am 99 % sure I used to get the popup menu at the bottom of the lock screen with options to either dismiss or pause the alarm. Lately this option on lock screen has now disappeared. Now when the alarm wakes me in the morning I have to unlock the phone, tap the notifications bar on top of the screen to get to the notifications menu and tap the alarm to get to the pop up menu for the chosen notification. If you just want to snooze the alarm, you'll be wide awake by the end of this series of touches.
Do people get the notification popup menu on their lock screens? I sure would like to get this back. Anyone?
PS: I think that this was OK on several occations between my last program install (I think this was updating the cookies home tab to 1.6) and when I first noticed the problem, but I can't really swear on it.
PS2: I have searched to find a thread with this issue, but have just found slightly relating topics (ie in http://forum.xda-developers.com/showthread.php?t=612775&highlight=notification+lock it seems a guy had to unlock to dismiss but I'm not sure if that was due to password lock. And I did try the "Clean notifications" with pmClean as suggested by post #6. I'm not really sure if this worked though, because it says that the number of notifications are 19 both before and after I apply the cleanup. Does this mean the program doesn't work?)
do you have bsb tweaks installeD? Turn on 'dismiss x notifications' tweak. That reenables the snooze and what not,
also,
settings tab - menu - all settings - sounds & notific - notifications.
call up teh notification you are interested in (new message, for example) and tick 'show on screen'.
Give those a try, see if they help. (Soft reset to make sure teh settings are changed.)
Thanks so much. It was the sounds & notifications settings that did it.
Feeling kind of silly now that it was just a simple setting . But I'm pretty sure I haven't changed it myself so I guess I just assumed it would be something more severe.
Anyhow. PROBLEM SOLVED.
Problem solved! I also forgot that I had already done this before I did a hard reset! Thanks for this post though!
Hi Guys,
I have got the same problem (no dismiss showing up in lock screen), but there is no option for alarms in the Notification Settings. How did you solve it in the end?
Cheers
Does anyone have the issue of their alarm not showing up on the homescreen, even though it is turned on when you bring up the alarm setup screen? My alarm doesn't work, nor does it display, and when it says it is on. Does anyone have any insight, or fix to this problem. Any input would be greatly appreciated.
compare the alarms you set in htc with the alarm details in
settings menu all settings clocks and alarms
you may well find that one set has different alarm sound set, which may or may not even exist.
I have also seen winmo have problems with alarms if you leave the message box blank.
That unfortunately did not work, they both have matching "ringtones" and also the same description, but it doesn't show up. Any other suggestions?
in settings menu all settings sounds and notifications, notifications tab in the event drop down, select "reminders" and ensure show on screen is ticked.
oh and in clocks and alarms, alarms tab, make sure "sound even if phone is set to silent" is ticked (or words to that effect)
make sure the "S" for Saturday which is today is selected.
Heartbreak said:
Does anyone have the issue of their alarm not showing up on the homescreen, even though it is turned on when you bring up the alarm setup screen? My alarm doesn't work, nor does it display, and when it says it is on. Does anyone have any insight, or fix to this problem. Any input would be greatly appreciated.
Click to expand...
Click to collapse
Yup, I too have the same prob, I had similar probs on MANILA 2D on my ELF too..!!!
I think there's some prob with the HTC Manla & Sense..!!!
The only solution is to download some ALARM APP like G-Alarm..!!!
Mine is working fine.
MirasHD2 said:
make sure the "S" for Saturday which is today is selected.
Click to expand...
Click to collapse
That answer was almost cute... almost.
Simple solution, ready...? G-Alarm. OR, OR, OR... SPB Time.
I have this same issue, and it is not a specific rom that this bug is in because I tried a few different ones and the problem still occurred. It seems like the alarm will only turn on if you set it for the next day. If you set it two days from now then it won't show up as it being on.