Related
Ever since I got my Qtek 9000, a small but annoying problem has been plaguing me. I figured that switching to a different ROM such as i-mate's JASJAR would have solved it, but it seems to happen there, too...
My Universal becomes forgetful.
After a while of successfully toggling the Wi-Fi connection, it forgets all my access points/wireless routers and prompts me to connect and authenticate with their keys. I used to think it just forgot the WPA keys, but the available access points list just goes completely empty!
After a while of successfully using making calls or using the navigator, it needs to rediscover and re-pair my Bluetooth devices, such as my HS850 headset and my GlobalSat BT-338 GPS. The "paired" Bluetooth devices show up in the Bluetooth > Devices tab, but the headset icon never activates in the Phone applet, nor does the headset activate Voice Command. Also, when I launch my GPS software, I get a tone and a notification pops up asking me if I want to add the Bluetooth GPS device to my list.
After a while of successfully ActiveSync'ing with the 4Smartphone.net Exchange Server, it forgets the password and prompts me for it. This is just starting to happen now. I have the settings saved in a .CPF file I received from 4Smartphone.net, but why its starting to forget even this is starting to concern me.
Is anyone else having these issues, or is it just me? Am I going MAD?! :doh:
I have found that if you need to reset when certain processes are running (eg Messaging) data does get lost. I wonder if this explains your issue. PS - I have not suffered the BT issue you describe and I use 2 BT headsets.
configure ur device (add ur access points, bond ur bluetooth devices...etc.) and do a clean soft reset using psShutXP or anyother software based soft reset....
after the reset, is it all gone?
S
(i'm guessing the problem is, the device crashes and hasnt written ur customizations onto the flash disk...if this doesnt work too, u might have to try another rom! )
Dreamtheater is right.
Remember that the WM5 keeps a certain amount of data in a cache in volatile RAM. If you reset your device without this data being written to the non-volatile flash, it will be lost.
This is usually recognisable if you reset the device soon after copying a file, or receiving an email or SMS. The file/sms/email will have disappeared.
The WM5 dev blog has said that there are a few ways around this:
1. Turn the WM5 device off for a few seconds (5-10 seconds should be enough) before you reset. The operating system will write any data in volatile memory to the non-volatile flash.
2. Any application that programmatically soft-resets the device with the correct commands will force the write-to-memory to occur as well.
So try to set up your device, sync, and then TURN IT OFF for a bit, before you do a reset. If in doubt, TURN IT OFF!
Hi. This has worked for me, and solved a massive problem. Hope it helps someone else too.
Step 1:
Ensure you are trying to fix the same problem as I was by looking at the symptoms, which were:
- HTC Wizard synchronizes OK when you plug it in the first time
- It stays in sync if you leave it plugged in
- If you unplug it and then plug it back in at any time later, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync
- If you unplug it and soft reset before reconnecting then it's fine
Essentially, the Wizard was requiring a soft reset between every connection to the USB cable, or it would crash and require a reset anyway!
These issues have been discussed in about 10 threads on this board, and on pretty much every other resource for Wizards and Pocket PC devices on the net. I was, however, totally unable to find something like this which directly addressed the problem.
Step 2:
Download a program called Dr. TCP from here: http://www.dslreports.com/drtcp
Run it to open a dialog box with loads of fields with strange techy names... no, i didn't understand it either. However, I've been searching the net for days and I found an article here: http://www.pcworld.idg.com.au/index.php/id;504222574;fp;2;fpid;1277378924 which told me how to work the numbers out...
In the bottom drop-down box, select "Windows Mobile-based Device" and enter 1492 in the box next to that. That's your maximum "MTU".
Here are the settings which work for me (from the top). If i don't mention a setting, I didn't change it!
Tcp Recieve Window: 261360
Dial Up (RAS) MTU: 1492
Path MTU Discovery: Yes
Save and Exit Dr. Tcp.
Step 3:
You need to open "Network Connections"... in XP, that's Start > Connect To > Show All Connections. I'm sure you can find it yourself. Anyway there should be an icon called "Local Area Connection (x)" with "Wireless Mobile-based Device" written in grey underneath.
Right click on that and select DISABLE. This will close your USB connection to your Wizard so those MTU settings can be applied.
Now unplug your Wizard from its cable. Here, I tried right clicking on the connection and selecting "Enable", but it just errored. So you need to unplug it.
Step 4:
Reconnect and see what happens. I am now happily disconnecting and reconnecting as many times as i like and it just keeps on synchronising itself. MAMMA MIA!
If this solves your nasty "i need to reset every time I disconnect" problems then please post here to say so. If it doesn't work then post here also, I guess. If this is a solution for you then credit for this is not mine - it's just the sum total of a lot of searching across this and other forums, websites and message boards. THANKS!
not working
These steps did not work for me.
I still have to reset the device otherwise I get this message after about 5 minutes.
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
It appears to be only a problem syncing as I can still explore the device.
well...
...that's depressing. I genuinely thought that would work for other people too.
Did you read that PCWorld article I linked to? it explains how I got those numbers... they could be different for you, perhaps?
I'll keep thinking...
I did not look at the article. I'm having other issues trying to get my 2 computers synced with my mobile device http://forum.xda-developers.com/viewtopic.php?p=234189. Once I get those resolved I can try some different things.
On my home computer I am only synchronizing favorites and files and it doesn't appear to be a problem.[/url]
Oh right ok. I read your other post too, but I only have 1 PC for home and work so i can't help with that.
Has anyone else tried this?
I am no longer having the problem since I fixed my other sync issue (multiple computers issue). I had reinstalled activesync and did a hard reset on my device so maybe something else got cleared up. I am also having much better luck with the way my device is running. Before I was getting frequent slowdowns and lockups. I am a much happier customer and will be sticking with my cingular 8125. I just love all the features, but the activesync issues and slowness was starting to get to me. I'm so glad it is all behind me now and I can start to really enjoy the thing. Although I have yet to connect my bluetooth headset, that may have caused me issues too. Sorry I couldn't be more help testing this out.
I and a work college have had this problem on both our systems and found that it was being caused by Avantgo.
It would work fine and sync every time for days until we installed Avantgo.
After these we both had the symptoms you describe in the first post until we did a hard reset and re installed everything except Avantgo, it was then fine again. As a test I then reinstalled it and it started not syncing again, my college who has not reinstalled it has had no further problems.
I have now been running for 3 weeks with no problems and no Avantgo.
If you have it installed it may be worth trying it without for a wile and see if it helps.
Didn't work for me. Still no connection when plugging in for the 2nd time. MTU value changes back to blank when opening the Dr.TCP again, the other values are ok though. But thanks anyway for the hints!
Greetings,
Andreas
Didn't work for me neither...
just to check (i know this sounds daft) but you did DEFINITELY press the SAVE button in Dr TCP before you pressed the EXIT button? can't imagine why it wouldn't store the data.
aaaaaaaaanyway i guess it's not the ubersolution i thought it was
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Any updated? I'm having this same problem, except my device won't connect at all! Even after a reset. It connected once and that was it.
Hi Silentz,
sure, I saved the settings. I'll try the ActiveSync clean install-method and report the results. 'Hope that MS will put out an update or better version soon! Rumours out there?
Greetings,
Andreas
tried and failed...
tried the above TCP solution- Not working for me either...
Found best solution. Go try the latest imate rom. You can then plug out/in the cable as many times as you want & it'll just work fine.
Bebbo said:
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Click to expand...
Click to collapse
It seems to be as soon as you access the internet through the passthru connection on Activesync. So installing AvantGo/PocketWeather might explain this to a certain degree as they may be accessing the internet.
Incidentally, how could Microsoft have stuffed up so badly with Activesync? It's a tiny program but works so badly - Couldn't a third party come up with a different version of Activesync or something? I'd pay for it if it worked better than this crock!
Just for info, the latest iMate ROM (With Push Email) does indeed seem to fix this issue. Obviously it was with the WM5 side rather than anything that could be fixed on the PC side.
My Active-sink probelms disappeared since upgrade to the latest iMate ROM. Has been working like a charm with all apps and utilities installed, Tweaks2k2, Spb Pocket Plus, Pocket Informant, Worldmate Pro, etc...
told you it works
cheers
I am running the 2.08 (Qtek test) rom and have this issue since last friday. before that never had it!!
What I changed on thursday was: enable exchange server sync and use it. because push-email si no solution for me I just disabled it and dropped the association.
Then (on friday) the trouble started.
I tried DrTCP...and ended up with a broken netlogon (secure client) service on the pc. The IS solution for that was a new image . . thank you very much.
I am back on track with the pc now, but AS still slows down my device.
Are any of you having this trouble using or have used:
-Push email
-Blackberry
What is the amount of free program memory on your device? Mine is around 6MB (probably caused by Blackberry install which I cant remove). . . .
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
I've been having a problem which has caused me to have to hard reset 2 or 3 times lately, and I'm noticing an odd problem when I re-sync with my work laptop.
Even though I go into Settings and change the Device ID back to my 'normal' ID it seems to get over written at some point with another ID by Active Sync. Why does this happen?
Having read a few threads I'm guessing that this may be connected to the fact that the old profile for a device with that ID is still in the system. I had assumed that Active Sync would recognise the device and just re-sync, but maybe it can't cope with having an 'old' ID that is the same as a device that it has never synced with before.
So do I just need to delete the old partnerships on the PC, or do I need to do anything else?
thanks
Delete the old partnership....then redo your Device ID on the Hermes and try to sync.
Still changing the Device Id.....
OK, so.....
- I deleted the partnership from both the PPC and the PC.
- Then I changed the Device ID back to the name that I normally use.
- Rebooted both machines.
- Reconnected PPC to PC.
- PPC was detected as a 'new' device
- Sync went OK
- The Device ID on the PPC has changed again
- The PPC won't sync now, but it does connect properly as I can 'Explore' it
I've had a look on the PC in Application Data\Microsoft\ActiveSync\Profiles and I can see two new folders.
- The first has the correct Device ID that I had entered into the device
- The second folder has a timestamp 5 minutes later than the first and shows the incorrect Device ID that my PPC has now been changed to
The name of the second folder is 'WM_xxxxxx' , where xxxxxx is my Windows username.
Can anyone shed any light on why this is happening?
Aside from the fact that it's very annoying I'm also considering selling my MDA Vario II and getting a Treo 750. So I really want to understand whether this problem is related to my current device or some general problem with WM5.0 or ActiveSync.
The complete setup is:
T-Mobile MDA Vario II
Corporate Dell D620 laptop
Windows XP SP2
ActiveSync 4.1
I've seen some suggestions to upgrade ActiveSync in order to resolve other sync problems, but unfortunately that isn't an option, at least not until it becomes a tested update within our corporate environment.
I suspect that there is actually something wrong with my ActiveSync installation as I have a problem where I can never actually maximise the application. Eg. it starts up when the device is connected, and appears in the task bar. But neither selecting 'Open microsoft ActiveSync', nor clicking on the tab in the taskbar will actually open the window. I will try and get ActiveSync re-installed on my PC, but I'm fairly certain this will be v4.1 again, and I'm worried that it might create even more problems!!
Hi All,
I am new to ELF i.e. HTC touch
I was expecting somebody knows the solution for my problem
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting
below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I had restarted my device many time also I had reinstall
but as the relationship between PC and Mobile device is not identified
it will giving me above error.
i had tried to find out <PROGRAMS> then <FILE EXPLORER> then <WINDOWS> then to the <TEMP> folder but I didn;t find it out on my device. Please help me in this regards.
More interesting is when I connect my device to pc the ActiceSyc 4.5 start but not able to sync, pup up with above error.
but I can clikc on explore button on Activesyc window to navigate.
Please help urgent
cheer's
Sandi
Saisan said:
Hi All,
I am new to ELF i.e. HTC touch
I was expecting somebody knows the solution for my problem
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting
below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I had restarted my device many time also I had reinstall
but as the relationship between PC and Mobile device is not identified
it will giving me above error.
i had tried to find out <PROGRAMS> then <FILE EXPLORER> then <WINDOWS> then to the <TEMP> folder but I didn;t find it out on my device. Please help me in this regards.
More interesting is when I connect my device to pc the ActiceSyc 4.5 start but not able to sync, pup up with above error.
but I can clikc on explore button on Activesyc window to navigate.
Please help urgent
cheer's
Sandi
Click to expand...
Click to collapse
Any update on this....
urgent....
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
My bet is that you have a bad USB cable.
I have definitely seen the exact error messages and problems you describe with a HTC Universal.
number16 said:
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
Click to expand...
Click to collapse
Hi number 16,
Could you tell me where exactly are located the *pst. files? When I try to run scanpst.exe, it tells me to browse to the respective file, but I can't find it.
Thanks a lot.
The .pst file is the Outlook data file. Close outlook first, and right click on the icon to go to "Properties". From there you can see the location of your current .pst file location.
number16 said:
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
Click to expand...
Click to collapse
Hi number16
Thanks for your suggestions but I had already tried steps #1 to # 4. After that I had deleted all the relationship.
Now at present I don’t have any relationship for my device to PC.(When I had plug-in my device and tried to sync through ActiveSyc 4.5 it will show me Guest or new name for relationship.)
On some different forum they have some kind of problem there it was suggested to delete the Windows/ Temp folders files so that it will resolve the above problem.
Any think else you would like to suggest.
Hope somebody help me..
Cheer's
Sandi
leondaphillips said:
My bet is that you have a bad USB cable.
I have definitely seen the exact error messages and problems you describe with a HTC Universal.
Click to expand...
Click to collapse
Hi
As I connect my device to PC ActiveSyc was automaticly runs and tried to get relationship but unfortunatly not able to sync.
I am sure my USB Cable is in good condition because I am able to transfer files from Device to PC or vise verse.
any thing else you would like to suggest.
Sandi
Saisan said:
Hi
As I connect my device to PC ActiveSyc was automaticly runs and tried to get relationship but unfortunatly not able to sync.
I am sure my USB Cable is in good condition because I am able to transfer files from Device to PC or vise verse.
any thing else you would like to suggest.
Sandi
Click to expand...
Click to collapse
Have you *tried* another USB cable?
(I know, I know... but a cable that fails to sync can transmit data, I have seen this - it is strange but true).
Also
you may inadvertently have disabled a network connection on your PC. If you connect you should see a network icon showing like it is trying to obtain an ip address. If you disable that by accident it can also prevent connections but I still think you should try a new cable then check your network connections
Yours
Leon
leondaphillips said:
Have you *tried* another USB cable?
(I know, I know... but a cable that fails to sync can transmit data, I have seen this - it is strange but true).
Also
you may inadvertently have disabled a network connection on your PC. If you connect you should see a network icon showing like it is trying to obtain an ip address. If you disable that by accident it can also prevent connections but I still think you should try a new cable then check your network connections
Yours
Leon
Click to expand...
Click to collapse
leondaphillips;
It is something Strange!!! well I will try out this solution hope it will work.
I will let you know in same post.
Cheer's
Sandi
hey i had this problem, turns out my firewall was blocking it, try turning off your firewall.....
Saisan said:
leondaphillips;
It is something Strange!!! well I will try out this solution hope it will work.
I will let you know in same post.
Cheer's
Sandi
Click to expand...
Click to collapse
Hi leondaphillips
I had tried to connect my device with new*** USB Cable.
but same thing happened it was showing same error message.
Also can;t create relationship.
help is required urently
Sandi
cones said:
hey i had this problem, turns out my firewall was blocking it, try turning off your firewall.....
Click to expand...
Click to collapse
hi cones
I had checked with Windows Firewall it shows me status OFF.
Is there were anything else I need to check?
what you exactly did when you have this problem? how it resolved can you explain on this?
Waiting for your post.
Sandi
Hey Sandi!
Have you tried unchecking the option under Settings\(System or Connection)\Usb to PC ?
Also, have you looked the pins of the miniUSB port? Are they in good shape?
Regards!
kokotas said:
Hey Sandi!
Have you tried unchecking the option under Settings\(System or Connection)\Usb to PC ?
Also, have you looked the pins of the miniUSB port? Are they in good shape?
Regards!
Click to expand...
Click to collapse
Hi kokotas
Thanks for your reply.
well I had checked below things.
under Settings\(System or Connection)\Usb to PC = checked status.
I had took new *** USB Cable*** and tried to reconect but it won;t work out.
now I am worried I am unable to syn my device to my PC.
Uregent help required.
Sandi
1. Try:
Under Settings\(System or Connection)\Usb to PC = UNCHECKED status.
2. So you've tried a new cable and nothing changed! But I told you about the miniUSB port in your phone! Do you see any broken, twisted pins in there? I'm telling you this because I had my phone's pins broken and I have no connectivity via usb anymore!
Regards!
One final thought
Hi Saisan
I would counsel that you should try another PC first.
Next step:
Unplug your device...
Uninstall Activesync, remove the registry keys for the program and reboot. Download the latest release of ActiveSync and install that.
I would also suggest you could do worse than enable "SHOW_HIDDEN_DEVICES" in device manager and remove all greyed out items under USB in device manager (WITH YOUR DEVICE NOT ATTACHED) then reboot and reconnect your device.
Failing that you probably have either a connectivity issue (physical cables or connectors) or you have a logical connection issue (I think there is a possiblity that you have inadvertantly disabled a network connection).
When you connect a WM6 device it creates a new network connection which generally appears in the system tray. If you disable this (right click disable) active sync will stop working.
If you go into your network connections folder and re-enable any items that are disabled it should work. PROVIDED YOU HAVE TURNED OFF WINDOWS FIREWALL FIRST...
It does sound like a physical cable or connection problem though.
Hope that helps
Yours
Leon
kokotas said:
1. Try:
Under Settings\(System or Connection)\Usb to PC = UNCHECKED status.
2. So you've tried a new cable and nothing changed! But I told you about the miniUSB port in your phone! Do you see any broken, twisted pins in there? I'm telling you this because I had my phone's pins broken and I have no connectivity via usb anymore!
Regards!
Click to expand...
Click to collapse
hi kokotas
I had goen throught the steps:
Under Settings\(System or Connection)\Usb to PC = unchecked.
and checked the pins are not broken and twisted but unfortunatly it is giveing me same error.
I think I will rediscribe my issue. I am able connect my device but unable to syncronize it .
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I hope now it was clear.
Cheer's
Sandi
leondaphillips said:
Hi Saisan
I would counsel that you should try another PC first.
Next step:
Unplug your device...
Uninstall Activesync, remove the registry keys for the program and reboot. Download the latest release of ActiveSync and install that.
I would also suggest you could do worse than enable "SHOW_HIDDEN_DEVICES" in device manager and remove all greyed out items under USB in device manager (WITH YOUR DEVICE NOT ATTACHED) then reboot and reconnect your device.
Failing that you probably have either a connectivity issue (physical cables or connectors) or you have a logical connection issue (I think there is a possiblity that you have inadvertantly disabled a network connection).
When you connect a WM6 device it creates a new network connection which generally appears in the system tray. If you disable this (right click disable) active sync will stop working.
If you go into your network connections folder and re-enable any items that are disabled it should work. PROVIDED YOU HAVE TURNED OFF WINDOWS FIREWALL FIRST...
It does sound like a physical cable or connection problem though.
Hope that helps
Yours
Leon
Click to expand...
Click to collapse
Hi leon
Thanks for your advice. but I had tried this think already.
I had reinstalled Activesync 4.5 on new machine and tried to get sync.
I think there were some logical connection issue on which I am unable to create the relationship with my device from PC.
I had also tried to delete all the pervious relationship's and reconnected the same.
On some other forum it was suggested to delete the files from Windows/Temp directory from Device. but in HTC Touch when I connect the device it will automatically start activesync and it was connected but not sync.
shows message:
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
please help in this regards.
Cheer's
Sandi
Hi Sandi,
Have you found a solution yet?
I've been facing the same problem for sometime now. Additionally, all files on my touch have become read-only. I can't copy, move or delete any files on the phone.