so i was flashing from dudes 1.1 to cyans 3.4.6 (been out of the game for a lil while) and i figured itd be best to wipe sd and g1. I reformatted to fat32 then made ext2 partition with paragon partition manager. After that the pc needed to restart and it all went smooth until it booted up again.
the pc wont read my sd anymore now (im using a standard SD adapter), windows will show its plugged in and reccomend me to reformat it to fat32 but then it always says formatting failed.
I tried using partiton again and all it does is read it as 7.6 gb ext2 drive, it wont let me format/reformat/delete partition/ create partition. it says something like No unallocated space.
Basically...Is my card fried? = /
I doubt its fried.
If it's fried, then windows will not even detect it.
Unfortunately, I do not know the fix.
Sounds like Vista is having problems reading the card... know anyone with a Mac or Linux box?
tissle said:
I doubt its fried.
If it's fried, then windows will not even detect it.
Unfortunately, I do not know the fix.
Click to expand...
Click to collapse
Not necessarily. I've seen this problem for bad SD cards.
Infact, mine appears to have died today too. It now says "blank SD card" and wants to be formatted. Damn.
Guess it's a trip to Fry's for me.
i tried using my linux liveboot cd, it detects it but linux wont mount..
damn frys is soo far for me ..like 45 min
so no body knos a fix huh?
if u don't need anything off the card, just format it.
from within windows just do a format.
or..
in linux, put the card in
Code:
df
find the one that matches ur card (/dev/sdb or /dev/sdc normally)
Code:
shred -f -n 0 -z -v /dev/sdc
this will completely wipe the card.
now type in
Code:
sudo gparted /dev/sdc
and recreate your partitions (i recommend a fat32 partition )
=O a fix from the sensai himself. i will try it when im home thanks so much haykuro!
tried in linux but command lead to a no such directory or file. and partition editor wouldnt show any other option but my actual hd. it says "cannot mount" when i insert it so it knows its there .. : /
Related
OK so far my problem has stumped everyone.
I have a rooted and hacked G1(HTC Dream) with a 16GB MicroSDHC that is divided into a 2GB Ext2 partition and a 14GB FAT32 partition. It worked fine for a while but then my G1 started to freeze up and reboot continuously so I took the card out and it stopped. I tried chkdsk in Vista and it hung in elevated .cmd prompt and it says i have bad sectors but it cannot fix in read only mode. I tried format in Vista and cmd and it tries, says the data is RAW and that it tried to convert to FAT but cluster size too big. Then when I try fs command for vfat in .cmd it still won't work. I used Paragon Partition Manager 9.0 PAID version to create partitions but now it hangs every time it tries to read the card and it won't format. Tried sdformatter and a low level formatter to and no good.
I have Terminal in my G1 but I am not familiar with Linux commands. I tried fdisk and it says the FAT32 is in read only mode. When I type busybox df -h it won't show the "/dev/block/mmcblk0p1" but it shows the Ext2 partition. But when I type the mount command it shows up as "rw". But i cannot access it at all to wipe the stupid card out.
HELP!!!!
1) can you mount the fat32 partition in you phone and can see the files?
2) did you tried as root *mount -o rw,remount -t vfat /sdcard* ?
Yes I tried it and it doesn't work. Is there anyway to flash the bootloader or the ramdisk?
assuming i have ramdisk.img boot.img and system.img on sdcard root and I want to copy to system files, anyone know the commands in Terminal Emulator?
Download the ubuntu live cd, burn it, then boot your computer with it. Plug your SD card into an external reader, NOT the g1. Run gparted and select the sd card from the list of drives and see if you can format or re-partition your card. If it wont let you then try selecting Device->Create Partition Table, to create a new partition table. If none of that works then either your card or card reader is dead.
Mike
Nevermind, it was a class 2 16GB card...i think I broke it...getting a class 6...
need help....
i have a 16gb class 6 and i need help or technically a walk through on how to partition this card....hence i am an extreme noob. i got into parted and it says i have a 16.1 gb so would that translate to 16001 mb? reason i ask is cause i dont know what to subtract 32mb from and such? also what is the optimal set up for a card this size? thanx in advance for any help that you guys may supply me...
TeCH NiNJa said:
i have a 16gb class 6 and i need help or technically a walk through on how to partition this card....hence i am an extreme noob. i got into parted and it says i have a 16.1 gb so would that translate to 16001 mb? reason i ask is cause i dont know what to subtract 32mb from and such? also what is the optimal set up for a card this size? thanx in advance for any help that you guys may supply me...
Click to expand...
Click to collapse
do it from phone terminal its much easier, if you need any more help pm me
i got guys thanks alot....i think ill try 42mb linux-swap to see if the hero rom will run smoother. to
JJbdoggg
Senior Member
thanx
after tryin to partition my sd, it went throught the steps then at the end it said restart needed, and after it restarted it started up in this safe mode type screen before vista loaded and said some error....did it partition the card? because when i look at properties of card it only says i have free space that is size of fat32....that i left...cant see if it made ext2
caleoss said:
after tryin to partition my sd, it went throught the steps then at the end it said restart needed, and after it restarted it started up in this safe mode type screen before vista loaded and said some error....did it partition the card? because when i look at properties of card it only says i have free space that is size of fat32....that i left...cant see if it made ext2
Click to expand...
Click to collapse
Windows cannot see ext2 partition. your best but is to open partition manager or use a linux distro to see it.
i wish Paragon didn't exist, i have seen so many problems people have been having trying to use Paragon. if everyone just downloaded a linux distro it would work perfectly every time and we wouldn't have 15 threads about Paragon problems
tubaking182 said:
i wish Paragon didn't exist, i have seen so many problems people have been having trying to use Paragon. if everyone just downloaded a linux distro it would work perfectly every time and we wouldn't have 15 threads about Paragon problems
Click to expand...
Click to collapse
i cant use that on windows vista can i?
download a linux distro and burn to a disk, then shut down your comp and reboot to the disk. then when you boot to linux click System>Administation>Partition editor. it's easier then trying to use paragon
tubaking182 said:
download a linux distro and burn to a disk, then shut down your comp and reboot to the disk. then when you boot to linux click System>Administation>Partition editor. it's easier then trying to use paragon
Click to expand...
Click to collapse
i have no idea how to use that, where do i get it from, i have eclipse on my comp but dont think that has anything to do with this
nope go here i have a step by step. i will be adding screenshots, but i didn't have a chance today as i was trying to meet up with some guy to buy my phone(tilt)
Your best bet is to start clean. Delete all the partitions so your entire sd card is "unallocated space".
Create a new partition for Fat32. Don't use all free space (Duh)
Create another partition for ext3 (use ext2 if your rom doesn't support ext3 yet). Just use all the remaining space
Windows cannot see the ext partition but if you want to see the amount of space used just open up paragon partition manager and it will tell you.
I dont know if you fixed the problem yet, but I think I have a solution for you.
If you're trying to do this using the phone to mount the sd card, it won't work when it boots up to that safe mode looking window, because the g1 won't stay mounted. You need to use a card reader, there's no other way around it that I've been able to find.
Also if you're using 64bit edition of windows vista, paragon has tons of problems. If that's the case, you need to create the recovery cd within paragon, then boot to it, and you'll be able to make all the changes there, using a card reader of course.
To check if it made the partition, just have the sd card connected to the computer (g1 will work for this) then open up paragon and open the partition manager, and where you're sd card is there would be another partition, right next to your fat32 partition. If its ext2 format it would be highlighted yellow.
PPM9 works just fine, you just have to keep remounting the SDCard when Windows reboots. I've had it dismount during the boot too, you just have to watch your phone screen and remount it if it unmounts.
I have tried all kinds of ways to partition my sd card to get data2ext to work on b 0.5.
- Partitioning through rom manager
- Partitioning through paragon partition manager (didn't even work)
- Manually partitioning by running commands through terminal emulator
I manage to get the linux swap and fat32 partition but no matter which method i tried, i just can't get the ext2 partition. On the emulator, it asked if my file system was an ext2 system.
By the way, i am using an 8gb sd card that came with Nokia 5800. Is this the cause of not being able to create the ext2 partition?
Easiest way I can think of is to use the live distro of Gparted.
http://gparted.sourceforge.net/livecd.php
Awesome partitioning tool and has a gui anyone can follow.
E.E.
i just partioned my 8gb yesterday with paragon, no problems. what kind of problem did you have?
@eepunk I will try that later... i'll see if there is any solution in the current software(s) i have...
@haha123 the problem i'm facing is i cannot see the sd card when i click format partition... Maybe i'm doing it wrong. Here is how i do..
1. Plug my phone into USB and click Disk Drive
2. Open up Paragon Partition Manager 11 Personal
3. Click on Partition Manager on the left tabs and launch the partition manager
4. At the bottom, click on Basic Hard Disk (HTC Android Phone USB Device)
5. Click on Format Partition in the Disk View tab.
The problem is when i click format partition. It just shows the hard disk in my PC but not the HTC Android phone USB Device.
I even tried skipping the format partition to try creating a partition but i still cannot see the HTC Android Phone USB Device.
The Error i get is "The disk already contains four primary partitions. Basic hard disks can contain only four primary partitions, including extended one.
Eh...
Why not just boot into Clockwork and use the Partition menu
spicyjoe said:
@haha123 the problem i'm facing is i cannot see the sd card when i click format partition... Maybe i'm doing it wrong. Here is how i do..
1. Plug my phone into USB and click Disk Drive
2. Open up Paragon Partition Manager 11 Personal
3. Click on Partition Manager on the left tabs and launch the partition manager
4. At the bottom, click on Basic Hard Disk (HTC Android Phone USB Device)
5. Click on Format Partition in the Disk View tab.
The problem is when i click format partition. It just shows the hard disk in my PC but not the HTC Android phone USB Device.
I even tried skipping the format partition to try creating a partition but i still cannot see the HTC Android Phone USB Device.
The Error i get is "The disk already contains four primary partitions. Basic hard disks can contain only four primary partitions, including extended one.
Click to expand...
Click to collapse
I followed this step by step guide:
http://forum.xda-developers.com/showthread.php?t=512873
I had the card formatted to fat32 (using windows) before partitioning, maybe you can try that?
pjgodd said:
Eh...
Why not just boot into Clockwork and use the Partition menu
Click to expand...
Click to collapse
Hmmm, i was looking around in that menu but there isn't any saying create partition... just format and stuff... :S
@haha123 Hmmm, give that a try.... i've just downloaded the gparted software so will try that first...
EDIT: Given up all hope, i can't even get gparted to boot with USB...
Check the GUIDE...
Thanks blayo, i tried that and it crashed all the apps on my phone until i had to format my sd card and restore nandroid... hmmm... mysterious, but thanks, i'll let data2ext pass.... wouldn't want to brick my phone...
spicyjoe said:
Thanks blayo, i tried that and it crashed all the apps on my phone until i had to format my sd card and restore nandroid... hmmm... mysterious, but thanks, i'll let data2ext pass.... wouldn't want to brick my phone...
Click to expand...
Click to collapse
Well, this is the formatting guide... what the hell did you expect? There are certain files on SD fat32 partition that some of apps use. If you unmount SD card and reformat it, those files are not available any more. Right?
Yeah true but even when i restore it doesn't work. Alright man, thanks for the guide anyways.
What does this notification really mean? I'm running CM7 off an 8G SanDisk. The /sdcard filesystem appears intact, it mounts properly on CM7 and Linux, but this notification won't go away.
fsck on Linux reports no problems.
Might something be confused about partitions? I can't mount /emmc for some reason, CWM can't mount it when I tell it to format it, and USB mode doesn't export it, although it looks like it's trying to; Linux reports a /dev/sde (along with /sdcard at /dev/sdd), but it can't be used:
Code:
# fsck /dev/sde
e2fsck: No medium found while trying to open /dev/sde
Any ideas?
Thanks!
Dennis
Fixed it!
To recap, I'm running CM7 from SD. I was getting a "Damaged SD Card" notification, and my /emmc vanished, and it wouldn't export via USB ("No media present" was the error reported by Linux, although /dev/sde was created), and CWM couldn't format it for me (why not?).
Both were apparently from the same cause. I repaired mmcblk0p8, and now my /emmc is back and the Damaged notification is gone.
So, if you're getting that notification, it may not be about your SD card!
Details: I couldn't use dd from Linux, but I could dd if=...blk0p8 within Terminal Emulator. My busybox doesn't have mkfs.vfat, so I used dd to copy /boot onto the partition; this gives it a (small but sane) filesystem. I rebooted to get /emmc mounted properly (check fstab.vold for the gory details), connected the cable to my Linux PC, checked that the expected contents were on /dev/sde, unmounted it (command line, not via GUI) and ran sudo mkfs.vfat -I -n MyNookColor /dev/sde from the Linux command line. All is now well.
i hv the same issue but since i'm a noob at nook color and i dont knw anything abt linux... i hv no clue what your are talking about...
it would be a gr8 help to me and others who are not well versed with linux, if you could tell me exactly what did u do to fix this problem.
please help me with this issue.
ty
sd
stavan_d said:
i hv the same issue but since i'm a noob at nook color and i dont knw anything abt linux... i hv no clue what your are talking about...
it would be a gr8 help to me and others who are not well versed with linux, if you could tell me exactly what did u do to fix this problem.
Click to expand...
Click to collapse
Android is just as much a Linux system as Ubuntu or Fedora.
This applies if and only if Settings/Storage claims that you have no /emmc or /mnt/emmc, and if you've installed CM7 to emmc. Read the headers carefully.
Start Terminal Emulator.
In this window, type su. The prompt changes to #.
Type df.
If there's a listing for /mnt/emmc or just /emmc, try something else; this isn't for you.
We're going to reconstruct /emmc by copying /boot onto it. THIS WILL ERASE /emmc!!!
Type VERY CAREFULLY:
dd if=/dev/block/mmcblk0p1 of=/dev/block/mmcblk0p8
That's blk zero pee one and blk zero pee eight.
This will grind away for quite some time.
When it's done, reboot.
If you still get the notification, you have some other problem.
You now have a tiny /emmc instead of the 5G partition that should be there. Plug the cable into your PC, enable USB mounting, and verify that one of the volumes looks like a boot partition. If you run a Linux PC, check the device name (mine was /dev/sde, yours is probably different), unmount it, and do the mkfs I showed before.
If you run Windoze, tell it you're done with the /boot drive (like you would do with a thumb drive), and format that device (E:, F:, whichever it was) by (IIRC) right-clicking on it in an Explorer window and selecting Format. Again, SELECTING THE WRONG DEVICE WILL SCREW YOU UP. I am not responsible.
If you're not sure about ANY of these steps, please get expert local help.
Good luck!
Sent from my NookColor using XDA Premium App
i m booting cm7 from the sd card... and settings/storage/additional storage/mnt/emmc Unavailable...
so how do i fix this...
also when i plug NC in boot OS it shows 2 partitions, 1.undefined and 2. 4.98gb... instead of 5gb single partition originally present...
Hello Everyone,
I've been trying to run either AOKP or CM10.1 but they seem to neet FAT32, and oh small wonder, my SD card is on exFAT atm.
Well since I do not have a card reader, and the phone cannot mount into UMS mode I was a bit stumped.
I then thought, why not Busybox this thing.
But fdisk fails me blatantly.
The result is
"fdisk: WARNING: rereading partition table failed, kernel still uses old table: Invalid argument"
Some googling got me to believe that I have to make an additional DOS partition, which did no good either.
Do any of you have an idea on how I could format to FAT32?
I am running stock, with root and TWRP as recovery
Cheers,
Linus
And I think I have found the answer. Somehow fdisk didn't want to play ball, but if I use mkfs it seems to work.
At leas after reboot it was mounted as vfat
I executed "mkfs.vfat /dev/block/vold/179:33" and am now copying my backup back onto the SD card
After that I'll install CM10 I think and will tell you all if it works or not
and yes
I am now running CM10.1 and it all works as it should
very nice
Thread closed for me