Phones DEAD - XPERIA X1 General

hi i dont know if anyone can help i reset my phone and started restoring from my memory card and it crashed so i took the battery out and waited for a bit and put it back in and turned it on ant it comes up with the sony logo then the xperia logo then just stays black and ive tried everything and nothing will work can anyone help??

Related

Unit keeps on freezing at start up

Any help is greatley appreciated. I just bought the xda2 a week ago and it worked fine until yesterday. At first the phone just wouldnt dial. Then it would freeez. After a soft reset, it wouldnt go past the first "o2" screen and would just hang. The blue light started flashing eventhough I never enabled Bluetooth. The system didnt start past that screen and it also wouldn't shut off. Even after a hard reset it still had the same symptoms(it froze at the bootup screen and had flashing blue light). Around 30 minutes later after trying to turn it on and off. I finally started. But then it happened again today. Thanx in advance
If it still displays these symptoms after a hard reset then it look like a hardware fault. Only other thing i can think of is if you have a memory card inserted that is upsetting the system.
It doesnt have a memory card. I was afraid it might be hardware related. Any idea on how to have it repaired from the US

frozen on bootloader screen

ok here's what's going on perhaps someone can figure out what's wrong. Last night I had placed my mda on its charger like usual b4 bed. well sonce my battery cover is slightly broken I had placed a some cardboard within the battery door due to the fact that it would "white screen" then rest and get stuck at the loading screen and drain my battery, anyhoo.... well it whitescreened cause my dresser rocked due to my cat stepping on my phone. so I reset it as usual and the splash screen would load then fade to white. after several attempts it finally started to load as usual but then it went to the boot loaderscreen. I had reset it several more times but no luck. I took out the mobo to see if something was stuck and again nope. luckly I had an older mobo that wouldent charge so I had replaced the mobo but does anyone know why it would randomly get stuck on the boot loader screen? I had even did a hard reset in the device and still no luck. if it was a normal computer I would say that it had lost it's OS any ideas on how to fix it so I can get back my phone the way it should be?
-rastlin
update on bootloader
well I was able to aquire tmobiles flasher utility and I attemted to flash the unit to no luck. I went through all the steps and it gave me an error that it cannot retreive data from the device. ok now I am totally stumped. I am open to any and all suggestions
-rastlin

Loop at android boot tmo my touch

Hey is any one having trouble with their my touch from us. I power mine down then power up and it gets past the green my touch then gets stuck on android boot. Its ridiculous!! Just got it and it has some problem. I have had to hard reset 3 time already to at least use it.
Sounds like a defect man call customer care and get a new one! or ask if you can get it replaced at a T-mobile store that way no down time!
Oh snap man you know what I was actually about to post a thread with this same issue. Ive had mine for about 2 months now and never had a problem with it until today. I was using telenav and the market and listening to music when it froze up on me then I removed he battery then put it back in and it got stuck on the Android logo. It would have the animation of it starting but then after about 3-4 animations of the light on the Android logo it would freeze for about 5-10 secs then start the animation all over again left it like that for about 5 mins and it kept doing the same thing. So I decided to remove both my sd cad and sim card and still had the same issue. Then i decided to do a wipe and see if that help which I only did one wipe and it started working again not sure about your 3 times but mine started working after the first. But what were you doing when it froze? I just installed the NANO Theme For AHOME from MAPPN then as soon as it installed BAM!! IT FROZE!!

Issues boot issues

My HTC surround died this summer and i have decided to try to fix it. I have tried replacing the SD card, leaving the battery out, reflashing it, factory resetting it and non of this has worked. My phone wont turn on unless you plug it in. It gets to the White HTC screen and then shuts off and restarts. Under the tricolor screen it shows SD UNKNOWN 27, im not sure what that means. Could someone throw me a bone to how to fix this? thanks
try one more other sdcard and after resetting plus the phone as soon a u reset . still if aint workin there probably theres a problem with the sdcard slot
aarrun said:
try one more other sdcard and after resetting plus the phone as soon a u reset . still if aint workin there probably theres a problem with the sdcard slot
Click to expand...
Click to collapse
I have tried two other SD cards. I think it could possibly have a battery issue too though. Right before it completely quit working my battery wasnt lasting for more then an hour. Sometimes i had it plugged in and it was dieing faster then it was charging. It also started to get very hot and then it would shut off. I used to be able to power it up to just past the HTC screen without it being plugged in but now i cant make it past the HTC screen with it plugged in. Any thoughts?
Thanks
Also when I check the CRC I get two codes
BL CRC-oxA4CA6CC6
OS(SI) CRC-0x1932A82C
Can anyone shed some light on what this means? Thanks

Need help. Focus stuck on Splash screen for hours

Hello I have a Samsung Focus Rev. 1.3 branded AT&T I'm trying to get working again. The battery was dead and it wouldn't come on. I finally got it to take a charge but all it would do was show the Samsung screen. I am an Android guy and this is the first Windows phone I have worked with. I started reading the forums and installed Magldr with no problems. I have an x64 PC and finally found all the correct drivers for this phone. I have tried installing the factory AT&T UCJK2 Firmware but the phone never gets off of the Samsung logo. The Rogers ROM does the same thing. I tried the Clean ROM V1.3,3.05 and 3.10 with similiar results. The installs go smoothly with no errors and I clear the storage afterwards like it instructs. I have tried most of the ROMS in this forum for 1.3 and either the screen blinks or stays stuck on Samsung. The only one that has worked is the is the Dynamics 2.2 and it took 4-5 hours to get to the blue Windows Phone screen. It stays like this for hours. It started one time with the clock screen but when you slide it up there is nothing behind it but a black screen with a battery icon at the top and no a no sim icon. I think the phone must have a hardware fault but maybe there is something I'm missing that it needs. Any help would be greatly appreciated.

Categories

Resources