ESP:
recientemente instale el "SRS wow HD" y funciona bien reiniciando el celular, pero al apagarlo y volverlo a prender ya no se escucha ningun sonido salvo el audio de las llamadas agradeceria si alguien supiera si hay algun parche o alguna cosa para hacerlo funcionar bien
ING:
recently installed the "SRS WOW HD" and it works fine but when rebooting, then switch off and turn on again and no sound is heard except the audio of the calls would appreciate it if someone knew if there is a patch or something to make it work well
it happens only if u close the media player while the music is playing SO before closing the media player either pause or stop playing or use s2p for listning music.
pasa inclusive si despues de que se inicia (despues de un softreset ) se suspende (apaga la pantalla) despues al intentar prenderlo no hay sonido en nada ni en S2P
even if it happens after you start (after a softreset) is suspended (off screen) then try to understand there is no sound at all or S2P
tnks
Hi,
actually I'm experiencing the same thing as you.
After installed, the sound was just run fine.
But when BA suspend itself, and then when I try to wake it up, no sound is created.
any idea?
Hi,
until the problem to be resolved, for you guys who doesnt want the BA to be no-sound-at-all,
just change in the registry the Dll back to your original Dll (mine is Wavedev.dll) HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Wave Dev, on Dll key -> change back to Wavedev.dll
Related
Hello, I have installed ROM 4.03.02.5 ESN. We could fix that, as in the original WM6, when there is a notification of missed call or arrival of message and is put into sleep the upper right point blinking orange and not green. It's that I find useful, as well, with a glance and turn it on without, you know if there is a notification.
Sorry, but my English is very bad
Hola, tengo instalada la ROM 4.03.02.5 ESN. Se podria arreglar que , tal y como en el WM6 original, cuando hay una notificacion de llamada perdida o llegada de mensaje y se pone en modo reposo el led superior derecho parpadee en color naranja y no en color verde. Es que lo encuentro útil, ya que así, con un simple vistazo y sin encenderlo, sabes si hay una notificación.
blasepi said:
Hello, I have installed ROM 4.03.02.5 ESN. We could fix that, as in the original WM6, when there is a notification of missed call or arrival of message and is put into sleep the upper right point blinking orange and not green. It's that I find useful, as well, with a glance and turn it on without, you know if there is a notification.
Sorry, but my English is very bad
Hola, tengo instalada la ROM 4.03.02.5 ESN. Se podria arreglar que , tal y como en el WM6 original, cuando hay una notificacion de llamada perdida o llegada de mensaje y se pone en modo reposo el led superior derecho parpadee en color naranja y no en color verde. Es que lo encuentro útil, ya que así, con un simple vistazo y sin encenderlo, sabes si hay una notificación.
Click to expand...
Click to collapse
there is programme called Spb Pocket Tips & Tricks i think with this one you can add/remove notification types try it -even the trail version will do i think
http://www.spbsoftwarehouse.com/products/downloads.html?en
its something to do with the registry but i am note sure of the values and keys
Did you want the notification of a missed call to flash green or orange? IIRC it flashes Orange when you have a missed call IF you set this in Notifications in the control panel!?
Elwyn M3100 said:
Did you want the notification of a missed call to flash green or orange? IIRC it flashes Orange when you have a missed call IF you set this in Notifications in the control panel!?
Click to expand...
Click to collapse
Thank you, unknown this option.
It already works that way!
Hello blasepi!
First of all, I'm gonna introduce myself to you, cause I come from the same forum than you, my nick is "shark" there. Well, I'm working with the same ROM version than you, 4.03.02.5 ESN, and when I have a missed phone call or SMS, my led blinks orange, but It doesn't do it forever, what I mean is that It starts blinking orange, and keeps that way for some time (can't tell you how much, since I haven't measured it yet), and then, after that period of "long" time, it blinks green again, so, if you've got a missed call, and you haven't had a look at the led for some time, that period of time may have expired and It'll be blinking green again. What we can do is ask EPL in the other forum how we can vary that period of X minutes so that we don't have to be looking at the led so often.
I hope you'll understand everything, anyway I'll write it in Spanish as well:
Hola blasepi!
Lo primero de todo, me voy a presentar, ya que vengo del mismo foro que tú, mi nombre allí es "shark". Bueno, yo llevo la misma version de ROM que tú, la 4.03.02.5 ESN, y cuando tengo alguna llamada perdida o algún mensaje, mi led parpadea naraja, y se mantiene así durate un tiempo (no te puedo decir cuánto, ya que nunca lo he medido), y luego, después de ese periodo largo de tiempo, parpadea verde de nuevo, entonces, si tienes alguna llamada perdida y no has mirado al led durante un tiempo, ese periodo de tiempo se puede haber pasado y estará parpadeando en verde otra vez. Lo que podemos hacer es preguntarle a EPL en el otro foro, cómo podemos variar ese peiodo de x minutos, de tal forma que no tengamos que star mirando al led tan a menudo.
Un saludo!
If you go to Start | Settings then at the bottom of the screen is "Sounds and Notifications". In there, if you select the "Notifications" tab at the bottom of the screen you can change the way your phone notifies you about events.
For example.
Missed Call:
Flash light for 15 minutes
Display Message on Screen
Vibrate
These options on mine are checked. And yours?
That's it, Elwyn M3100!
That's it, Elwyn M3100!
I had never seen that before, but those are my factory settings in ROM 4.03.02.5 ESN, which is the same than blasepi's.
Blasepi, entra en Inicio/Configuración/Notificaciones/Evento, y ahí seleccionas "Teléfono:Llamada perdida"; Yo tengo marcado "Luz interm. durante 15 min", y eso es todo.
Thank u!
Greetings.
I have an issue with my cooked rom. to spend time in sleep mode when I give the select button, the phone does not work, nor receive calls. when I give the end button I get a message on the screen saying that the backlight mode and press the button to turn on. but more that I do nothing. and the battery did not last long.
Thanks for your help and support.
Saludos,.
Tengo un Problema con mi rom cocinada. al pasar un rato en modo de suspensión cuando le doy al boton de activar, el phone no se activa, y tampoco recibe llamadas. cuando le doy al boton de end me sale un mensaje en la pantalla diciendo que esta en modo de backlight y presione el boton para turn on. pero por mas que le doy no hace nada.
Gracias por su ayuda y soporte.
HTC RhodiumW
Kitnchen: OSBuilder
SYS 23563 0c0a
Edit: Was some rgu files
Thread name changed to solved.
hi there, here's the deal, I'm from Mexico, so, I'll try to explain myself the best way posible in english, and then, put it in spanish, so if something is not well explained, can check in spanich and figure it out, or whatever, jejeje, so here I go
I got the e900h, and, in a particular party, the cel fell to the floor, and the screen got broke, real real broke, but, the touch and all the feature of my cellphone keep working in perfect way, so, the cell was ok, aparently (besides the screen broke) si it went that way for aprox 4 days, and suddenly the device restarted and, it got frozen on the LG screen, and I can't make it work again, always the same screen, and didn't go on from there, in 3 ocassions it go forward, put the other screens, and get to work, like nothing happens, but it only work for like 1-2 mins, and then restart again and stays on the LG screen, I already install the original ROM, so it has the very fist windows phone OS (windows 7) so I don't really know what would it be, I mean, I flashed the cell past friday, it all went great, and get freeze on the same screen (LG) so I let the device at the ofice and let the weekend pass, and today started again, and it work, like brand new, I started to put the first setting, hopping it didnt restart, but, like the other days, it restart, and stay on the LG screen, so, o don't think it is something on the OS, can somebady help me?? would it be a glass/touch system problem) any ideas?? hope someone can help me, so I can keep using the cell, and repair the screen, or just dump it and get a new one, hope somebody can help me, or at least, give me an answer, thank you!!!
ahora en español, por si alguien lo entiende y quiere ayudar, jejeje, a ver, ahi va
en resumen, el cel se me cayo y la pantalla (el cristal) valio gorro, esta rajado bien duro PERO, el touch esta al 100, y el cel funcionaba al 100, como por 4 dias, pero de repente se reinicio solo y ya se quedo trabado en la pantalla de LG (que es la primera q aparece cuando lo prendes) ya lo eh prendido y apagado mil veces pero nada, siempre lo mismo, a excepcion de dos o tres veces, en las cuales prendio como si nada, y funciono al 100, pero ps, al minuto o dos, se volvio a reiniciar y se quede de vuelta en la pantalla de encendido, pensando que seria un problema con el OS, que se hubiera ciclado o algo asi, ps le reinstale el ROM original (windows 7), pero ps nada, sigue trabado en la pantalla de encendido. Se que se instalo bien el ROM, y q no es un problema de OS pq ahora prendio, y todo bien, empezo con la configuracion del cel y todo el show, como si fuera la primera vez q lo usas, pero, de vuelta, se reinicio, y se quedo en la pantalla de LG (pantalla de encendido) asi q, espero que alguien pueda ayudar, o sepa mas o menos q podria ser, gracias!!!!!
Saludos desde Hermosillo Sonora Mexico, y, en vdd espero que alguien pueda ayudarme, si no, ps, ni pex, a mandar por un tubo al cel, y a buscar otro, pero ps, si quisiera hacer q funcione, pq la neta me gusta mucho el cel, bueno, el OS mas q nada, jejeje, ahora si, ahi va la pregunta, y espero tenga respuesta, jajajaja, GRACIAS!!!!!!!!!!
OTHER PERSPECTIVE OF THE ISSUE!!!
Forget about the screen and tha fact that the cel fall, just focuse on the issue of the LG screen that don't move, and the fact that sometimes, it go well, but 1 minute after, it reset and stays on the LG damn screen, it just happen once again, and it's already flashed, with the original ROM, and the instalation went well....
Please!! somebody!!!!!!!!!!!!
...bye new one ,you wil get over it faster its only money...
djuricn said:
...bye new one ,you wil get over it faster its only money...
Click to expand...
Click to collapse
actually that's what I'll do, it's just for knowledge because I'll get another windows phone, htc surround
•[EN]
Hi, I have a Galaxy S5 MINI (SM-G800H) and I'm asking for help here because no one could help me in the forum of this mobile.
The problem I have is this: an official ROM upgrade to 5.1.1, the phone worked fine until you install BAREBONE CLEAN and it includes audio mod. after a time he began to throw error "DPS + stood still." consistent message that left not use the phone.
Then from the recovery I began to erase everything that had no name "audio" "DPS" etc. and my phone went dead sound.
after that players did not work, call, youtube, nothing to reproduce video, even the boot screen.
Try installing the official ROM, PIT files, but nothing happened.
use the phone so a month, and yesterday did bootloop phone 10 or 15 times, and then I start showing the headset icon and everything worked normally, until you reboot again and returned to the same.
Really I need help is my last resort to ask questions, but you see me here.
when a ROM installed, it replaces all files that can be viewed from the recovery? if you do not like I can reinstall files in the folder
"System"
"Sys" ..... etc?
sorry for my English.
•[ES]
Hola, poseo un Galaxy S5 MINI (SM-G800H) y estoy solicitando ayuda aquí porque nadie pudo ayudarme en el foro de este móvil.
El problema que tengo es el siguiente: actualice a una ROM oficial 5.1.1, el telefono funcionaba bien hasta que instale BAREBONE CLEAN y mod audio que éste incluye. luego de una tiempo comenzó a tirar error "DPS+ se detuvo". mensaje constante que no dejaba utilizar el teléfono.
Entonces desde la recovery comencé a borrar todo lo que tenia nombre "audio" "DPS" etc. y mi telefono se quedo sin sonido.
después de esto no funcionaba reproductores, llamadas, youtube, nada que reprodujera video, ni siquiera la pantalla de boot.
Trate instalando la ROM oficial, archivos PIT, pero nada sucedió.
utilice el teléfono así un mes, y ayer el teléfono hizo bootloop entre 10 o 15 veces, y entonces arranco mostrando el icono de auriculares y todo funcionaba con normalidad, hasta que se reinicio nuevamente y volvio a lo mismo.
Necesito ayuda de verdad, es mi último recurso hacer preguntas, pero ya me ven aquí.
cuando se instala una rom, reemplaza todos los archivos que se pueden ver desde el recovery? si no lo hace como puedo volver a instalar archivos de la carpeta
"system"
"sys" ..... etc?
disculpas por mi inglés.
Two Things: Have you tried putting an Earphone to see if the output sound is working?
And have you tried getting it to an manufacture maintenance to replace the loudspeaker or the sound circuit?
maybe these have burned when you flashed.
•[ES] Hola, el sonido no esta saliendo por auriculares. Y antes de llevar a un servicio técnico quisiera quitar las dudas de que fuera software.
Una pregunta, un problema de hardware puede hacer que las aplicaciones dejen de funcionar? Los reproductores, llamadas, etc?
•[EN] Hello, the sound is not coming out headphones. And before taking a service would remove the doubt that outside software.
A question, a hardware problem can cause applications to stop working? Players, calls, etc?
Yes, if you have an hardware problem, you can't listen to call neither musics.
that is, hardware problem = "Soundboard". which is the case here.
DBlackFireD said:
Yes, if you have an hardware problem, you can't listen to call neither musics.
that is, hardware problem = "Soundboard". which is the case here.
Click to expand...
Click to collapse
•[ES] Perfecto. Muchas gracias por las respuesta. Iré a un servicio técnico a probar el hardware :good:
•[EN] Perfect. Thank you very much for the answer. I will go to a technical service to test the hardware :good:
rodrycapo07 said:
•[ES] Perfecto. Muchas gracias por las respuesta. Iré a un servicio técnico a probar el hardware :good:
•[EN] Perfect. Thank you very much for the answer. I will go to a technical service to test the hardware :good:
Click to expand...
Click to collapse
Buenas tardes, tengo problemas con el sonido del hablante no le oigo y el ami si, alguna solución MM 6.0.1
Enviado desde N910F Tapatalk Movil
---------- Post added at 06:23 PM ---------- Previous post was at 06:19 PM ----------
joscopa said:
Buenas tardes, tengo problemas con el sonido del hablante no le oigo y el ami si, alguna solución MM 6.0.1 GRACIAS
Enviado desde N910F Tapatalk Movil
Click to expand...
Click to collapse
Enviado desde N910F Tapatalk Movil
Hello friends, after doing a lot of research and reading in these forums about tasker to start the applications after a light sleep or fast boot. He found that with the Agama Car Launcher and Macrodroid, we can automate just like with tasker. That when the radio starts, the applications or commands that we want are executed.
I will explain step by step:
The agama has an option to auto run an application with a delay when starting the launcher, from there we will get everything...
1st. We need to tell the launcher not to run the macrodroid app.
2nd. In macrodroid we must create a macro with the following order.
Macro - Launch Apps
*Trigger: Application executed - Macrodroid
*Actions:
Music/media volume change = 25%
Speak text: "I use it to welcome me" xD
wait 5ms
Launch APK: in this case I use an external equalizer since my radio does not have a dsp.
wait 5 seconds
Launch Deezer
wait 3 seconds
Music/multimedia volume change =15%
Media Play: Simulate media button (Deezer)
This way, when you turn on the radio and finish running the launcher. Automatically I am welcomed, the equalizer is launched and then the deezer and starts playing. Saving me from doing everything manually.
When activating this macro, if we tried to enter macrodroid to modify a macro or create a new one, the initial macro would auto-execute and we would enter a loop without the possibility of deactivating it or entering macrodroid to modify it... For that I have created another macro that deactivates it and lets us enter macrodroid without problems.
Macro - Canceled macro startup apps
*Trigger: Bluetooth disabled
*Actions: Disable Macrodroid
I hope that I can be of help to you and if you have any questions, ask me, I am willing to help in any way possible.
Kind regards Bentacayse.
Hola amigos, después de investigar mucho y leer en estos foros lo relacionado con tasker para iniciar las aplicaciones después de un sueño ligero o un arranque rápido. Descubrió que con el Agama Car Launcher y Macrodroid, podemos automatizar al igual que con tasker. Que al iniciar la radio se ejecutan las aplicaciones o comandos que nosotros queramos.
Paso a explicar paso por paso:
El agama tiene una opción de auto ejecutar una aplicación con retardo al iniciar el launcher, de ahí sacaremos todo...
1º. Debemos decirle al lanzador que no ejecuta la aplicación macrodroid.
2º. En macrodroid debemos crear una macro con el siguiente orden.
Macro - Inicio de aplicaciones
*Disparador: Aplicación ejecutada - Macrodroid
*Acciones:
Cambio de volumen musica/multimedia = 25%
Hablar texto: "lo utilizo para darme la bienvenida" xD
Esperar 5ms
Lanzar APK: en este caso utilizo un ecualizador externo ya que mi radio no tiene dsp.
Espere 5 segundos
Lanzar Deezer
Espere 3 segundos
Cambio de volumen musica/multimedia =15%
Multimedia Reproducir: Simular botón multimedia (Deezer)
De esta manera, cuando encienda la radio y termine de ejecutarse el lanzador. Automáticamente se me da la bienvenida, se ejecuta el ecualizador y seguidamente el deezer y empieza a reproducirse. Ahorrándome estar haciéndolo todo yo manualmente.
Al activar esta macro, si intentáramos entrar a macrodroid a modificar una macro o crear uno nuevo, se auto ejecutaría la macro inicial y nos entraría en bucle sin posibilidad de desactivarlo o entrar a macrodroid a modificarlo... Para eso he creado otra macro que lo desactiva y nos deja entrar a macrodroid sin problemas.
Macro - Cancelado de macro inicio apps
*Disparador: Bluetooth deshabilitado
*Acciones: Deshabilitar Macrodroid
Espero que les pueda servir de ayuda y cualquier duda que tengan, pregunten que estoy dispuesto a ayudar en todo lo posible.
Un saludo Bentacayse.