Bad rear speaker - G1 General

Ok so i bought my girlfriend a G1 off of Ebay. I got it at a great price for being in mint condition and only slightly used. BUT the rear speaker isnt working at all. No ringer. No speaker phone. No music. Nothing. I tried everything. Factory reset and checked all settings. I have also searched for a few days around the net and I havent found anyone with a similar problem that was able to fix it.
I really would prefer to try everything before I crack it open and clean the contacts as the service manual sugests.
Any help here would be great. Thanks

Related

Damaging speaker of XDA II is as easy as 123? true or false?

Well i think its true. why? read on!
I bought my XDA II a few weeks ago. Its a love & hate machine & i won't get into that. But i think i have damaged the speaker .. as in i can notice sound getting distorted at times. It probably happened when i played this audio file at full volume .. which was actually for less than 2 seconds!! Ever since then, i can tell how the sound from the speaker comes out distorted. Same exact thing happened with my brother, where he played some song at full volume & it apperntly blew his speaker. I've soft reseted the machine multiple times (who doesn't!) ever since but no hard reset yet.
Although my question is .. is it really _that_ easy to blow the speaker?! The device should either have a speaker that can handle the amplification it is being providing, or not amplify the sound to levels the speaker can't handle. Blowing your speaker away on the first attempt to play something loud seems awfully lousy to me from a machine's design point of view.
Has anyone else experienced such problem or know of some remedy? I don't want to open the machine up & get the speaker repaired. Would really appreciate any help on the matter.
Thank you all.
Hi m8. Don't know if you've tried this but I had a problem a while ago where I could not hear any sound at all. I could make a phone call and ther person on the other end could hear me fine but I could not hear anything. I found the way to make it work again would be to squeeze the thing at the top near the earpiece (as if it was a loose connection).
Like I said, don't know if you've tried this but it worked for me. Have you got warranty?
Hey Camel, i have had my sx56(wallaby) all the way apart, and the only thing attatching the mainboard to the speaker are two little spring-loaded contacts, perhaps try tightening the screws on the back of your device (if it's anything like mine), this should make the connection between your speaker and mainboard more secure.
Tim
speaker
hey mate,
yep same thing with mine. now anything above about 50% in a phone call and it's all distorted.
pretty annoying, i've just got to get around to opening it up and checking the speaker contacts/replacing speaker with a spare.
will post results.

Rear speaker - where can I get one

The rear speaker of my JAMin blew... I need a replacement so I can do the work myself and not have to send it over for a week to the lab. Where can I get one?
Thanks,
Nir
How to repair the sound issue on Prophet
Hi
I could read a lot of posts on that issue and found this solution:
Remove the battery cover. Then the camera cover: to do so, lift up the gently the cover starting from the side of the battery.
You will see something looking like a fan. This is the speaker. the problem is with the red wire whixh connect the speaker.
Turn on your prophet and run your favourite MP3 song.
then touch the red wire with your stylus. The sound should come back. Insert a piece of folded paper to keep the cable properly fixed. that's all
Watch out not to wish to fix it too nicely, you could damage the wire !
Hope this help, otherwise a return to the service department will be necessary !
Hope this helps
Regards
Régis
Hay the paper trick works!
I went here to learn how to remove the flap to the speakers:
http://www.modaco.com/index.php?showtopic=240109
Well, my speaker had the voice coil broken... touching the membrane would bring it back to life but that is no real solution. I replaced it with a speaker from a used old cellphone with some minor use of hot glue to fix it in place and seal around it.
It works now just as new.
Nir
yeah it is a real Problem.
mine is broken twice in 6 months.
tried the paper thing. but it sometimes sounds weird and there's some hissing. maybe I did it wrong. so I tweak it a bit and just lost it completely. no sound whatsoever now.
went to the service center today. they said that they have a new batch of speaker which supposed to be better than the previous one. if anyone can confirm.
rlou77 said:
Hi
I could read a lot of posts on that issue and found this solution:
Remove the battery cover. Then the camera cover: to do so, lift up the gently the cover starting from the side of the battery.
You will see something looking like a fan. This is the speaker. the problem is with the red wire whixh connect the speaker.
Turn on your prophet and run your favourite MP3 song.
then touch the red wire with your stylus. The sound should come back. Insert a piece of folded paper to keep the cable properly fixed. that's all
Watch out not to wish to fix it too nicely, you could damage the wire !
Hope this help, otherwise a return to the service department will be necessary !
Hope this helps
Regards
Régis
Click to expand...
Click to collapse
That's great, this fixed my problem. After I touch the red wire with my stylus, the speaker just works fine, don't even need a folder paper.
starrayfly said:
That's great, this fixed my problem. After I touch the red wire with my stylus, the speaker just works fine, don't even need a folder paper.
Click to expand...
Click to collapse
I'll try this one myself - my speaker just died again - it's been back once already.
Well, I followed the instructions above and now I have a working speaker again. A very low tech fix to a high tech device.
I have found a small bit of sponge does the job better than folded paper.
what is the type of speaker.
i mean can i use any speaker?
what's the best?
Mohammad, you seem to have missed the point of the replies in this thread. We don't know where to get another speaker from but we do know how to make the existing one work again.
oh, dude!!!
sorry
What a piece of ugly Speaker: O2 xda Neo!
Hay Guys,
I am suffering from this nasty problem since sometime. My brother has tweaked the speakers with a metal piece seem to work. However if I use speakerphone, it goes off.
Is there a permanent solution to this constant spurce of unhappiness.
Incidently I have been blessed with a on & off camera problem as well. I think I will never buy a DOPOD product in my life again.
My Camera has those colour matrix instead of proper images. Occasionally it behaves normally. I have tried hard reset already.
Any body? help !!!!!
Ugly Speakers: O2 xda Neo
Hay Guys,
I am suffering from this nasty problem since sometime. My brother has tweaked the speakers with a metal piece seem to work. However if I use speakerphone, it goes off.
Is there a permanent solution to this constant spurce of unhappiness.
Incidently I have been blessed with a on & off camera problem as well. I think I will never buy a DOPOD product in my life again.
My Camera has those colour matrix instead of proper images. Occasionally it behaves normally. I have tried hard reset already.
Any body? help !!!!!
I tried this....when i touched the red wire i got the sound back i was happy.. but not for long cause touching the wire now doesn't help anymore so i have to send it back
drdeepak said:
Hay Guys,
I am suffering from this nasty problem since sometime. My brother has tweaked the speakers with a metal piece seem to work. However if I use speakerphone, it goes off.
Is there a permanent solution to this constant spurce of unhappiness.
Incidently I have been blessed with a on & off camera problem as well. I think I will never buy a DOPOD product in my life again.
My Camera has those colour matrix instead of proper images. Occasionally it behaves normally. I have tried hard reset already.
Any body? help !!!!!
Click to expand...
Click to collapse
I wedged in a piece of foam. That's worked a treat.
The manufaturing quality of HTC is bad
I also have the speaker problem. And thanks for all of you to suggest that sponge and folder trick. I did it and i have put a small slice of ear plug sponge. For past 2 days my spearker is working. But dont know how long will this sponge give my speaker lifesupport. I am sure after few days again its going to be problem. Hey,...... is there anyone in this thread who has used sponge/paper and the speaker is working for long time.. at least a year ?.
These HTC products seem really bad quality products.
that worked
http://www.4shared.com/file/6894706/ca35cee6/altavoz_s200.html
motorola l7 speaker is too a candidate
It's too bad they saved on the speaker. Guess the manufacturer of the speaker had a very nice presentation @ HTC
Trying to download that pdf file, but it's not working :/ However I've read on other occasions that people talk about that motorola speaker as a replacement. Might be worth giving a more detailed look into that.
What exactly is the problem with the speaker btw? Did anyone narrowed that down already? Why is the speaker not functioning properly?
pdf
The file contains instructions to change the original speaker using the spk of a motorola v525.
I did it yesterday, and works fine, but isn´t easy to do it

Ear Speaker

To make it quick. I bought a new OEM housing off of ebay for my wizard (cing. 8125)
I changed the housing and now the ear speaker doesnt work at all. I took it back apart to make sure it was making the connection. Im sure it is, and now I have a useless PHONE! Damn!
Me too
I am having the same problem but, mine happened when i got it. When i bought the wizard, my speaker didn't work. And on ebay all the phones on there for parts all have the same problem as me or i don't want to spend that much.

Rear Speaker Problem (solved)

I recently had a problem with my rear speaker. One day it just stopped working It worked fine with headphones plugged in and I could hear sound while on the phone (but not in speaker mode). I could only play music while using headphones and came to the conclusion I had a rear speaker problem. I tried a hard reset but with no luck.
I then decided to take the phone apart and found the two contacts on the speaker needed to be bent to regain contact. I figured I'd post this up just incase someone else has my luck Using the Blackstone Service manual posted online, disassembly was pretty straightforward. I didn't have the torx bit they require but was able to use a small straight slot without damaging the screws.
weren't you better off sending it to HTC and not voiding your warranty?
Thanks for posting a solution to you rear speakers I too have the same problem. Before I unscrew the HD can you advise weather there is any "seal" that the HD detects to show the HD has been tampered with?

No sound from loudspeaker, maybe hardware problem

Hello guys! My loudspeaker suddenly stopped working few weeks ago. I know the cause, and I am pretty sure it is hardware related.
Here is the story:
I installed this ROM (don't think it's important). It worked fine for about a month. The sound volume was lower than MoKee or MIUI, so I started searching for some solution.
I followed a guide similar to this to boost volume, and it worked!
Although I read in the post to not set the value over 95 (to avoid damaging speakers), I decided anyway to set it to 100, because I didn't think that could happen. Sound was very loud, and I was very happy.
Next morning, alarm screamed very strong, but suddenly stopped ringing. I realized my mistake, loudspeaker is completely mute since then.
Earpiece, headphones, microphones work, everything works except loudspeaker.
I hoped so much that was software. I formatted and installed some other ROMs (MoKee, MIUI, CM12) but still no sound. Then I restored a previous MoKee backup (taken when sound worked) but no success. Unfortunately it's a hardware thing.
I bought a new loudspeaker, learnt from YouTube how to open the Note, and replaced it. Still no sound.
Then I tested both loudspeakers (the original and the one I bought) and they both emit sound when attached to an external source (jack plugged to mp3 player). So the problem is not in the loudspeaker itself!
My knowledge ends here.
How can sound stop working by simply raising a software value? But above all, how can the loudspeaker work correctly, but not when placed into the phone? Is there another component that can be damaged in abovementioned way? If so, can that component be replaced?
I hope somebody could share some knowledge to help me solve the problem, or at least point to the right direction. Thanks in advance.
Open your Phone and look if something "looks" broken and make a picture for analysing. It can be not anything but more that just one piece that's broken.
(Sry for bad English, I'm from Germany)
OverBit said:
Open your Phone and look if something "looks" broken and make a picture for analysing. It can be not anything but more that just one piece that's broken.
Click to expand...
Click to collapse
I opened it many times today, but discovered nothing wrong or weird, although I'm not an expert so maybe I simply haven't noticed.
Will post picture as soon as I manage to take photo without phone
Yeah, its like taking a selfie with your phone on your phone without mirrors, only Chuck Norris can do that
(sry for bad English, I'm from Germany)
Some photos
I resurrected my old phone and took some photos. As I said, there's apparently nothing weird, nothing that appears burned or cut.
Here three photos (full phone, upper part, lower part) the loudspeaker contacts are highlighted.
I don't expect a hint on how to fix that (although I hope so much ) because I know this forum is meant for developers/modders/those working with software. My real question is:
Why after just altering value in mixer_paths.xml my phone is now mute? Can someone describe how the sound goes from the CPU to the loudspeaker? Is there something I can do?
udda90 said:
I resurrected my old phone and took some photos. As I said, there's apparently nothing weird, nothing that appears burned or cut.
Here three photos (full phone, upper part, lower part) the loudspeaker contacts are highlighted.
I don't expect a hint on how to fix that (although I hope so much ) because I know this forum is meant for developers/modders/those working with software. My real question is:
Why after just altering value in mixer_paths.xml my phone is now mute? Can someone describe how the sound goes from the CPU to the loudspeaker? Is there something I can do?
Click to expand...
Click to collapse
I did the exact same thing. I replaced the loudspeaker just like you. My sound still doesn't work. I have done a complete factory reset and tried new roms and nothing works.
tripper22 said:
I did the exact same thing. I replaced the loudspeaker just like you. My sound still doesn't work. I have done a complete factory reset and tried new roms and nothing works.
Click to expand...
Click to collapse
My friend device redmi note 3g got same problem.. tired change with new rom.. new speaker..and factory reset that all not work..so open the case..and discovered .the problem came from cpu/chip . coz mtk chipset camera n sound came from cpu..
Hi Guys
I have exactly the same problem with my Xiaomi Mi3. After display replacement lound speaker stopped working. While I had broken display (just the touch screen, dispay was fine) loudspeaker worked fine (I cannot switch off alarm, even shut down the phone)
I bought new speaker, but sound still doesn't work. Do you think that it is comming from CPU? It is possible but I don't think so, because everything works fine via earphones or bluetooth speaker.
Did you find any solution?
tripper22 said:
I did the exact same thing. I replaced the loudspeaker just like you. My sound still doesn't work. I have done a complete factory reset and tried new roms and nothing works.
Click to expand...
Click to collapse
nokovica said:
Hi Guys
I have exactly the same problem with my Xiaomi Mi3. After display replacement lound speaker stopped working. While I had broken display (just the touch screen, dispay was fine) loudspeaker worked fine (I cannot switch off alarm, even shut down the phone)
I bought new speaker, but sound still doesn't work. Do you think that it is comming from CPU? It is possible but I don't think so, because everything works fine via earphones or bluetooth speaker.
Did you find any solution?
Click to expand...
Click to collapse
I tried many other ways, none of them worked. I ended up buying a small BT speaker and carrying always with me.
In my case I learned in the worst way that excessive software amplification can burn audio chip. I replaced EVERY replaceable part (speaker, USB/speaker lower board, main ribbon cable, maybe others I don't remember) with no success.
@tripper22 I think you have no options. If you did my same steps, sadly your sound is lost. I have not yet replaced my phone only because there was a recent increase in development, and many custom ROMs to flash, but I will probably change that phone sooner or later.
@nokovica My sound from earphones or bluetooth is working too. I remembre reading that the audio amplifier is in a separate chip.
Anyway, your problem looks like a HARDWARE issue, since you didn't played with system configuiration. This is easier to fix (if it's fixable, of course).
If you did the replacement, you could check twice if some ribbon cable went damaged. You could try turning on your phone while open (remove back panel and expose board and cables) and see if works this way. You could check with a multimeter wether some signal (albeit small) come to the buzzer. In my case I discovered that a little signal (2-5 mV peak) reached the buzzer, but wasn't enough to make a sound. Rechecking after some months revealed that even that little signal is now gone (maybe sound chip damaged further).
If someone else did the replacement (hopefully Xiaomi assistance) it's their fault, and you can usually ask for repair for free.
Mi3 Loud Speaker Problem
@nokovica
Even I am facing the same problem with my Mi3 . After screen replacement ( touch + digitizer ) My loud speaker is not working , however phone speakar and mic is working perfectly fine , even the headphones too. I also detected one of the problem with Network Signals , if last for only few seconds and then it goes off , i tried placing many sims, but no luck . Can any one in the forum provide some solution to the Network Signals ?
even I have the same problem with my redmi note 3. I just opened back case, sub-board loudspeaker and re-assembled it. I didn't touch motherboard or any flex on upper side. Loudspeaker stopped working since then. Swapped with new part but it still doesn't work. Headphones and ear piece works fine. doesn't play music on bluetooth but hands-free works on bluetooth. how could have damaged audio chip on motherboard?? I barely touch it. didn't even unscrew it.
ilyasabdul said:
even I have the same problem with my redmi note 3. I just opened back case, sub-board loudspeaker and re-assembled it. I didn't touch motherboard or any flex on upper side. Loudspeaker stopped working since then. Swapped with new part but it still doesn't work. Headphones and ear piece works fine. doesn't play music on bluetooth but hands-free works on bluetooth. how could have damaged audio chip on motherboard?? I barely touch it. didn't even unscrew it.
Click to expand...
Click to collapse
Did you solve? I have exactly the same problem
I have faced with no audio (at all) with mi5s
couldnt call or answer (hanging phone)
speakers dont work
erarphone dont work
i flash several times the phone and reste factory it and no change.
i read somewhere thet it resolved with warming sound IC in mainboard.
have any body solution or explane to problem?

Categories

Resources