is it possible to configure wifi connection so I enter my ADSL username and password so that I can use city hot spots ....(I'm using Elf with Onix jr. 4.3 ROM)
Related
Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?
go "setting>connection>network card"
and setup a card for your router.
doesn 't work
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards
configure wireless network page
belkin 54g connected
networks toaccess
all available
network adapters page
my network card connects to
work
tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver
is this ok?
i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g
this is what it shows
General
network name belkin 54g
connects to work
Network key
authentification open
data encryption wep
the key is provided for me automatically
802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP
bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD
SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED
LEAP
SSID AUTHENTIFICATION TYPE
BLANK BLANK
IS THIS NORMAL?? SHOULD'n it show
belkin 54g??
when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found
thanks for your help..
Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure
Leap is blank for me too.
some setting differences betweens yours and mine
neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.
mine is set to connect to 'The Internet'
the key is provided for me automatically is unchecked, I manually typed it in with the key index.
use Ieee 802.1x is unchecked
check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.
looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.
Hi Wytey
Thaks a lot, your configuration works perfectly.
Kisses
I have problem to connect enterprise wifi network with wm6.1 (HTC HD) with following settings:
Authentication: WPA
Data encription: TKIP
EAP type: PEAP
then comes pop up window to enter network information (username and password) to log on. But time is not enouph (just 10-15 seconds) enter my username & password and already there is message can't long on.
My question is it possible to increase wifi login time by register? or any solutions how to solve this problem?
thanks in advance,appriate any suggestions!
Hi,
I have a wireless router at home , IP on demand, DNS address, server "x" (not needed since it is in DHCP, ok);
At office my wireless router has fixed IP, DNS address, server "y".
When I set my HTC Elf WiMo 6.1 + Blue Elves ROM up to access home network , I can not
access the office network , having to re-configure the HTC . .... and the same if I set it up to office net...
Is there a step-by-step procedure to get both working ?
Thanks in advance
Eduardo
Hello, I bought new nexus S, I am able to connect to wifi but not able to get internet access... I use 3g Network... I have tried following things :-
1. Formatted my PC.
2. Used Connectify [which works on my friends Xperia x10 but not on mine]
3. Virtual Router
4. Intel MyWifi
5. Tried CynagenMod 7.1 RC1
6. Tried Zulu zulu rom
My wifi icon on top doesn't get green... it rarely gets green but when its green i'm not able to get internet access on my nexus S i9023... I am able to connect same internet on different devices but not on this one... any help ???
yup
same thing happens to me though my wifi indicator stays green. try setting it to WEP encryption rather than WPA, seemed to help my phone a little bit
WEP ???
How can I configure WEP on connetify or virtual router ??
try...
generally, for most wireless routers, get on a computer and in the address bar in IE type 192.168.1.1 a Login box should pop up for username and password. for most netgear routers the username is admin and the password is password this is not the case with all routers though especially if you changed the Login info. Then find the security section within the router and set it up
Currently using dot os with extreme kernel. Whenever I tried to connect 802.1x network.it goes connecting to saved and same process.please help me how to connect 802.1x EAP network.