Hi, does the small tool likes that exist? Usually, we turn off infra port to save power and turn on "Receive all incoming beam" function if it is necessary. It is comlicated to set it (Settings/Connections/Beam...).
Thank you!
take a look at this forum over at brighthand they have made shortcuts to items on the control panel. http://discussion.brighthand.com/showthread.php?s=&threadid=79526 it doesn't toggle anything on or off; what it does is it brings you to the page at once no more navigating the settings page, personally I have tried the Bluetooth shortcut and it works.
Try PocketPlus2.5
There is an icon included that takes you directly to the beam setting screen.
bamse said:
Try PocketPlus2.5
There is an icon included that takes you directly to the beam setting screen.
Click to expand...
Click to collapse
I Agree, look at mine, and u can customize whatever u want with pocket plus
Phonealarm 1.54 is superb, but it's casuing me a very annoying problem, and I don't know why:
I like to have my phone set to "Vibrate" at all time. By that, I mean clicking the little speaker at the top of all WM5 devices and where you get the 2 sliders for volume of device and phone, at the bottom it has "On", "Vibrate" and "Off".
However since I installed Phonealarm my phone always reverts back to "On" - but I can't seem to work out why, there's no pattern to it - sometimes it just sits there on Vibrate, then next time I use the phone it's back to On. I can't seem to work out if things like going into the Phonealarm setup menu causes it, or clicking an alert in Phonealarm, or whatever - it just seems that after a while it'll revert to "On" without me asking it to, and it's only been happening since I installed Phonealarm.
Any ideas?
phoneAlarm 1.54
Its hard to say with this programme. The developer has built so much into this excellent app for so may devices, there always seems to be one problem or another. I would post a question in the support forum (www.pocketmax.net). Bruce (the developer) is pretty responsive. He may ask you to send a log ad he will try and fix in next version. I am waiting for 1.55, due out on the next few days
Regards
Chris
I believe you need to put the option to vibrate in all profiles. For exampe in the settings screen, if you go to a particular profile then click on sms notification you need to tick the vibrate option. To get it working on the ring tone as well set the ring option in profiles to "Vibrate and Ring". Remember to do this for all alerts for all profiles!
I believe you need to put the option to vibrate in all profiles. For exampe in the settings screen, if you go to a particular profile then click on sms notification you need to tick the vibrate option. To get it working on the ring tone as well set the ring option in profiles to "Vibrate and Ring". Remember to do this for all alerts for all profiles!
Hi
I'm new here, sorry for my English
I want play music (mp3) by headphones when only vibrate is turn off, sounds are disabled - it's possible ? or maybe is any patch which enable sounds when I connect headphones and after disconnect - disable sounds?
Thanks for help.
Greetings
I hav ethe same issue and would love a solution. I never take my phone out of vibrate but would also like to watch movies and listen to music, both using headphones as well as the built in speaker.
Try to go to Start -> Settings -> Notifications -> Notification tab, from the drop down menu select "Phone: incoming connection" and from the drop down list "ring type" select "Vibration".
(I hope you find right option, because I have Polish WM6, and I've been translating "on-the-fly")
I've write little application which set normal sounds when we connect headphones and set vibra after disconnect. I've use one tool from SmartTools and little app in c#
CAB in attachment
I thought it would be a good idea to share your Tasker profiles.
I recently discovered this app and after 3 years of using Android it feels like Android has a whole bunch of extra features.
My profiles are boring really but I'll share anyway.
My first profile puts my phone on silent between 2am and 10am.
My second profile turns off Bluetooth after 3 minutes of being unpaired.
My third and final profile waits until my screen goes off, waits 5 seconds,turns the screen on displays the time on an app called night screen lite (only between 9pm and 11am)
What are your Tasker profiles?
Sent from my Samsung Galaxy S3 using Tapatalk 2
I'm trying to work out this app at the moment, getting everything I want it to do is taking me time.. Getting it perfect
The main ones I want is
After gps is turned on I want it to launch copilot live and radardroid, then dim the screen and turn wifi off..
Also a few other things like bluetooth off after un paired from car, silent mode at night and getting locale hooked up correctly.
Sent from my GT-I9300 using xda premium
ATHOME
Set %ATHOME to 1 (Enter)
Set %ATHOME to 0 (Exit Task).
ATWORK
Set %ATWORK to 1 (Enter)
Set %ATWORK to 0 (Exit Task).
ATFRIENDS
Set %ATFRIENDS to 1 (Enter)
Set %ATFRIENDS to 0 (Exit Task).
ATCOLLEGE
Set %ATCOLLEGE to 1 (Enter).
Sends a HTTPS POST to my College WIFI Login Portal.
Set %ATCOLLEGE to 0 (Exit Task).
USBCHARGE
Set %USBCHARGE to 1 (Enter)
Set %USBCHARGE to 0 (Exit Task).
GOWORK (I have some problems with sleep in morning)
I turn wifi-on and verify if i stay in my home (ATHOME), and play some BAD song util i leave my home... the only way i found to get out of my bed in the morning. As my tasker are password protected, i can't disable it sleeping.
HOMEUSB
Disable pattern lock, put screen dim into max, things like this.
LowBattery
Shutdown all things that can speed my cellphone to get died far from a charger.
NightSleep
AirPlane mode in the night... from Mon to Thu... Fri-Sun i can be in some party...
NFCHOME (Activated by my xperia tag)
Turn on wifi and verify if i'm in the home... and wake up my computer...
Hey guys, there's a thread going with lots of profiles etc, check it out here: http://forum.xda-developers.com/showthread.php?t=1754500
I have one profile used for automatically transfering calls to my car.
Bluetooth will switch on when incoming call and outgoing call. Connect to car Bluetooth. Transfer audio to car. And Bluetooth will switch off after the call.
With this profile, I do not have to worry about switch on Bluetooth and connecting it manually eveytime I enter the car. Everything is done automatically !
Its indeed a great software.
Sent from my GT-I9300 using xda app-developers app
I have one for work that rejects all calls and sends a text, also responds to texts. Both say at work will call later, never sends the text to the same person twice in a row. Also prompts me to turn it off after normal work times. Our don't use location since I'm not always in the same place.
Also, while at work it sends my wife a random text once or twice a day. I can't have my phone at my desk and she used to complain that I never call or text during the day.
Also, face down full silent and the Bluetooth others have mentioned... Oh and low power disables everything but calls and sms.
Sent from my SHV-E210S using xda app-developers app
Ive got a few setup.
When on home wifi..deactivate pin code security, reactivate pin when disconnected (need secure settings plugin)
Same as above when paired with my bluetooth car stereo. Also set display timeout to one hour. Turn wifi off. Launch carhome app.
The usual sleep one. Turn off sync. Wifi. Bluetooth etc. Phone to silent.
Sent from my GT-I9300 using xda premium
I created another profile last night...
When I open maps, navigation or camera (geotag) GPS turns on automatically, then turns off when I exit the app.
Sent from my Samsung Galaxy S3 using Tapatalk 2
Can all of u please share ur profiles as xml files? It would be great to see them for us noobs
i use llama
https://play.google.com/store/apps/details?id=com.kebab.Llama
awesome app and free.
more info on dev homepage --> http://kebabapps.blogspot.ch/
shivark79 said:
Can all of u please share ur profiles as xml files? It would be great to see them for us noobs
Click to expand...
Click to collapse
Here are all mine:
http://db.tt/JtJi6wbB
The 'Night Stand' profile requires an app called 'Night Clock' or a similar app. After a set time, when the screen has been off for 5 minutes and the phone is on charge, it will show the time in big text and stay on for as long as you exit. Very useful for quickly checking the time during the night.
Sent from my sick ass Samsung Galaxy S3
How do you turn bluetooth off after 3 minutes?
CuBz90 said:
I thought it would be a good idea to share your Tasker profiles.
I recently discovered this app and after 3 years of using Android it feels like Android has a whole bunch of extra features.
My profiles are boring really but I'll share anyway.
My first profile puts my phone on silent between 2am and 10am.
My second profile turns off Bluetooth after 3 minutes of being unpaired.
My third and final profile waits until my screen goes off, waits 5 seconds,turns the screen on displays the time on an app called night screen lite (only between 9pm and 11am)
What are your Tasker profiles?
Sent from my Samsung Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
If you could export the XML for your second profile to turn bluetooth off after 3 minutes of being unpaired, I'd be really really grateful, or just provide the steps in your reply.
Thanks
1). Pocket Lock - Detects when phone is upside down in my pocket and activates WidgetLocker.
2). Read Caller Aloud - Incoming caller name said aloud so I can decide whether I want to answer without looking at my phone.
3). Night Mode - From 00:00 to 06:00 Puts phone into silent mode, plus checks whether Wifi, Data, GPS, or Blutooth are on, and turns them off if they are.
4). Battery Low - When battery gets to 15%, and it's not connected to a charger, Says "Battery low, connect charger" and turns off Wifi, BT, Data, GPS.
5). Music Player - When headset is plugged in, loads music app.
6). Wake on Lan - Scan an NFC tag by my front door to send Wake on Lan packets to my pc to resume windows.
7). Home - Gets general location from cell tower, activates Wifi, disables Data & GPS. Exit Task disables Wifi, and enables Data.
8). Work - Gets general location from cell tower, disables Wifi, Data, GPS, BT, and Auto Replies to sms that im working and will reply when i can.
I'm pretty new to tasker, but have been pretty bored lately and have been working on an addition to my Work profile.
This profile will, use variables to save up to 5 peoples numbers and how many times each has txted me, and txt each of them back, using their names from my contact list in the body of each txt.
So lets say BOB txts me once, his number will be added as a variable, and it will begin counting the txts from him. On the first txt he is send a txt saying, something like. "Sorry BOB, im at work, will reply when i can".
Then DAVE txts, he will be assigned to Sender2, and have a txt sent to him like above, with the second Counter and Number (%CNTR2 and %SNDR2).
BOB, realizing it's an auto-reply, decides to be funny and spam txt me, thinking he will get a reply every time. However, tasker counts his incoming txts, (%CNTR1) and when it reaches a value of 10, send just one more txt saying something like (Thats 10 txts you've sent, seems Im still unavailable).
Profile: Auto Reply
Variables:
%SNDR1 <---- BOBs cell number
%SNDR2 <---- DAVEs cell number
%SNDR3
%SNDR4
%SNDR5
%CNTR1 <---- BOBs txt counter
%CNTR2
%CNTR3
%CNTR4
%CNTR5
%TXTVAR <---- Counter determining whether a txt received is from someone new or a number already saved.
Enter Task:
Code:
1). GoTo label Sender1 if %SMSRF ~ %SNDR1
2). GoTo label Sender2 if %SMSRF ~ %SNDR2
3). " " etc.
4).......
5).....
6). If (%SNDR1 ~ 0) then SetVariable %SNDR1 to %SMSRF
7). If (%SNDR2 ~ 0) and (%TXTVAR = 1) then SetVariable %SNDR2 to %SMSRF
8). If (%SNDR3 ~ 0) and (%TXTVAR = 2) then SetVariable %SNDR3 to %SMSRF
9)........etc.
10).
11). If (%SMSRF ~ %SNDR1) <-------- Label Sender1
Variable Add (%CNTR1 + 1)
If (%CNTR1 = 1)
Send SMS (Tells this person eg. BOB I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR1 = 10)
Send SMS to %SNDR1 (Thats 10 txts you've sent me)
Endif x2
12). If (%SMSRF ~ %SNDR2) <-------- Label Sender2
Variable Add (%CNTR2 + 1)
If (%CNTR2 = 1)
Send SMS (Tells this person eg. DAVE I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR2 = 10)
Send SMS to %SNDR2 (Thats 10 txts you've sent me)
Endif x2
13). If (%SMSRF ~ %SNDR3) <-------- Label Sender3
Variable Add (%CNTR3 + 1)
If (%CNTR3 = 1)
Send SMS (Tells this person eg. EMILY I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR3 = 10)
Send SMS to %SNDR3 (Thats 10 txts you've sent me)
Endif x2
14). ......Etc.
15). ......
I'm still working on it, deciding whether to have the variables reset as they are all filled, 1 at a time, or to make them reset every hour or so. Also whether to make another profile purely for resetting those variables, or add them to this task. Bearing in mind that on my phone it gets rather annoying to manage/edit the task since its currently at 78 lines long.
As I said I was bored.
If anyone is interested in this I can post a backup xml of this somewhere.
Here are mine:
1. Kill a couple of apps on boot
2. Power Saver – mainly To turn off my WiFi profile
3. Call Brightness – while the phone's ringing, the brightness is maxed.
4. Keyboard Out – disables the display timeout for the time I've got the hardware keyboard out
5. Lost – checks for incoming SMS with one of two predefined phrases. On the first one it starts playing alarm sound (if I forgot where I placed it). On the second one it sends back the GPS coordinates and battery level and puts the same information in my google calendar, so I can see it from anywhere (source tasker wiki. Can't give the link, since I'm new here, sorry. PM me if you can't find it)
6. Sound Control – I hate the thousands chat sounds when I'm texting with someone, but I need them when the phone is not in my hand. So here's what this profile does:
Any time I turn the screen on, the sound volume will be set to 0, and phone will be set to Vibrate.
When I turn the screen off, the sound settings will be restored to their previous values, unless it's currently on MUTE. Then it'll keep it on Vibrate (!) until it's manually raised (in which case it will remember the new volume level). That's cause I never use my phone on "mute" (no sound and no vibration). If I want no sound, I keep the vibration on.
Sound Control Project:
Code:
[b]profile Display On[/b]
Contexts:
event: Display On
state: Not Call Incoming
apps: Not Alarms (or whatever alarm app you use)
Tasks:
Silent Mode: On (if %Mute ~ 1)
Silent Mode: Vibrate (if %Mute !~ 1)
[b]profile Display Off[/b]
event: Display Off
Tasks:
If %SILENT ~ On
Variable Set %Mute to 1
Silent Mode —> Vibrate
Else
Variable Set %Mute to 0
Variable Set %Volnprev to %VOLN (IF %VOLN>0)
Notification Volume —> to level %Volnprev (IF %VOLN~0)
7. WiFi Control – turns on and off WiFi when I'm at home/work.. wherever. The original source is from Tasker Wiki but it wasn't working properly so I did some changes)
Key points:
- It watches the Cell towers only when I'm not connected to wifi.
- It uses Wifi Near to check if I'm near the router ONLY when I'm within the Cell tower range and NOT connected to wifi.
- If I disconnect from wifi it waits a few seconds and checks if I'm connected before continuing.
WiFi Control Project:
Code:
[b]A: Cell Network Home[/b]
Contexts:
Cell Near {Cell towers at home}
Not Airplane Mode
Task:
Profile Status "Wifi Near Home" set to On
End Task:
Profile Status "Wifi Near Home" set to Off
[b]B: Wifi Near Home[/b]
Context:
Wifi Near {my router SSID and MAC}
Task:
Wifi On
End Task:
Wifi Off (IF WIFIC !~ 1)
... repeat A and B for each location, for ex. work
[b]C: Wifi Connected[/b]
Context:
Wifi Connected *,*,* (to any)
Task:
Variable Set %WIFIC to 1
Wait 15s
Stop (IF %WIFIC !~ 1)
Profile Status "Wifi Near Home" set Off
Profile Status "Cell Network Home" set Off
... set also profiles for other locations to Off
End Task:
Variable Set %WIFIC to 0
Wait 30s
Stop (IF %WIFIC ~ 1)
WiFi Off
Wait 3s
Profile Status "Cell Network Home" set On
... set also the cell profiles for other locations to On
I have one that sets usb debugging off at boot and displays permanent notification with usb debug status + theres an action attached to the notification that toggles debugging on/off.
This is to toggle debugging on when I need it and to make sure it's off when I'm not using it. I wouldn't want anyone to easily bypass the lockscreen should my phone fall in the wrong hands.
kaczus said:
I have one that sets usb debugging off at boot and displays permanent notification with usb debug status + theres an action attached to the notification that toggles debugging on/off.
This is to toggle debugging on when I need it and to make sure it's off when I'm not using it. I wouldn't want anyone to easily bypass the lockscreen should my phone fall in the wrong hands.
Click to expand...
Click to collapse
Can you share this tasker profile? Ether a detailed version or even better a copyed xml we can port to our tasker?
Thanks in advance :thumbup:
sent via Tapatalk 2 with my super modded SGS3 which is pimped out with Foxhnd rising v2.5
Set an alarm if my battery is fully charged.
Sent from my GT-I9300 using Tapatalk 2
deanr1977 said:
Can you share this tasker profile? Ether a detailed version or even better a copyed xml we can port to our tasker?
Thanks in advance :thumbup:
sent via Tapatalk 2 with my super modded SGS3 which is pimped out with Foxhnd rising v2.5
Click to expand...
Click to collapse
Sure, here it is.
You need secure settings with "helper" installed for it to work.
This profile uses %USB_DEBUGGING var to store current state of the setting as there is no way to read the actual state from within tasker (as far as I know).
The usb debugging will be turned off at boot, you can change this by changing the "variable set" action in "Start" task to 1.
kaczus said:
Sure, here it is.
You need secure settings with "helper" installed for it to work.
This profile uses %USB_DEBUGGING var to store current state of the setting as there is no way to read the actual state from within tasker (as far as I know).
The usb debugging will be turned off at boot, you can change this by changing the "variable set" action in "Start" task to 1.
Click to expand...
Click to collapse
Cheers mate, stupid question though how do I import this to my tasker? On the old version this was easy.... but struggling to figure this out with the new ui? Thanks mate
sent via Tapatalk 2 with my super modded SGS3 which is pimped out with Foxhnd rising v2.5
deanr1977 said:
Cheers mate, stupid question though how do I import this to my tasker? On the old version this was easy.... but struggling to figure this out with the new ui? Thanks mate
sent via Tapatalk 2 with my super modded SGS3 which is pimped out with Foxhnd rising v2.5
Click to expand...
Click to collapse
To be honest I never tried it before but after some reading I did it this way:
First put the xml file somewhere on your phone, go into your file manager, click on the xml file, a dialog should appear with apps available to open the file - there choose tasker. Do this for all files you want to import.
Now open tasker, open profiles tab and long click on it -> import, choose the imported profile name, "autostart" in this case. Then go to tasks and long click on it -> import, there should be the toggle usb task, exit tasker and restart it. The imported profile and two tasks should all be there. Now when you go to the "Start" task and click the triangle "play" icon (or reboot the phone) the notification should appear
Oh and I didn't notice that tasker did not export one of the tasks required for this to work, don't know why, so I'm attaching it here.
Sorry about the mess.
Hi,
I've recently upgraded from N to O (8.1 OPM5, rooted), and ever since then I have no LED notifications at all.
Things done:
1. Enabling "Blink light" in notification settings.
2. Enabling/Disabling the "Ambient display" setting.
3. Checking w/ GravityBox' UNC (I have the pro version).
4. Checking w/ 3rd parties like LightFlow and Light Manager.
None of these worked, and the LED was never on at any color. When using Nougat I had no problem with it.
Any ideas?
Thanks.
This is what I've seen on another website:
"To start...Oreo notifications are very different from Nougat. Not only do you need to turn on the LED as you have already done, but you also need to go into each individual app and make sure you have the same thing turned on.
Here is one example...
Go to Settings > Apps & notifications > App info > Gmail > Notifications > UNDER Miscellaneous tap on "Miscellaneous Make sound" and a new window will open and in here is where you make the individual app adjustments where you turn on "Always pulse notification light" > then go back one screen and tap on "Attachments Make Sound" and another window will open where you make the same adjustments per app as you just did.
The key here is that not only do some things have a toggle to turn them on or off, but those same toggles will open another windows when you tap on the words themselves which gives you more notification options than you thought were even available. Be patient and you will get it."
Thx for the reply, that's a good lead.
Unfortunately (for me), all settings are "on" for "Blink Light", and still the LED never turns on.
same here :/ everything is on but LED still doesnt work