Hi all,
Hope you can help, i've searched but can't anything.
I have a Touch HD and it great apart from it drops calls when it switches between GSM and HSDPA/WCDMA.
What I'm looking for is either:
A program or script the stops the phone switching between the two networks Or the registry setting to stop it switching, so I can make my own program.
I know there is band switch and I can do it in the phone settings, but Ideally I'd like the phone to be set to auto, but only use gsm for call and while on the call not switch to 3G if it detects a signal.
Hope this makes sense.
Logicalstep
HI all!
Right now I am using [Build][10.12.2010][NexusHD2-FRG83D V1.8 PPP+RMNET][Kernel: hastarin r8.5.3_oldcam] and that is quite ok for me.
However I havent found anywhere on that build an option to disable HDSPA speed.
What I would like is accept 3G but disable HSPDA. Now I only have a change to disable 3G totally and only get 2G. Basicly area where I live is keeping me a situation that phone is very often trying to connect HSPDA but then changes is 3G speed. It causes me time&battery drain.
I have found a solution to force phone only use 3G but that is what I wanted. 2G and 3G are ok but I want to disable HSPDA.
Anybody could help me?
Up, Up... anybody have same kind of need?
i also need same help regarding this, reason is my data plan only use 3g (umts) and not 3.5g (hsdpa)... but my android always switch 3g to hsdpa back and forth and drain battery much faster
is there any tweak/program/widget/application that can enable 3g (umts) only?
windows doenst have this problem cause in winmo i can switch the option easily (enable/disable hspa)... but android dont have this kind of thing
I have the same problem. I don't even have HSPDA where I live, yet it tries to connect, fails, and then connects to 3G. It's a very time consuming processor to wait for the phone to do this when I am just trying to load a website.
Yes.. maybe it will not drain much memory but.. who wouldn't want a fast internet..
Afaik Hsdpa uses the same radio towers (or whatever the name is) as Umts... just different software. so there should be no battery drain caused by this.
This mite help you
1. Go to your dialer
2. Dial *#*#INFO#*#*
3. Click 'Phone information'
4. Scroll down to the first dropdown selection and set according to your preference below...
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
Click to expand...
Click to collapse
Source http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
domenukk said:
Afaik Hsdpa uses the same radio towers (or whatever the name is) as Umts... just different software. so there should be no battery drain caused by this.
Click to expand...
Click to collapse
uhh... maybe you dont catch what us mean....
when umts change to hspda (icon change from 3g to H) then it use battery power.. in my case i use 3g (umts and not 3.5g or hspda )data plan only... but android keep searching hspda signal and THIS is when battery used the most (the process) and EVEN when my area have 3.5g covered but because i use 3g only data plan... then the back and forth process (3g<->H) will kep coming and rdrain my battery fast
so... we look for any kind of workaround so our android keep stay in 3g (umts) and not drain any unnecessary battery power searching for hspda
btw sorry for my english
agarp said:
This mite help you
1. Go to your dialer
2. Dial *#*#INFO#*#*
3. Click 'Phone information'
4. Scroll down to the first dropdown selection and set according to your preference below...
Source http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
Click to expand...
Click to collapse
i use this thing before and no luck
i use "wcdma only" as the option and android still process 3g and 3.5 back and forth, maybe android "thinks" 3g/umts and 3.5/hspda as the same?? android categorize umts and hspda as one big fat 3G network
i wonder why newer os like android doesnt have this kind of feature in winmo there is an option :
disable hspa = so hspda disabled.. AKA 2G or UMTS only
enable hspa = enabled hspda, hspa, hsupa etc.. AKA 2G, UMTS and HSPDA
try this settings
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
agarp said:
try this settings
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
Click to expand...
Click to collapse
isnt cdma auto (prl) used exclusively for cdma phones? (those phones with evdo and wimax thing) and not used for our hd2 (GSM)???
C'mon how this is impossible with newer phone software??
This feature has been in WinMo and Symbian in many years!!
It is really frustrating that almost every time my phone is trying to make HSPDA connect and then decide 3G is enough and possible. It causes some delay and sometimes also timed out errors.
agreed
my android keep going back and forth between umts 3G and hspda 3.5G like some clueless kid while 2 experienced guy (symbian & winmo) laugh at him
i know this is a old topic
i have still this issue
my phone is switching to hsdpa an back to 3g after a few seconds
when the phone is connected to my slow wifi connection everything works fine and i can use it for 3 day's
when it is connected to hsdpa my battery is empty after 15 hours and the voip connection is not working properly (i need to start a ping to some server first to keep the connection alive so i can call with voip)
I just came upon this thread, but I don't have this problem, so I can't really test it out this theory. But my thought was, what if you just went into the build.prop file and edited the ro.ril.hsxpa.category settting from ro.ril.hsxpa.category=2 to ro.ril.hsxpa.category=0. I just tested it out and it never jumped from 3g to H. My only concern is that you wouln't get the fastest speed you could be getting. Test it out and let me know though.
at this moment it is not posible to root my phone (SE Xperia pro with latest firmware)
so i am afraid we need to wait to test this
but thanks for the hint
Hi I have a L720 and made him sprint sim unlock, I'm using it in Argentina with the "claro" position the company APN and it works, sign up both 2G and 3G and the mobile internet works fine. however my question is this, in the menu of this phone does not let me change mode, GSM / UMTS network can not choose one or the other, I can only make it automatic, it is not a stock ROM that lets me choose 2G or 3G. can this be changed? or stays like this forever? I need to use that in my area 2G 3G works very poorly and do not come calling me ..
from already thank you very much.
In device info I find several options for the network mode: lte/gsm, lte/cdma, or lte only, but I want something like lte preferred. If I switch it on lte only, phone calls or sms stops working (can't receive or send). Is there anything I can try to prefer lte all the time? My Vodafone carrier in Romania doesn't support VoLTE and whenever I make a phone call it goes to 2g, then it takes a few seconds to switch to "H", but it almost never goes directly to 4g. I'm also rooted so some exposed module or something similar would also be appreciated.
Basically what I'm looking for is to prioritize lte all the time, but switch to 2g/3g when I make a phone call or there is no 4g signal. Can anyone help me out pls?