Hi all,
I'm using the TyTN in Japan on NTT Docomo network.
I often have to calll abroad but unfortunately, Docomo has had the bad idea of not using the standard "+" symbol for international dialing. Instead, I have to dial a ridiculously long prefix number ('009130010') to access international before starting the number itself.
So far, I've been entering the full numbers including the prefix in my contacts but I still have lots of numbers with + to convert.
Also, if I'm abroad, since I'm on a different operator's network, I need to use the "+" and not the '009130010'...
Anybody would know a setting, or a hack or a software that would allow me to replace automatically '+' by '009130010' when dialing (including when I dial from a contact)?
Then I would just need to disable this when I travel abroad...
Thank you,
Thomas
www.thomashumeau.com
An application that does something similar...
http://www.hkscorpio.com/members/bong/product_MyPrefixDial.htm
Could you just change your area code in Outlook on your desktop before you leave and sync it up? Not sure whether it will do what you want but I guess it might?
Howdy folks,
I am in Brazil and here one can select different carriers for dialing, with different rates.
The typical local number with area code is AAA NNNN-NNNN, where AAA is the area code and NNNN-NNNN is the 8-digit phone number.
The fisrt A is always "0".
When you select a carrier, the number becomes AxxAA NNNN-NNNN, where xx is the 2-digit carrier ID.
Examples: 011 9224-9445 becomes 04111 9224-9445 when using the carrier TIM, and 02111 9224-9445 when using Embratel as a carrier.
Here is the big problem.
I have an extensive phonebook (over 1,500 entries) and use my Wiza200 with 2 different SIM cards (daytime the company's, night time my personal one). It happens that each SIM is from a different operator, thus having different carrier codes with different rates.
Would there be a way of having an app that I tell it which carrier to use and then it handles the "dialing string" for me?
It is really painful to keep editing numbers each time aI have to call someone, especially when driving.
TIA,
-Feaps
You'll probably have to do some manual labor editing. Sync your contacts with outlook on your computer. Then make a duplicate entry for each contact, but maybe put a symbol before the last name. For example you would use "Doe, John" during the day and "!Doe, John" at night. The different entries would allow you to have different dialing strings. You could even enter different categories for the contacts then use a filter in the contacts app to only show the applicable entries. I beleive it's safe to say that your situation is very unusual so there probably is not a market for someone to make a program that handles this automatically.
Solution found
Please refer to the the following thread for a perfect solution:
http://forum.xda-developers.com/showthread.php?t=287091&highlight=feaps
Kudos to Malatesta and Giacomitti!!!
-Feaps®
Hi there, I'm wondering if anyone else might be having a similar problem with 'caller [or texter] ID'.
Most networks, as I understand it, use the international dialing code when sending out texts and calls, meaning this is usually the incoming number when you recieve a text or call.
I've obviously got people programmed into my contacts who text me but when they do, I don't get their name, I get their number - with the dialling code eg. +447750500500. When I tap to go into the threaded mode, I'll get all previous contact with this person but with them identified only as the number. However if I head to the People tab, then again to see the messages I've sent/recieved with that person, I get the same messages only under the banner of their name and not the number.
I believe calls work fine with the code programmed in on their contact profile.
Anyone know why this is being caused?
I have the same problem. Both calls and text messages.
I don't think it matters if the international code is there or not.
Really frustrating not knowing who calls.
I've had this problem first time the device was initialized (right after opening the box). It might be caused by the fact I didn't have any SIM in it at that time, I'm not sure.
After a hard reset with a SIM inserted, everything started working as it's supposed to.
Hmm, I've changed the SIM, but I can't remember if it worked wih the first SIM card.
But a hard reset deletes everything, right?
There are a few things you have to be sure of:
Do not have double contacts, if you have a number (with and without operator/country prefix) twice in your list it will not show any name.
I don't know if this applies if you have a contact on your phone memory and on your sim card. I am sure it does have this problem if you have two contacts with the same number on the memory phone.
For some reason this is logic: On an incoming call, the phones checks it's phonebook and retrieves two numbers and then it does not know what to display, is it contact one, or two?
I hope this helps you out. I did not experience any problems (yet).
AndrewCZ said:
I've had this problem first time the device was initialized (right after opening the box). It might be caused by the fact I didn't have any SIM in it at that time, I'm not sure.
After a hard reset with a SIM inserted, everything started working as it's supposed to.
Click to expand...
Click to collapse
Try this....
1. Edit one "test number" in your contacts and remove international codes.
Just put that "test" tel number. without int. codes... And make sure that number is not stored nder another contact. (No duplicates.)
2. Then dial from that number and see if that tel# is identified. If you have just "0xx-123456" then go to #3.
3. Go to registry and change of the Caller ID match rule. (Minus one digit.)
Example: Caller ID rule:8 (Change from 8 to 7 or 6 to 5 .. trailing digits for Call ID match. )
* HKCU\Control Panel\Phone\CalIidMatch value:7
4. Restart and test again...
5. If its OK, than test with SMS.
6. If its OK again , put back your international codes and test again.
7. If not go to no.3
Hope this helps.
KraFT
samluke said:
Hi there, I'm wondering if anyone else might be having a similar problem with 'caller [or texter] ID'.
Most networks, as I understand it, use the international dialing code when sending out texts and calls, meaning this is usually the incoming number when you recieve a text or call.
I've obviously got people programmed into my contacts who text me but when they do, I don't get their name, I get their number - with the dialling code eg. +447750500500. When I tap to go into the threaded mode, I'll get all previous contact with this person but with them identified only as the number. However if I head to the People tab, then again to see the messages I've sent/recieved with that person, I get the same messages only under the banner of their name and not the number.
I believe calls work fine with the code programmed in on their contact profile.
Anyone know why this is being caused?
Click to expand...
Click to collapse
Hi guys!! i had this problem too but i have fix the problem. what i do:
!) i store all my contacts in my sim card and delete the contacts in the phone.
2)do a hard reset
3)upon doing the hard reset, the phone will prompt you on importing sim contacts and finding your service provider. select both and and press ok
4)now try to call from your house to your phone to do a check.
5)my problem was solved after this
hope it helps!
KraFT_mk said:
Try this....
1. Edit one "test number" in your contacts and remove international codes.
Just put that "test" tel number. without int. codes... And make sure that number is not stored nder another contact. (No duplicates.)
2. Then dial from that number and see if that tel# is identified. If you have just "0xx-123456" then go to #3.
3. Go to registry and change of the Caller ID match rule. (Minus one digit.)
Example: Caller ID rule:8 (Change from 8 to 7 or 6 to 5 .. trailing digits for Call ID match. )
* HKCU\Control Panel\Phone\CalIidMatch value:7
4. Restart and test again...
5. If its OK, than test with SMS.
6. If its OK again , put back your international codes and test again.
7. If not go to no.3
Hope this helps.
KraFT
Click to expand...
Click to collapse
What was happening to me before the reset was a bit different - the phone wasn't able to match anything at all - even a number called from the phonebook and stored in "recent calls" in EXACTLY the same way it's in contact, didn't match to the contact when redialed.
I think that something required for Caller ID to work gets done when the phone is first initialized, and that this step requires full access to the phone module (which the phone doesn't have without a SIM inserted and a proper PIN entered).
hi,
i encountered also that worry,
i set the HKCU\Control Panel\Phone\CalIidMatch value:9
my mobile phone number to test was stored as "06xxyyzzww"
and when i phone my diamond2 from that number
the caller id is recognized
(with showing as +336wwxxyyzz)
i tested from my home phone stored in contacts as 04wwxxyyzz
i rang my topaz its was identfied as my home,
(with showing as +334wwxxyyzz)
i am in france, + is for 00 ,our phone numbers are 10 digits long
(mobiles and "home") ,
to be joined from abroad, you have to dial +33+phone number WITHOUT the first digit "0")
so the "9" value i put in the registry
if it could help you
regards
Hi,
just stumbled over the same problem.
The old phone (HTC P330) resolved numbers from my used format 01234-56789.
Since my contacts are a mess, I have 01234-12345, +49-123456-456, +49 (0123)-456 and so on, it would be a great pain in my ass to switch every contact to +49123-456 (which the new phone resolved).
I compared the Registry-Entry from the P3300 with the TD2 and voila: TD2 was 12, P3300 had the value 8.
I changed the TD2 to value 8, reboot and now I'm happy again, the phone is getting used to my contact list
Regards
Heiko
Hi,
I'm experiencing the exactly same problem, that incomming calls or messages isn't shown by name, but only by number.
I'm all new to Windows mobile, but I tried downloading a regeditor, and experimented with different values in the CallIdMatch string. However, no succes.
I live in Denmark, where numbers look like +4512345678, where +45 is the international code. Can someone please tell me, what should be the correct value? The original values was 8.
I have further found that some contacts are recognized. What the difference is between the groups, are however unclear!
Caller ID problem, my solution
I had the same problem. But after a hard reset it seems to work just fine now. Remember to backup your downloaded programs etc before doing this.
Tyven said:
Hi,
I'm experiencing the exactly same problem, that incomming calls or messages isn't shown by name, but only by number.
I'm all new to Windows mobile, but I tried downloading a regeditor, and experimented with different values in the CallIdMatch string. However, no succes.
I live in Denmark, where numbers look like +4512345678, where +45 is the international code. Can someone please tell me, what should be the correct value? The original values was 8.
I have further found that some contacts are recognized. What the difference is between the groups, are however unclear!
Click to expand...
Click to collapse
Hi,
"8" should be the good figure for you, as in France
we have phone numbers +33987654321
and "9" is the good value for me, in:
HKCU\Control Panel\Phone\CalIidMatch value:
Edit: i remove previous "edit"
in fact all my contacts had been erased" so it was normal to have no caller ID?
ps: is your carrier sendind all the figures when you're receiving calls, i mean +4512345678
so perhaps you're encountering a bug .
you should try to backup your device, with a soft like spritebackup(special price for htc owners on their webpage) and experiment an hardreset
and restore
regards
Hi ,
did you ever try to change the following:
RegistryEdit and Decreasing the CallIDMatch from 12 to 7 solved my Issue
See below
HKEY_CURRENT_USER\ControlPanel\Phone" name="CallIDMatch"
Greetings from Slovenia
Hello,
that is my first post so please do not be very critical to my english level and PPC skills .
now this is an old thread but for BULGARIA the correct registry value is "9". Here the mobil numbers are as follows "08xx 123456" (9 digits without the ZERO at the very beginning). that is why the usefull number is that (default for my TD2 was 8). Now after this fix the phone can correctly identify which number i want to dial when i am inserting it by digits, instead of selecting the exact person. i do not know am i explaining correctly but i will try to put some more detail on that. When i want to dial some particular number (for example "08xx 123456") the phone select me the correct contact no matter how i put this contact in memory. with "+3598xx 123456" or only with "08xx 123456". before that intervention the phone identifies me the correct contact only if i type the digits, exactly the same way that i have added it to the memory. So i think that this registry key does not have a universal resolution. the resolution depends on how many digits is using tha particular mobile operator.
i hope that will be helpful for someone who is happy to own an HTC and is happy with it ... like Me
Ok this might be a noob question but I DID spent more then half hour looking for an asnwer before posting and could not find my answer. so here it is.
When I am roaming every time I make a call I need to type in 0+area code+operator (phone company) before I enter the number.
However I normally use the numbers that are already in my contact list, if I click on it it will dial without the additional information, because in my home city I don´t need this codes and so I didn´t inserted the phone numbers with 0+AC+Op info.
Is there a way to configure my phone to add 0+Area Code+ Operator when I am away from my home city? And also the HD2 recognize that I am in the area code of an outside city and do not dial 0+AC+Op for this specific city when I am on it?
Thank you
Felipe
felcas said:
Ok this might be a noob question but I DID spent more then half hour looking for an asnwer before posting and could not find my answer. so here it is.
When I am roaming every time I make a call I need to type in 0+area code+operator (phone company) before I enter the number.
However I normally use the numbers that are already in my contact list, if I click on it it will dial without the additional information, because in my home city I don´t need this codes and so I didn´t inserted the phone numbers with 0+AC+Op info.
Is there a way to configure my phone to add 0+Area Code+ Operator when I am away from my home city? And also the HD2 recognize that I am in the area code of an outside city and do not dial 0+AC+Op for this specific city when I am on it?
Thank you
Felipe
Click to expand...
Click to collapse
Ok it seems obvious that I can just input the 0+phone company number+area code before the number and save it in the contacts, it works, what if I change my operator (phone company)? I will have to go thru every single contact and change each number with the new number?
I wonder if there is a way to manually input it when I am roaming, like in the old nokias and LG once I was roaming and I dialed a number in contact list it asked for area code and operator number.
hi Android Community,
i am just about to reorganize my phonebook, i have used different methods of saving numbers to my phonebook e.g. for germany 004996122222 for person xyz, 0049 stands for country code 961 stands for area code and 22222 stands for the landline, usually Android displays incoming calls like this area code "space" and landline number, it also displays the city where the area code belongs too e.g. waidhaus which is near my hometown.
i still have misc problems the way android formats these numbers. still no problems calling contacts, but one issue was when i type the phone number manually android only suggests me the phone number of one specific person i have in my phonebook either i type in this persons phone number or another persons phone number (manually!!) this is way of wrong.
it displays me this persons name either it is this persons number or any other. i have had this bug years ago with my first htc desire still preserving; it started when beginning saving phone numbers the lol way e.g. 004996122222 where it was not necessary to save it this way unless you are in holidays abroad
due to different formatting of phone numbers from persons around the globe because of the int code &the different way of handling of the leading zero according the country you call to i still have issues, i know there is a way you can edit phone nr in google contacts (gmail) so that it can be updated with next sync. but that did not helped me, still issues from what i have written above
is there a app available that removes this bug of only displaying this one persons contact either i type in his number or anyone else, i think it is because of googles data collection rage and/or my sold htc desirewhich may have had a bug in htc sense and the availability of updates for this device (now i have sgs3 and cm whatever version i dont know and have no issues atm)
or maybe it was because of my mistake setting the phone number the proper way, i think there is no wrong in setting the phone number the way +1NewYorkCityAreaCodeBureauofPersonXYZ but i did probably made a mistake in doing this way making it difficult to reorganize my phonebook.
the problem with this has nothing to do with outgoing calls as there are no problems when typing 004996122222 it always works well (destination germany either i am in germany or abroad), but when a incoming call comes from a saved contact i suggest that it would properly display the orign of the call (only as it is with landline numbers either it is within a country or abroad but no mobile numbers as there are limitations to this),
i wonder if anybody can tell me if there is a builtin library in Android that handles this task i would appreciate your answers to this topic even if i could have written a book on this topic,
wishing you can be indulgent too on my write rage even if it could be explained a smarter way, if you have questions feel free to ask.
thegrayrace said:
hi Android Community,
i am just about to reorganize my phonebook, i have used different methods of saving numbers to my phonebook e.g. for germany 004996122222 for person xyz, 0049 stands for country code 961 stands for area code and 22222 stands for the landline, usually Android displays incoming calls like this area code "space" and landline number, it also displays the city where the area code belongs too e.g. waidhaus which is near my hometown.
i still have misc problems the way android formats these numbers. still no problems calling contacts, but one issue was when i type the phone number manually android only suggests me the phone number of one specific person i have in my phonebook either i type in this persons phone number or another persons phone number (manually!!) this is way of wrong.
it displays me this persons name either it is this persons number or any other. i have had this bug years ago with my first htc desire still preserving; it started when beginning saving phone numbers the lol way e.g. 004996122222 where it was not necessary to save it this way unless you are in holidays abroad
due to different formatting of phone numbers from persons around the globe because of the int code &the different way of handling of the leading zero according the country you call to i still have issues, i know there is a way you can edit phone nr in google contacts (gmail) so that it can be updated with next sync. but that did not helped me, still issues from what i have written above
is there a app available that removes this bug of only displaying this one persons contact either i type in his number or anyone else, i think it is because of googles data collection rage and/or my sold htc desirewhich may have had a bug in htc sense and the availability of updates for this device (now i have sgs3 and cm whatever version i dont know and have no issues atm)
or maybe it was because of my mistake setting the phone number the proper way, i think there is no wrong in setting the phone number the way +1NewYorkCityAreaCodeBureauofPersonXYZ but i did probably made a mistake in doing this way making it difficult to reorganize my phonebook.
the problem with this has nothing to do with outgoing calls as there are no problems when typing 004996122222 it always works well (destination germany either i am in germany or abroad), but when a incoming call comes from a saved contact i suggest that it would properly display the orign of the call (only as it is with landline numbers either it is within a country or abroad but no mobile numbers as there are limitations to this),
i wonder if anybody can tell me if there is a builtin library in Android that handles this task i would appreciate your answers to this topic even if i could have written a book on this topic,
wishing you can be indulgent too on my write rage even if it could be explained a smarter way, if you have questions feel free to ask.
Click to expand...
Click to collapse
hi Android Community,
i googled around some keywords regarding my topic and found a way it could be solved
here it goes
contacts+formatter+android in google search box
i ll give it a try, many thanks even no answer
bye bye