Calls keep getting cut off - Touch HD General

Its driving me insane, in areas ive got a good reception it just cuts off randomly. Sometimes after 30seconds, sometimes it instantly after connecting?
Is there any way i can check whats causing the disconnet? Or any tweaks can i make? Anybody else had htis problem?

Quick questions, and depending on your answers I might know what the problem is: do you have Gyrator2 installed and running? And if you do, have you excluded from it the incoming/outgoing call process (dialogue)? I found that, before I excluded the dialogue from Gyrator2, sometimes it seemed as if holding the phone to my ear actually disconnected a call. My ear or cheek must have pressed the 'end call' button. Or so it seemed, at least.
Just a shot in the dark, really...

Related

picking up the phone takes time

I have the german T-Mobile MDA-Pro with D1. (whytf can't I specifly that in my profile ?) I experience some strange thing with it. When I pick up the phone when someone calls me (by pressing the green phone button) it takes a while until the other side can hear me.
So whenever I answer a call (by pressing that green phone button) I will have to wait 5-8 seconds after the buttonpress until I say something or else the other side wont hear what I say and still thinks I havent answered the phone yet.
Yes! indead...I've got the same problem. is it a software bug?
I too have the same problem, and sometimes it hangs up the call even when I press the green button.
I've posted before and everyone has said 'Use the search'...I have and can't find anything relevent (don't think the search facility of this is very good).
Can someone PLEASE point us.
I really do miss the speed and efficiency of my XDA2s!
I have had some experience of this, it does delay mine was worse before I got rid of all th O2 tat, it is now liveable with, however it is cutting off when I press the answer button !!! OR IS IT after conducting tests using another mobile I found out that
1) the phone does not take very long before O2 divert the call to Voicemail
2) the phone starts ringing long before you know anything about it (its worse if the phone is asleep) it can be a good few seconds before it makes any indication noises
3) it carries on playing the ringtone after the call has been diverted which gives the impression that pressing the answer button is futile.
I have talked to the technical suppport of t-mobile germany and they told me they era aware of this issue and they will be releasing an update in Q12006 that will resolve this issue.
I have talked to the technical suppport of t-mobile germany and they told me they are aware of this issue and they will be releasing an update in Q12006 that will resolve this issue.
I too have this problem and for the moment while i await any future fixes from O2 or others, i am using the following short-term fix; Under phone settings I have changed the delay period before calls are forwarded to ansafone if unanswered (this works on O2 anywa). One problem with this is that callers may give up before they are diverted to ansafone if you set the delay too long
did this really resolve the issue I was talking about in my initial post ? (that when I pick up the phone by pressing the green button the caller can not hear me for the fist 10 seconds )
I have XDA Exec and kept getting confused why my GF always sounded confused and puzzled when I answered the phone, Id say "hello" and she would wait a while, then say "Hello? you there?"
I never realised it was MY phone that was cutting off my voice at the start of the call.
In regards to the delay ringing, and answering etc, I am giving all my friends instructions to bloody well keep ringing! I turn answerphone off normally as my phone is always on. If you want to speak to me, keep ringing till i answer, if I dont want to talk, ill reject the call.
Why ring twice and hang up? I could be doing anything that takes more than 2 seconds to get that damn phone out of my pocket, get it out the case, open it, see who is calling, press the button, damn, missed call.
Same problem here. I am seriously thinking about using this as just a PDA. I don't think it's practical to use a phone that only works some times. Somebody on HoFo said that the Universal isn't meant to be used as a phone, it can, but it isn't meant to be. I'm starting to agree.
I just like the idea of not having to carry around a phone AND a pda. I kind of hoped that's what the universal offers. But it kind of looks like it doesn't ...
Its a great phone when used as a hands free device, answers almost straight away, and has great volume unlike most hands free - my callers also comment that the line quality is excellent even if a few metres away from the phone.
I do always feel stupid though when using the phone as a standard phone, would feel more comfy putting a brick to my head.
I use the old phone ringer as my incomming call notifictaion and I hear my phone in plenty of time. The standard o2 incoming notification sound was useless. I don't know what T Mobile have but might be worth trying a different notification sound.
Cheers
I will have to wait 5-8 seconds after the buttonpress until I say something or else the other side wont hear what I say and still thinks I havent answered the phone yet
Click to expand...
Click to collapse
Did anybody found a solution for this? this is very annoying.
Agreed, its just ridiculously slow - I worry whether or not I've hung up on people too, it takes a good few seconds before the line is actually dropped, let alone for the interface to update.
I've stopped using the "suspend" option and the phone seems to work like you'd expect (even on a cheap cell phone!). But the battery life is suffereing. Hopefully my new spare battery should be here soon.
I've stopped using the "suspend" option and the phone seems to work like you'd expect
Click to expand...
Click to collapse
You mean I should walk around with some spare batteries in my pockets. :wink:
I think my pockets are too small for so many things.
Does anybody knows if this problem is known to HTC? Is there going to be an update?
It isn't possible that a phone doesn't act like a phone in these features that are already working 100 years. I want to pick up my phone and talk immediatly
By the way how do I switch off the "suspend" mode?
What is the "suspend" mode and how do I switch it off?
Look at Settings>Systems Tab>Power>Advanced Tab
Uncheck to "Turn off device if not used.."
This will stop the "suspend" mode
eeek ! Now I know why I would need an extra battery ....

Loosing sounds?

Hi, can anyone advise as to why I lose the all sounds on an Orange Branded M3100 phone, other that Microsoft voice command 1.6 no other software has been installed! The details of the ROM are as follows
Operator Version: 14.123.1.614
ROM Version: 1.23.61.4
ROM Date: 07/13/06
Radio Version: 1.06.00.00
Protocol Version: 32.37.7010.01H
Here what happens no sound on the phone, reset the phone sound is now back, after a while, don’t know how long but the sound disappears, you get no ringing sound, menu click sounds nothing, reset the phone again and all is back, so it would suggest that it’s not a hardware failure but a software failure, how can I stop the orange branding installing itself after a cold reset in case something there is causing the problem, has anyone else came across this problem?
This is a brand new phone only received it Friday, does it need to go back?
Kind Regards
Dogo
I've recently noticed on my 8525 too, after a while it seems to just go on silent but the setting isn't changed it still set to on and no sound comes out of the phone no matter what program is used.
Phew, I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
To isolate whether this is hard or software you could try doing a full backup. Do a hard reset and let the device run for as long as it would normally take to show the problem, without any additional software. But do run wifi and power intensive applications to warm up the device - as this can cause internal connector problems.
If the problem is gone, this will tend towards a software problem although not an absolute guarantee. There are some issues that are related to both soft and hardware!! For example the screen fading to white issue can be caused by running (power intense) software that makes the device warm and that in turn causes pressure to be put on the screen.
A final thought, the speaker connection block is next to the stylus tip. There have been cases of the inserting and removing of the stylus causing the connector to become loose. This can cause intermittent sound or no sound at all. The warranty voiding fix is easy. Remove back and check connection is tight. No further dismantling needed. Ensure camera toggle arm is engaged before putting screws back in. (Rear Speaker)
The front speaker can also have issues. has spring contacts that can become slack - poor contact with m/board. There is a thread on checking this.
Mike
No Sound, not a Stylus issue
8525, ms voice dial 1.6,
HTweakC 2.0,
SBP Mobile Shell 1.0.0 build 2632.
ROM 1.34.502.1
radio 1.16.00.00
This has been happening about a week, nothing new installed. On Saturday I missed 12 calls because it was "auto-muted" nothing was on mute, just no ring sounds or anything else. I thought it might be some setting, I suspected that it didn't come back after I had set on vibrate for a meeting, so I went through everything, looks good. had to soft reset for audio to come back. Happened again Yesterday morning after being on charger, had to soft reset, happened again this morning after being on charger, had to soft reset. I'm suspicious of the charge ciruits, the phone was placed on a night-stand and I checked to make sure sound was working AFTER i plugged the charger in (i am an on-call engineer for hospitals) when I got up this AM the first thing I checked was the sound, no sound. Had to do a soft reset and sound is fine.
THIS IS VERY, VERY, VERY troubling.
i cant say that my sound has been "loose"
thefunkygibbon said:
i cant say that my sound has been "loose"
Click to expand...
Click to collapse
yep, I agree. My keyboard slider might be loose, but never had problems with the sound.
No sound - possible solutions
I too have had the no sound problem, but I also have a solution (well it seems to work for me and a few other people I know)
I have found that if I have more than about 800 sms messages on the phone (combined count across inbox, sent items, deleted etc...) my phone will decide sometimes to stop making any sounds.
Other symptoms include thew screen not going back to the background when problems are "closed" (well press the X button), sometimes not changing from portrait to landscape.
Hitting the reset key temporarily fixes the problem, but it strike again at any time...
I have seen this on both the official UK orange firmwares
As a side note, more than about 1000 sms messages and 5 unread sms messages and the phone will lock up about 10 seconds after the phone boots up. You have to be quick when the phone boots to go in to the sms inbox and delete 1 message before the phone locks up. This can be a bit tricky but i have done it a few times
from readingmany related threads, it looks like there are several causes for this issue. for me, it was definitely microsoft voice command 1.5 and 1.6. I turned off any notifications from voice command and my problem went away. no calendar voice announcements, no callerid, no bluetooth routing announcements, etc. voice command simply doesn't give up control of the audio sometimes, and it appears to occur most when it wakes up and announces something.
All I use voice command for now is voicedial. try that a while and see if you are fixed.
1.5 was worse, but 1.6 does it too.
good luck!
wes
saga continues
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
labrati said:
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
Click to expand...
Click to collapse
I have just read your last two posts. I am wondering whether you are saying you have a sound/ringer problem OR whether you mean the phone sometimes crashes and therefore does not ring (i.e. you then need a soft reset) and sometimes you discover you've missed a call but never heard it ring.
If the above is true then I think you need to look for the solutions for avoiding hangs/freezing. I can guide you to these or a search will show them. It certainly does not appear that you have any physical problem with the speaker/earpieces.
Mike
dogo said:
Phew , I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
Click to expand...
Click to collapse
Hi, I never had a sound issue untill I started usin my HT820's, but have noticed a few times lately that my device sounds arent working, (I dont mean always through to the bluetooth headset) and I just power off/on the device, I dont get that many calls, so I havent missed any, and wasnt sure if it was rom or bluetooth related for sure, but I do usually leave my bluetooth on, just not always the headsets, it also doesnt happen a whole lot.
Loose connector
I'm not sure if this will help anyone, but i was losing sound on my 8525. I had dropped my phone twice and the rear speaker connection had gotten loose so i opened it up following the directions at http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
and now i have sound again.
Continued Issues
Mike, thanks, the issue isn't with the phone locking up at all, it's been very stable, I think I've soft-reset probably 3 times in two months.
The phone literally will stop emitting any sounds. I can still hear if I place a call and if I place that call on speaker phone it's fine. However if you call the phone, try to play an audio file, etc there is no sound that emits from the device.
It did it AGAIN today, I tested, was able to place a call and put it on speaker and called it with my other phone, the pop up screen announcing the inbound call came up and everything else on the phone worked as it should (except no ring). I then went to settings phone and hit ok (top right of screen). BAM.. sound was working on the device again, inbound calls ring, able to play audio etc.
I did note one other possible anomaly, I have my PTT mapped to initiate voice command, when trying to use this I was unable to initiate voice command. After going to phone and pressing OK, voice command started working again. W/O voice command I'm sunk, I have 500+ contacts.
I placed a call to AT&T and I'm back on the "chronic retention" list.. ughhh.. I went through 8 treo's last time. I don't want another basket of refurbs to deal with, I like WM so much better than previous interfaces.. any ideas are very, very, very welcome.
-mike
More information
This morning, the sound was gone again, but I went into settings and started playing to see what else might induce it to work again, I tried voice command again, disabled and re-enabled, that didn't work.
I then went into sounds and that didn't work, went into Today, and Buttons neither of those worked, but when I went into input (didn't do anything, just opened it and closed it) sound started working again.
Hopefully, none of you guys have a newer ROM with the loud startup animation and attempted to turn down that volume via the registry as outlined in the wiki. Unfortunately, doing that also lowers the speaker volume so I just disabled the animation instead. Phone and bluetooth sounds fine but mp3 and everything else were also lowered to a whatever level depending on the startupanimation volume you set.
update
It did it to me again yesterday, this time only going to settings phone and pressing OK would make sound come back.
Today, the phone refused to dial or emit any sound. Would not come back after soft reset (would not dial, no sound) had to do a hard-reset (removed battery). After first soft reset a windows came up to advise that mobile voice command couldn't start...
For a darn near $500.00 phone this is pretty sad. Love the phone but gee whiz...
Daily occurance
Well, it does it every single day at least once a day, and I've noticed the phone has slowed a lot, sometimes during SMS or email the cursor goes away or I have to wait 20-30 seconds for words to complete typing after I've finished. I guess I'll get my refurb next week. Perhaps go back to palm.. dunno...
possible fix?
I turned OFF the SMS message sounds and it seems to be working w/o losing sounds again! I'll let it run for a couple of days and see if this is the deal, but I now have no audio announcement for ActiveSync, POP email, SMS, or MMS. I do have audio/vib for missed calls. Anyway, it's been up and running fine all day. Good Grief.
no fix in sight
On hold with ATT right now for another phone. It did it again today at about 10AM. Strange, it may be time sequential, but it didn't do it at all yesterday.. it was great to have the phone ring.

dial another user during a call

Hi,
No idea how I'm doing this, but quite often (1 call in 3 at least) i end up putting the current call on hold and dialing somone else.
IT's really really anoying, but as the phone is up agaist my ear at the time i have no idea how im doing it!
has anyone else been as stupid as me? and does anyone know how i can avoid this behavoir with out resorting to holding the phone a little away from my ear... (yep i look like a mupet on the phone at the moment...)
You can hit the power button on the side of the phone while in a call and it will turn off the screen and buttons without ending the call. Personally I just use a blue tooth headset.
Heh, yeah, screen OFF is always good. at least it hasn't gotten to this level= My Ex doesn't lock screen and calls me accidentally at least 2-3 times a month! Boy, I have heard some interresting conversations/goings-on in the background! ...Quoting Mr. Mencia...."Deh Deh Deh!"

Accepting calls problem

Phone will hang and drop the call, it does not matter if i use the button or slider. I'd guess it happens half the times or so..
Could not find any threads on this here, so i'm guessing it isnt a problem for most?
I have the same problem. Wondering if it is a known problem, and if there is a solution?
Mine can be well temperamental when answering a call.
Sometimes the vibration carries on for 4-5 seconds into the call. Sometimes the ringtone takes ages to stop, sometimes I do the slide-to-answer thing and it hangs - meanwhile the other person has rung off.
I don't know what causes it, but it's very annoying!
Meza1 said:
Mine can be well temperamental when answering a call.
Sometimes the vibration carries on for 4-5 seconds into the call. Sometimes the ringtone takes ages to stop, sometimes I do the slide-to-answer thing and it hangs - meanwhile the other person has rung off.
I don't know what causes it, but it's very annoying!
Click to expand...
Click to collapse
I have had it become unresponsive, trying to answer a call, while it would keep vibrating until i took the battery out..
i take it youve tried the slider fix?
jonajuna said:
i take it youve tried the slider fix?
Click to expand...
Click to collapse
Yes, that just made the slider less laggy.
The problems with the call function are so annoying that I decided to use a Nokia for calls and the HD for all the rest. So I am carrying two devices with me. What a progress!
Where can we find the fix for the slider problem?
Can you post a link to the fix you mentioned before please?

Screen wakes up when outgoing call is connected

Ok, this is really annoying:
Every time I make a call, the screen turns of when I place the phone to my ear. However, when the person I call answers, the screen wakes up again. I have repeatedly managed to end call, turn on speaker etc. using my cheek. The only solution Ive found is to remove the phone from my ear for a while and then bring it back. The screen then turns of for the duration of the call. The only problem is that its really annoying and that I cant here whatever the other person is saying for a couple of seconds.
So, does anyone know of a better solution?
I have the same problem. Any advice will be greatly appreciated.
I did a hard reset and though I have not installed alla software back I use TouchLockPro and it does not wake up anymore when call is connected.

Categories

Resources