i have g3 and i try to upgrade , and i used ruu g4 after restarted entered to windows normally , but i wanted to reset it again , after reseting it is tuned off , but didn't start
Related
it's been 3-4 days that i'm trying to flash my wizard .
i tried a lot of roms , but none of them really finish the job .
here the thing .
i have G4 with wizard_love on it ( how come it's allowed to flash with RUU the wizard love rom , and not the other roms like NBD , Blackdiamond ?? )
anyway , i copy the 2 cabs files , install them , soft rest and then flash with shelltool( of course turning off the phone calls and SD card is out ) . shelltool doesnt finish the flashing process . i leave it for 2 hours once , and it's still stuck .
what am i doing wrong ?
please help me flash my wizard
mohen said:
it's been 3-4 days that i'm trying to flash my wizard .
i tried a lot of roms , but none of them really finish the job .
here the thing .
i have G4 with wizard_love on it ( how come it's allowed to flash with RUU the wizard love rom , and not the other roms like NBD , Blackdiamond ?? )
anyway , i copy the 2 cabs files , install them , soft rest and then flash with shelltool( of course turning off the phone calls and SD card is out ) . shelltool doesnt finish the flashing process . i leave it for 2 hours once , and it's still stuck .
what am i doing wrong ?
please help me flash my wizard
Click to expand...
Click to collapse
I bricked my old G4 trying to use the shell tool, it never worked even with the steps being followed perfectly, It's just luck of the draw I think. I reccomend going to http://www.imei-check.co.uk/m3000unlock.php and paying the money and unlocking it, it worked for me although my G4 was still unable to be recovered. Once you unlock the flash process is a snap.
I use vista and shelltool always hangs and some point for me, but it still works, at the point it hangs i leave it for another 15 mins just to be sure, then unplug and hard reset.
If you don't hard reset the phone during the last stage the rom won't install to the device properly.
Shelltool works just well. Sometimes really doesnt show Flasg DONE, make hard reset, but u can after 12 min. just unpluge tha phone and make H R. It works every time.
I'm using Vista, but everytime I flash, I use VMWare and install XP.. Works fine.
Dear friends :
today i see that my unit is crashed and it didn't work , just an still today screen with no response to anything.
I did a soft reset ,but after a soft reset , it just the first time , a crashed today screen .
Then I did a hard reset and on first boot screen with HTC logo appear " No GSM " and when my unit boot , no GSM services is available.
then I go to a ROM upgrade with original ROM and the same rom that installed on my device , but at 12% of process a " Communication Error " has been shown on the PC .
I try to recover the error , but one more time the update process stoped at 12% and now when I Turn my unit on , just a three color screen and nothing else .
please help me that what can I have to do for this problem .
thank you .
Anybody can Help me ?
Are you trying to update on a PC running Vista?
Have you tried AP3?
No I do an Upgrade with windows XP SP2
I didn't try AP3 , because I can't do a Hard SPL ! my unit didn't unlock with HARD SPL softwares .
Many thanks for your answers
Did you try the s/ware form here http://forum.xda-developers.com/showthread.php?t=316846 ?
dear Confucious
Yes I test this software , but it didn't unlock my phone , now my unit didn't have IMEI ! code on device information .
I up my shadow to 6.1 . The first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many)
When it restart, I can't enter the homescreen, it came to the green screen and hang.
Help me please. (
My shadow is frozen...! also
dear all experts ...
I have the same problem:
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?
have you guys both ran the CID unlocker?
dear t mobile shadow rom developpers,I've the same problems as the other,and I think that the phone should be cid unlocked via bootloader,as in my case,I've recently flashed my shadow with wm6.0 but their was an electricity faillure,and now it just hang on the splash screen,and when I use mtty and set 32,I saw that my device is cid locked but mine has no os for now,and I can do hard reset,enter bootloader,but I'm not able to flash any over os,as well as the original t mobile rom,so please,help us to revive our loved phone,please,I love this phone so much but I have not enough money to buy a new one
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
Hy guys and first off all please excuse my awfull english (i`m from Romania).
Lets start...
A friend bought a Optimus 7 E900 and gave it to me for repair. I was thinking that was a soft brick.
The PHONE displayed Memory Card error. Tried to hard reset and no good. Tried to open it in Cold Boot mode no good.
I followed all turorial here on Xda and none of them worked.
First i`ve flashed the phone with the original Tim Italy firmware via LGDP2_V36_UMTS and after the 10 point where Reset is happening a error occures ( ErrNum 6 Open Port) and the phone does nothing ( just black screen after 20 minutes).
Tried almost all available firmwares found here and no cure for it.
Please Help Me !