How to Disable GRPS usage on 6.1? - XPERIA X1 General

hey guys...
yesterday i came back home after my vacations..and re-inserted my local SIM card ..and whenever i opened the Sony ericsson Xperia panel 1..it automatically connects to the GPRS for RSS & weather updates.
I went to Comm Manager and switched off data connection.. but again whenever a net service is reached..it starts connecting to my operators GPRS...and its expensive for me here as its based on data usage.
i tried deleting the GPRS settings but still GPRS has become an auto default connection on my X1.
this didnt happen before i went for vacations 2 weeks back.
any help on disabling GPRS permanently?
i like to use WiFi only.
worried about my heavy bill this month!

See this thread it seems there are several possible answers:
http://forum.xda-developers.com/showthread.php?t=463097

There's an application called "NoData" that you can use to switch the GPRS off and prevent it from being used.
Alternatively, CommMgrPro has the same ability and can be configured to automatically disable GPRS whenever the phone is rebooted.

Related

Data roaming charges in flight mode

I currently have the Cingular 8525 and recently went down to Baja for a week. I had the phone function on to let me know when a call came in and then would go to the local internet cafe, switch the phone function off using "flight mode", confirmed phone function was off in "Comm Manager" and looking at "Settings/WLAN Settings" for the WiFi establishment.
I would then use Skype on the WiFi network to make calls back to my cell phone carrier to retrive messages.
Upon returning to the U.S. and reviewing my usage on the Cingular Web page I find that I have "Roaming Data Charges" to the tune of about $120. I have talked to Cingular and they were perplexed as to how the data charges were incurred if the phone funciton is turned off. HTC technical services were equally perplexed. HTC came up with the solution of pulling the sim card out to totally disable the phone function while still allowing WiFi access. In the states I have unlimited data access so this is not an issue, but since I travel abroad frequently, this could get costly without a simple solution (pulling the sim card out each time is not a simple solution).
Is there anychance that one of the following apps are allowing my phone to indicate that the phone is in flight mode (phone disabled) while still broadcasting in GSM/UMTS.
All thoughts on the subject are appreciated
Phone: Cingular 8525
Apps: PTTfix.cab
BandSwitch.Arm4.cab
Not sure if this helps, but after a couple of rediculously high months of data usage on my Orange UK contract, for two months I did not use any data features on the phone unless it was docked with my laptop, using it's broadband connection to browse on the phone. The opposing arrows signal was showing, signifying that my tytn was using the laptop's connection. My bills still show high usage, I had NoData running, blocking all Gprs usage.
Is it possible for the sim card to be still recording the data transfer and wrongly charging me for the usage? I have tried speaking to Orange about this but each time they have not understood what I'm talking about.
I'd sugggest you to try Spb GPRS Monitor.You need to play with it to tune it right way. It allows to monitor up to 5 different connections, and have a Today plug-in and an indicator in the top bar to show the activity. It helped me a lot by signalling that my phone uses GPRS instead of WiFi (no, I never even heard of GPRS/UMPT in flight mode!).
I have it set up to monitor GPRS for two SIM cards I have, connection via USB and BlueTooth. For any other type of connection (incl. WiFi) it does not indicate anything. Quite enough for troubleshooting, and also to understand your bills.
Probably there are similar apps, I never tried them.
Thanks for the suggestion on SPB GPRS Monitor.
I put the SPB GPRS Monitor on the phone and low and behold apparently any time the system kicks into the GPRS data mode, and it seems to do this on its own every once in awhile you get charged for the link whether you use it or not. SPB GPRS Monitor does a good job of letting you know if your not paying attention to the Martini Glass icon up top.

Network selection hierachy - Wifi vs GPRS (Kaiser)

When I'm in the house (and assuming I've got the wifi switched on on the Tytn 2), how do I get it to use the Wifi to access the Web as a first option?
Even when its connected to my wireless LAN (which it does with no problems at all - much better than my old Wizzard), if I launch Explorer it automatically makes a GPRS connection. The only way to force it to use the Wifi seems to be to turn the Phone off in the comm manager - which then means I can't receive any calls.
I can't find any setting that dicates the network hierachy i.e. that says if there is a Wireless LAN connection then don't bother with GPRS, or if there isn't, then use GPRS.
I seem to recall there was something similar on desktop Windoze where you could have it automatically use a dial up connection if there was no LAN available.
Can anyone help?
Iain.m said:
When I'm in the house (and assuming I've got the wifi switched on on the Tytn 2), how do I get it to use the Wifi to access the Web as a first option?
Even when its connected to my wireless LAN (which it does with no problems at all - much better than my old Wizzard), if I launch Explorer it automatically makes a GPRS connection. The only way to force it to use the Wifi seems to be to turn the Phone off in the comm manager - which then means I can't receive any calls.
I can't find any setting that dicates the network hierachy i.e. that says if there is a Wireless LAN connection then don't bother with GPRS, or if there isn't, then use GPRS.
I seem to recall there was something similar on desktop Windoze where you could have it automatically use a dial up connection if there was no LAN available.
Can anyone help?
Click to expand...
Click to collapse
I'm now getting the same thing using Emoze - the thing is sitting here connected to the Wifi & will sync mail & contacts etc over the wifi quite happily - but as soon as I try & send mail from the handheld it starts up not one but two GPRS connections (!) Much the same as if I try & get a web page up - it automatically goes to GPRS as its default route to the internet despite that fact that its already connected via wifi & the only way to stop this behaviour seems to be to switch the phone off in Comm Manager.
Seems to be something inherrantly odd about the way the Tytn 2 is deciding what network connection is available & which it should use. It looks like it needs a little control application to sit between the IP stack & the hardware so that when a request comes it can be routed according to user preference - i.e. Use WIfi if available, Only use GPRS etc The Wifi doesn't seem to fire up a connection when it feels like it - only the GPRS. Do all the HTC devices with WIfi behave this way?
In the meantime, does anyone know of a simple way to turn off/disable GPRS without disabling the phone?
WHile I have plenty of GPRS data allowance in my package when I'm in the house at my desk (or anywhere else I can get a wifi connection) I'd rather it just used the Wifi to sync itself or if I decided call up a web page.
Besides, it interferes with the hi-fi speakers in my study with that annoying buzzing noise everytime the GPRS gets busy.
I.
Hi guys,
I use 3 different wifi networks during the course of a day, well 2 a day, 3 through out the week probably. Home/Work/Friends house
I have a very small data package (5mb) so i am very choosy about when I use my data connection!
Anyways, did some testing.
I already know that if I have no wifi, no data connection on, then I try and start outlook or Internet Explorer, then my data connection starts up (as it should)
now if i have my data connection on, then i turn on wifi on the phone, the wifi connection takes over and the data connection is not being used, even though it's on.
I also have no problems with when wifi is on and data is off, and if i goto outlook or IE, that gprs decides to go on. this does not happen tome (unless for some strange reason wifi cuts out, gprs tries to take over)
So i dont know if its something with your settings or not, maybe your phone goes to sleep and wifi turns off then gprs takes over, or i could be misunderstanding your question, because now that I think about it, perhaps you are asking something like..
- at home no wifi or data connection is active at that moment
- you navigate to a page in IE and instead of gprs turning on, wifi turns on/scans for lan and uses that
Yeah, that's probably waht you are asking.. haha yahoo for long winded useless post
If you figure it out, i want to know! lol
Iain.m said:
I'm now getting the same thing using Emoze - the thing is sitting here connected to the Wifi & will sync mail & contacts etc over the wifi quite happily - but as soon as I try & send mail from the handheld it starts up not one but two GPRS connections (!) Much the same as if I try & get a web page up - it automatically goes to GPRS as its default route to the internet despite that fact that its already connected via wifi & the only way to stop this behaviour seems to be to switch the phone off in Comm Manager.
Seems to be something inherrantly odd about the way the Tytn 2 is deciding what network connection is available & which it should use. It looks like it needs a little control application to sit between the IP stack & the hardware so that when a request comes it can be routed according to user preference - i.e. Use WIfi if available, Only use GPRS etc The Wifi doesn't seem to fire up a connection when it feels like it - only the GPRS. Do all the HTC devices with WIfi behave this way?
In the meantime, does anyone know of a simple way to turn off/disable GPRS without disabling the phone?
WHile I have plenty of GPRS data allowance in my package when I'm in the house at my desk (or anywhere else I can get a wifi connection) I'd rather it just used the Wifi to sync itself or if I decided call up a web page.
Besides, it interferes with the hi-fi speakers in my study with that annoying buzzing noise everytime the GPRS gets busy.
I.
Click to expand...
Click to collapse
You should be able to use the comm manager to turn off the data connection, but as for keeping it off permanently, until you decide you want it to be even allowed to be active again maybe you can try this, it should disable your connection until you see fit.
http://www.modaco.com/content/Pocket-PC-Software/246171/New-FREE-Utility/
briggs81 said:
You should be able to use the comm manager to turn off the data connection, but as for keeping it off permanently, until you decide you want it to be even allowed to be active again maybe you can try this, it should disable your connection until you see fit.
http://www.modaco.com/content/Pocket-PC-Software/246171/New-FREE-Utility/
Click to expand...
Click to collapse
Great little utility , thanks very much for pointing that out - it at least allows me to do what I want manually - i.e. use my wifi without having to turn the phone off.
Although I know you can disconnect GPRS from the Comm manager, it also doesn't seem to have an idle time out so once an application (like Emoze) has started it up it keeps running in the background. Also, as soon as you turn it off, inevitably Emoze turns it straight back on! The NoData application gives much more control so thanks for that.
I do go abroad reasonably often so also happy to be able to use it for its primary purpose of disabling GPRS whilst roaming to avoid silly charges
It would be great if HTC could build a bit more intelligence and control into the network side of these things though.
I.
You may want to look into Schaps Advanced Config or KaiserTweak for wifi/gprs settings.
You can set timers and disconnects, etc, with those applications.
Iain.m said:
When I'm in the house (and assuming I've got the wifi switched on on the Tytn 2), how do I get it to use the Wifi to access the Web as a first option?
Click to expand...
Click to collapse
The Good News: I fixed this behavior on the phone w/o any 3rd-party utilities, etc.
The Bad News: I'm not 100% sure how. :-/ My apologies. Here is what I think did it:
Make sure your browser is closed and you have no open data connections.
1- Open the Wireless Manager and make sure "WLAN" is on and "Data Connection" is off.
2- Go to Start>Settings and choose the "Connections" tab along the bottom.
3- Open "Wireless LAN," choose your home wireless network, and make sure you're actively connected to it (should see a signal quality meter, device network settings, etc).
4- Close "Wireless LAN" and while "Settings" is still open and on the "Connections" tab, open "Wi-Fi." Your list of known Wi-Fi networks should be showing: make sure your home network says "connected."
5- Close everything back out to your "Today" screen.
When my Tilt is set this way -- and actively connected to my WLAN -- the Wireless Manager grays out "Data Connections" and doesn't even respond if I tap the icon. IE automatically uses my WLAN, although it won't connect to some of its pre-loaded favs b/c, I think, they're on WAP servers and the Wi-Fi/NAT router assigns/negotiates TCP/IP protocols for your phone.
I think now I accomplish all the above by simply opening the keyboard and pressing the FN/Wi-Fi key.
FYI -- In truth, I solved this problem by installing Opera Mobile and setting it as my default browser. Opera Mobile is a full browser, i.e. doesn't use WAP.
Hope this helps. If not, sorry for this 5 minutes of your life you'll never get back. :-/
gT

Data Connection question

I have noticed my Xperia has turned on the data connection a few times without me requesting it to. I was not doing anything, so hopefuly i will not be charged (i don't have any web usage in my contract).
Is there anything i can install that will password protect the data connection or at least stop it acciedently turning on?
Had the same with my Prophet - in the end I installed SPB GPRS Monitor which gave me an idea of how much it used (could also set it to warn you when it went over limits, cut connection I think, etc)
Next to that, whenever I wanted to disable it (e.g. roaming, etc) I changed the networks used (settings-->connections-->select networks) to something without settings, that way programs that connected automatically didn't find the right settings and couldn't connect (for when the phone was in my pocket etc).
Not sure if there is an app available now to PW protect the data connection - been on an unlimited plan for a while now (internet/rss feeds etc).
I had a similar issue until my data plan became active.
There's a free program on the modaco website called nodata that allows you to turn off/on the data connections when needed. It worked very well whilst I was using it.
... here's the link NoData Utility (Modaco)

Force E-mail to use WiFi

I gave my wife my old 8125 to use when her phone went out, now she's hooked on it & wants to be able to check e-mail. she dosen't have or want a data plan on it, and is home most of the time, but can't get to the computer b/c of other responsibilities.
I have set it up to access wifi, and it will use it for PIE, But when I set up the e-mail account it wants to dial out to check. I have tried setting the account to work, and internet but it just won't work, If I let it use medianet it's fine.
Any ideas?
I have not found a way to keep WIFI active at all times and doing so would kill the battery in just a few hours anyway. (seems to be more problematic on secure wifi networks)
This is the solution I use because I don't have an unlimited data plan and I don't want anything using the mobile phone network and thus being charged for data usage.
I stop GPRS on the phone using a freeware program called "NODATA". It toggles off the data connection to the phone company. The phone itself and text messaging still work without GPRS. I can then connect to a hotspot and everything else uses wifi instead. SMTP mail, internet browsing, google, search, etc. all flow through the wifi and I don't get billed for it.
See - hXXp://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
Works great for me. Simply toggle GPRS back on only when you need it...
I've heard of others setting up "fake" GPRS connections settings and switching to those. Since the "fake" connection fails, it rolls over to WIFI. But this is much simpler.
db90483 said:
I have not found a way to keep WIFI active at all times and doing so would kill the battery in just a few hours anyway. (seems to be more problematic on secure wifi networks)
This is the solution I use because I don't have an unlimited data plan and I don't want anything using the mobile phone network and thus being charged for data usage.
I stop GPRS on the phone using a freeware program called "NODATA". It toggles off the data connection to the phone company. The phone itself and text messaging still work without GPRS. I can then connect to a hotspot and everything else uses wifi instead. SMTP mail, internet browsing, google, search, etc. all flow through the wifi and I don't get billed for it.
See - hXXp://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
Works great for me. Simply toggle GPRS back on only when you need it...
I've heard of others setting up "fake" GPRS connections settings and switching to those. Since the "fake" connection fails, it rolls over to WIFI. But this is much simpler.
Click to expand...
Click to collapse
try wifimonster

GPRS issue

As I don't have an unlimited data plan, I've installed "netdroid" which is supposed to toggle data and/or wifi on and off. (I use it only for data).
Problem is that at 1st use, it works fine (gprs connection and disconnection), but then I can't connect anymore, and only a soft reset can take care of that.
I don't think it's a problem with the application because I've tried it with "quick settings" and it does the same.
Thank you for any hint.
GPRS issue (rom modaco r13)
I have similar problem. GPRS works ok when i start my phone. I use apndroid to switch between gprs/wifi settings. After wifi use, my gprs settings doesn't work any more. Icon appears in taskbar, but it can't receive data. When i restart my phone, gprs works fine until i use wifi again. Is there some way to restart network on phone without restarting whole phone, and what is happening with network during restart?
Thanks
Mladen.

Categories

Resources