please help me, I don't why but I'v setted the hd to deactivate screen after 1 minute, it works for some hours or for a coulpe of days then the phone forget this and it doesn't turn off the screen anymore...
it's very hurting becuas if I receive a call or I miss a call and I'm not here to turn-off the screen pressing on/off botton the screen may remains active for hours, with obvious battery drain -.-
what Can I do? maybe some registry modify to force phone?
You have set it to off the screen for both battery and AC cases already?
eaglesteve said:
You have set it to off the screen for both battery and AC cases already?
Click to expand...
Click to collapse
I set battery alimentation 10 sec light down retro-illumination an 1 min goes to stand by
pc or electric alimentation, 2 min ligh down retro-illumination and 5 min for stanby
sometimes my hd won't to go in standby mode
jackthekayman said:
I set battery alimentation 10 sec light down retro-illumination an 1 min goes to stand by
pc or electric alimentation, 2 min ligh down retro-illumination and 5 min for stanby
sometimes my hd won't to go in standby mode
Click to expand...
Click to collapse
I wonder if file corruption might be a possible cause. Try changing the value to anothe one to rewrite into the memory again at see if this helps.
I have in the past experienced inability to connect to network although all my network setting appear correct. But if I delete the entire setting and re-add that back, everything works again. I think this might be the same cause.
eaglesteve said:
I wonder if file corruption might be a possible cause. Try changing the value to anothe one to rewrite into the memory again at see if this helps.
I have in the past experienced inability to connect to network although all my network setting appear correct. But if I delete the entire setting and re-add that back, everything works again. I think this might be the same cause.
Click to expand...
Click to collapse
ok, but the strange thing is that the most of the time it woks ad intended, sometim the phone seems 'forget' the setting..
is there a registry key by that I could force the os?
jackthekayman said:
ok, but the strange thing is that the most of the time it woks ad intended, sometim the phone seems 'forget' the setting..
is there a registry key by that I could force the os?
Click to expand...
Click to collapse
Random bugs are the hardest to catch, unfortunately.
eaglesteve said:
Random bugs are the hardest to catch, unfortunately.
Click to expand...
Click to collapse
however I hope that with a new rom (nobrand rom) all this bugs may be fixed
Related
So, after diggin' for long time in registry on Pocket PC 2002 ROMs I've found nice feature - HKLM\System\CurrentControlSet\Control\Power\
(may vary cause this is from 2003 ROM, for now I have but was like this and works on 2002), has value WakeUpPowerOff = 180 (by default).
This value (in seconds) determines, how long device will be on after:
1. power on by "power" button (and no other activity - no taps, no any hardware buttons pressing) - it userful for example to see "what's on
today", time, etc...
2. power on by incoming event like SMS or calendar one.
And after you touch screen\ other button - then as I found starts another, "original" timer, defined in Start->Settings->System->Power.
I've set above WakeUp parameter to WakeUpPowerOff = 12 (smallest that works really at mine device) and what I got? This:
When I need to look into today's or time or missed calls etc - I just press power look at screen and devices turns iself off byself. Not great effort but - heh - longer live for power button
But this is more important: When incomes SMS (I have gate from internet inbox to sms so have a lot of smses) - devices comes on only for 12 secs - for day it increases significantly battery life. (aha - 180sec and 12sec - differs!) (etc...). So we can set auto Off timer for 1 minute and work in normal mode (when we tap or read something, smaller is not so much siutable), but with this WakeUp timer also when we don't use device we get very small time to byself on\off-ing and longer battery life.
But after appearing 2003 in my wallaby and then after bying himalaya I have changed this parameter with no effect.
Now I find solution!
We need to change one more parameter in that registry subdirectory named:
DisableGwesPowerOff=1 by defalut. Simpy set it to 0.
And now on my XDA II (and on XDA I with 2003) this hacks works.
I think this will be userful for our XDA community. Thanks for paying attention for this text.
Hey, that is a very, very cool hack! I have always been annoyed when my XDA2 is in my pocket and I receive an SMS when I can't reply. During the 2 minutes before it switches itself off I find that the screen gets pressed a lot in my pocket with sometimes disastrous results.
This hack seems to have no side-effects at all. The XDA2 stays switched on in the cradle and changing the Power-off-on-battery setting doesn't reset this auto-off timer.
I dare to suggest even that it is perfect! Thank you very much nugged.
Thank you realy love this one :idea:
Works fine with 5sec off on XDAII.
goodluck
2 SiliconS: That's some kind of pleasure to share with info and to help.
2 eme: 5 sec? hmm... Ah! I think I have bigger lag cause I have setted up password protection and maybe it needs some time to initialize after on/before off... You haven't password protection on?
Anyway - it's works.
I've just had a thought: does this hack affect the alarms and appointment notifications? Does the machine turn itself off after 12 seconds and stop the alarm working? That might be a problem for some people if so. I can't test at the moment - my wife is asleep
Edit:
Just tested, quietly . It does affect the alarm. I set a repeating alarm. The machine turned on, sounded the alarm once and then switched off. When I turned it on again a few seconds later it sounded a repeat.
I think this hack is excellent if you don't use your XDA2 for alarms or notifications. Otherwise it might cause problems. :?
@nugged:
every PocketPC turns itself automatically on at midnight, to perform some magic regarding alarms etc. It is a known problem that sometimes it turns off too soon again, before having finished its work. There are even programs to make this time-out longer. Question: does you hack also affect this time-out, or is it something completely unrelated?
Cheers
Daniel
2 tadzio: Mine never do this. What "reorganization"? Mine works fine, don't miss any appointments and haven't midnight magic power-ons ...
2 SiliconS: Yes, so that's maybe who need to have long alarms install additional soft and\or set up time longer, smth like 15 seconds.
As for me - yes, I use mine device lot of time so it often in mine hands and at my eyes so I don't need long alarms.
Lets explore info above (at 1st post) here more deeply maybe someone find solution for short WakeUpPowerOff time and working long alarms if needed.
Put down the pipe!!
What are you guys on, hacking the on time? I must be really confused... what about just using the power settings to turn of backlight after 10 seconds and power off if not used for 1 minute?
That's all I ever do and mine lasts easily through a weekend with a few hours of talk time and checking my e-mail at least 20 times.
2 wayandrs: That's your decision If you satisfied with that standard system - good . Anyway - it's not an order - it's just advice
Look - when you setup to run your backlight off after 10 seconds - try to work normally then .
nugged said:
2 tadzio: Mine never do this.
Click to expand...
Click to collapse
Yes, it does. You just don't see it because it's only a partial power-up: the display does not get switched on.
The OS needs to clean up appointments, and set alarms for the new day. Most of the time it succeeds, but sometimes the device powers off automatically before the OS could finish, resulting in alarms not going off. This is what tools like "Wakeup Tweak" are for - they just extend the time-out until the device powers down again.
Also, zendrui (the PocketZenPhone author) had a lot of... umm... fun with this feature when users configured PocketZenPhone to automatically switch modes at midnight. Ask him, I think he knows a lot more about this than he ever wanted to know.
Cheers
Daniel
I miss the old 2003 future and wish SMS dose not turn IMATE-II on..
hope some body listen there and give a soltion. it was built in before some bodies complain about it.
2 eme: 5 sec? hmm... Ah! I think I have bigger lag cause I have setted up password protection and maybe it needs some time to initialize after on/before off... You haven't password protection on?
Yes, no password protection.
Btw I managed to connect over BT to Linux machine and have acces to local net and web. That 's nothing ok. But managed also to use device cca
100m+ away form my BT acces point. Just put USB dongle on extended
cable and if possible outside of your room. My is on the attic.
Think, PC makes som interference to BT rx for sure. If anybody interesting
on this can write som more..
goodluck
2 eme: after setting this hack do you have some troubles with 'midnight self turning-ONs of device with turned off display and some reogranization' as tadzio has?
2 tadzio: so, device turning itself on withot turning on display? Sounds very interesting. Anyway - we can say so our devices stays on every time even turned off by the key, they only slowing down processor and turning off display and some hardware, cause they need to refresh SDRAM memory, to track and remember appointments to wake up at needed time, etc.
And, anyway, if this 'midnight ONs' are have place, if they are not turning on display - ppc works in another mode and I think this registry value is not related to them. But this - for me - is very strange information.
Please, Daniel, give detailed info/links, if you know this question good or don't bewilder other peoples, who read this topic.
nugged said:
2 eme: after setting this hack do you have some troubles with 'midnight self turning-ONs of device with turned off display and some reogranization' as tadzio has?
I do not have any appointments stored in my device.
Cant wait for Linux to run on it with graphical enviromet.
Than we can all forget this misterious M$ hacks.
Click to expand...
Click to collapse
eme said:
nugged said:
2 eme: after setting this hack do you have some troubles with 'midnight self turning-ONs of device with turned off display and some reogranization' as tadzio has?
Click to expand...
Click to collapse
Oh, I didn't mean to say that I have any problems. In fact, before I apply this hack I wanted to make sure that it will likely not cause any problems, that's why I asked if the author knows about any possible interaction between the midnight wakeup and his hack. I would suspect there is none, but I am not sure.
Cheers
Daniel
Click to expand...
Click to collapse
nugged said:
Please, Daniel, give detailed info/links, if you know this question good or don't bewilder other peoples, who read this topic.
Click to expand...
Click to collapse
Here is more information about this: http://www.mtekk.com.au/browse/page826.html
Cheers
Daniel
problem need help
Alrite i tried with a 12. It works well. As expected, but things happen when my phone rings, with a long rintone i have, it got cut off and then it went back to standby mode, making the call still ringing behind the background, after a while it was turn on again. It annoying when i cannot hear the first part of the ring. I end up not picking up importants calls... Anyway to help this desperado? ow i want to change back but its like the same...
I know I know there are tons of topics about this
But here this out. I ve got the problem for about a week and hope some one can help me out.
After 30 secs my screen goes to dimmed-fase ( correctly as I setted )
And after 1 min. it suppose to auto turn it off but, it does try to by it only locks it down so the screen stays dimmed and doesnt go in standby ( total black screen and stuff )
Any one know what this might be?
Ive check the power settings and I have ticked the auto turn off after a ... minutes not used :S
So hope some one can help me out cause it drains my poor battery
sounds like a software issue, perhaps someone here knows the correct registry settings applicable to powersaving
I hope some one knows Cause I thought there were more folks that are looking for this
is it plug in for recharging? if yes, it's normal, during rechargind, it dimms out after 30 mins or so (please check both options, to dim out after 1-2 mins.)
Nope just normal use, so I sure hope some one knows the right registry setting to it
When plugged in USB and sync with PC, the Touch HD stays on with dimmed backlight. No matter how long the settings to turn off the backlight, the backlight still keep on its minimum level.
This is totally different with my Hermes, which the backlight can turn completely off after some time.
ahlok_hk said:
When plugged in USB and sync with PC, the Touch HD stays on with dimmed backlight. No matter how long the settings to turn off the backlight, the backlight still keep on its minimum level.
This is totally different with my Hermes, which the backlight can turn completely off after some time.
Click to expand...
Click to collapse
I noticed that happens even when using a bluetooth to sync. No matter cable or not, connected activesync keeps light on.
Arrggh? Does no one know the right registry key value to it ? its quit annoying
*bump*
Really no one knows anything about this
same problem for me
I use LumOS, are you using it too ?
I removed LumOS, and everything is good now
Do you have MobileMagic installed?
I did and it had 'Stay On' activated in its settings which meant it always stayed on!
Might be the case here too!
koxx said:
I removed LumOS, and everything is good now
Click to expand...
Click to collapse
Even if my HD has no LumOS or Mobile Magic (from hard reset), the problem (backlight stays on during USB sync) still exist.
P.S. My previous X1 has the same behaviour...
koxx said:
I removed LumOS, and everything is good now
Click to expand...
Click to collapse
Well I had it installed but I removed it later one cause I didnt liked it too much
But the problem still occurs so there most be a registry value that didnt change with the install :\ or something
I've looked up some registry value's but really dont know which one i've have to edit
or if I even have looked up the right one
BatteryTimeOut 30
BatteryTimeoutTemp 0
BatteryTimeoutUnchecked 0
Maybe some one that still has the function that the screen goes black after a while.
Can look up the registry value's ? here is the path I dont know if i'm looking at the right point:
HKCU\\ControlPanel\Backlight
Maybe some one is kind enough to list all of there value in this map ?
PS:
My problem is that my blacklight doesnt go fully to black and that's when using it normal. Not connected to anything or something .
It usualy goes to black after a XX amount of time. but that doesnt happen any more :\
Dang no one is offering his self up too look up those registery valves
Guys, the fix is simple. You must have turned on the Autolock feature using HD Tweak or Advanced Config.
If yes, just turn it off.
I have got the autolock function on, did it via HDtweak
Havent check it via Advanced config.
But I dont know what you mean with the last sentence?
Should I turn it on or off?
Edit:
Well dang you were right, i've turned off the autolock function.
And now the display does go to black.
But I find it strange that it worked nicely a few weeks ago and now the problem occurs
so any idea?
*bump*
still no one has found the solution?
wrong reply
I already posted in the sticky but didn't get any answer.
My problem is one that occurs quite often how I see but still I don't find any solution.
The problem is that the screen of my HD doesn't show up anymore when it was in standby and I left it for some minutes. It's on because I can still change the loudness and I can feel the buzz of the buttons when touching one. It takes me some luck and time to bring it completly to life again by pressing over and over the ON/OFF button. When I bought it the problem occured very rare but now it's happening all the time when it is in standby.
I never did install any roms (because until now I have no idea what it is about ), the only things I have done so far:
Installed TomTom 7.450.9028 and these two registry edits:
under HKLM\Software\Microsoft\Inbox\Svc\POP3 i renamed the mailtrns.dll to mailtrns2.dll (it's a fix for the email because my GMX account didn't work with POP3 on my phone) and the other was setting the value HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/GPSIntermediateDriver/Drivers/GPSOneDevice/PollIntervall, to get better GPS-Signal
Everything else is just original, like it was when I bought it some days ago.
Is there anything I can do? Or do I have to send it in?
I really like the phone and it's working perfect except to this point so I'd like to stick to it. Hope you have some advice,
THX in advance,
-db-
-db- said:
I already posted in the sticky but didn't get any answer.
My problem is one that occurs quite often how I see but still I don't find any solution.
The problem is that the screen of my HD doesn't show up anymore when it was in standby and I left it for some minutes. It's on because I can still change the loudness and I can feel the buzz of the buttons when touching one. It takes me some luck and time to bring it completly to life again by pressing over and over the ON/OFF button. When I bought it the problem occured very rare but now it's happening all the time when it is in standby.
I never did install any roms (because until now I have no idea what it is about ), the only things I have done so far:
Installed TomTom 7.450.9028 and these two registry edits:
under HKLM\Software\Microsoft\Inbox\Svc\POP3 i renamed the mailtrns.dll to mailtrns2.dll (it's a fix for the email because my GMX account didn't work with POP3 on my phone) and the other was setting the value HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/GPSIntermediateDriver/Drivers/GPSOneDevice/PollIntervall, to get better GPS-Signal
Everything else is just original, like it was when I bought it some days ago.
Is there anything I can do? Or do I have to send it in?
I really like the phone and it's working perfect except to this point so I'd like to stick to it. Hope you have some advice,
THX in advance,
-db-
Click to expand...
Click to collapse
Have you tried going to Start > Settings > All Settings > System > Power > Advanced and making sure device isn't set to turn off after a period of time?
Thx for reply but doesn't that mean my phone will be always on? Or can I set it then manually (by pressing ON/OFF) in standby and turn on again without problems?
-db- said:
Thx for reply but doesn't that mean my phone will be always on? Or can I set it then manually (by pressing ON/OFF) in standby and turn on again without problems?
Click to expand...
Click to collapse
Yes to both, it will remain on unless you manually put it into standby by pressing on/off
Ok, I try it out now. Hope it works that it comes on out of standby without problems.
Wow until now for exactly 1 hour and 33 minutes no problems. Seems to work, hope it will continue like this, if so I could kiss you
THX
-db- said:
if so I could kiss you
THX
Click to expand...
Click to collapse
Could be difficult (grin).
Hi everyone
I have a strange problem since a couple of days. If turn my HD2 off (standby) the wifi connection remains alive. This naturally is a massive battery drain and the only thing I can do, is to manually turn it of whenever I don't need it. Does anyone have a solution for this problem.
After this problem appeared I thought I might have accidentally turned on the WiFi Standby tweak in BsB Tweaks. It appears turnoff in BsB Tweaks. So I thought I might try turning it on an then off again to clean up the registry, but I don't seem to be able to turn it on so it sticks. I'm thinking maybe BsB Tweaks isn't actually showing whether it's turned on or not. Does anyone know the reg-key concerned, so I can check manually whether it's turned on.
Thanks for your help
Greetings
chuelibrueder
I have exactly the same problem. Have you found a solution?
I had this problem today where it constantly kept trying to connect and my battery went from 73% to 4% within a few hours, even though i selected cancel.
do you have bsbtweaks installed? there is a tweak in there that lets wifi stay on when on standby, perhaps that is active?
this is not issue this is normal , as they make the end key closes the screen they should have stretched the wifi turn off time after standby so wait from 2-3 minuites after going to stand by and you will find it closed automatically
hoss_n2 said:
this is not issue this is normal , as they make the end key closes the screen they should have stretched the wifi turn off time after standby so wait from 2-3 minuites after going to stand by and you will find it closed automatically
Click to expand...
Click to collapse
it was doing exactly how you say before, but it now never disconnects. I keep forgetting to turn it off and it's such a battery killer. "keep wifi connection in standby" is not active under BSB Tweaks by the way.
samsamuel said:
do you have bsbtweaks installed? there is a tweak in there that lets wifi stay on when on standby, perhaps that is active?
Click to expand...
Click to collapse
BSB Tweaks, my wifi in standby option is also off so no real solution yet
Ding...has anyone got a solution for this yet?
chuelibrueder said:
Hi everyone
I have a strange problem since a couple of days. If turn my HD2 off (standby) the wifi connection remains alive. This naturally is a massive battery drain and the only thing I can do, is to manually turn it of whenever I don't need it. Does anyone have a solution for this problem.
After this problem appeared I thought I might have accidentally turned on the WiFi Standby tweak in BsB Tweaks. It appears turnoff in BsB Tweaks. So I thought I might try turning it on an then off again to clean up the registry, but I don't seem to be able to turn it on so it sticks. I'm thinking maybe BsB Tweaks isn't actually showing whether it's turned on or not. Does anyone know the reg-key concerned, so I can check manually whether it's turned on.
Thanks for your help
Greetings
chuelibrueder
Click to expand...
Click to collapse
Check this registry value...
HKLM\Comm\BCMSDDHD1\Parms:HTCKeepWifiOnWhenUnattended
It should be 0 to turn off wifi when in standby.
Hope this helps
Edit:
Ignore the space in "HTCKeepWifiOnWhenUnattended" above. It's this forum - it's always doing that
I've found this:
HKLM\Comm\BCMSDDHD1\Parms:SuspendOffDelayInterval
I've set it from default 30000(30 seconds) to 5000 (5 seconds) and WiFi does restart when I power-on after 5 seconds.
NuShrike said:
I've found this:
HKLM\Comm\BCMSDDHD1\Parms:SuspendOffDelayInterval
I've set it from default 30000(30 seconds) to 5000 (5 seconds) and WiFi does restart when I power-on after 5 seconds.
Click to expand...
Click to collapse
that didn't help me, still stays connected in standby.
This thread is interesting. I, on the other hand, would like to keep wifi ON while in standby (with screen off). For certain programs such as Pandora, I would like it playing in the background but have my screen off.
I am having the opposite issue. I can't seem to make it do that given the tips I found already on this thread.
I tried changing the following from 0 to 1 but noticed that when I poweroff phone, it goes back to being 0. Can anyone help me out? Sorry I don't mean to take over your thread. Maybe I should start a new similar thread with an opposite meaning..
HTCKeepWifiOnWhenUnattended
My nexus4 cannot automatically lock the screen anymore, The setting is that it should turn off the screen after 1 minutes, but the screen just keep on light all the time, the only way is pressing the power button manually.
The ROM version is 4.2.1. Do anyone have the some issue? How to resolve it? Thanks a lot.
Mine locks after a given time. Try rebooting and report if it changed something maybe... Or try changing the screen off time (for ex. try 15 seconds).
rabbit140 said:
Mine locks after a given time. Try rebooting and report if it changed something maybe... Or try changing the screen off time (for ex. try 15 seconds).
Click to expand...
Click to collapse
Change given time does not work , after reboot it is OK, The question is it will not lock automatically after a few time use.
Really strange....
Is your phone rooted?
rabbit140 said:
Is your phone rooted?
Click to expand...
Click to collapse
No, after deleted some apps, it works OK in the last two days. May have some relationship with the apps.
I will keep watching...