Software/Hardware Problem after Trinity felt down - P3600 General

Hello!
I have a problem with my trinity.
It felt down (1m on a carpet) and after that it's not workung any more. When I press the Power-Button the Display gets dark but the backlight is working. But there is no action on the screen and the green light for connectivity is blinking every 3 seconds.
But when I press the reset-Pin (for softreset) quite hard, the phone is booting and working as long I press the reset-Pin. If I release the reset-Pin, many stripes all over the display and the phone isn't working any more.
What the hell goes on there???
I've tried to connect the phone via USB, but my Notebook didn't accept the phone in normal mode (without pressing the reset).
Is there any possibility to back up my data?
With pressing the reset and PIMBackup I could only save appointments, calls and contacts. But there are some important messages... When I try to backup messages there is no action...
It it possible to make a complete dump of the existing data (files and messages etc) and load it to an other Trinity or any other solution for backup the messages?
Running German Win6.1
Best regards,
S. Reichelt

Related

JAM does not turn off after being turned off

If I check in "Settings-System-Power-Advanced-On battery power" to turn my JAM off if it is not used for some time (e.g. 3 minutes), it goes off and then I can not turn it on. I tried to push/hold power button, nothing helped but soft reset. If I turn my JAM off manually by pushing power button I can turn it back on manually too. But after 3 or 4 times it acts just like it was turned off automatically, i.e. iregardless if I push or hold power or any button, LED flashes green and the phone does not turn on. The worst part of it is after I push Power button trying to turn my JAM on and LED indicator starts flashing green (and JAM still remains off) if somebody tries to call me he hears the signal as if my phone is ringing (not busy signal or "The number you dial is not available right now" etc.)
Does anybody know what the problem can be? I've got this problem even after hard reset with no third-party applications installed.
non functioning of on/off switch
Check the connectors of your battery on the inside of the JAM. I had the same problem and I found out that one of the connectors did not really "touch" the battery.
I checked it. The contacts on the battery look like they were scratched by contacts on the phone, so I'd think the connectors are in good contact. I even tried to put a small piece of paper between the battery and phone bodyon the left side to make sure it is really pushed to another side, it did not help either
JAM does not turn on after being turned off
Did anyone ever find out the answer to this??! I have the same problem with mine except it's a bit random - mostly doesn't turn back on again after an auto power off for a long(ish) period of time - like at night.
sounds like a possible fault is occurring. Best thing is to do a full backup of your system and then do a hard reset your device and see if the same thing is still happening. If it is, try the positioning of battery as suggested in earlier posts and if still happening, then a handheld service is required

3600i start menu & green call button don't work after a call

Hi All,
I've found a strange little problem with my new HTC 3600i, for a little while (1 or 2 minutes) after a call my start menu doesn't work (no matter if i select from the windows button or clicking the screen via stylus). I've also noted that the Green call button also doesn't work.
This doesn't happy 100% of the time, but often enough to be annoying.
Any suggestions?
TIA

phone blanks on rom 1.19 WWE

I am on rom 1.19 WWE
Whenever I start a phone call, the screen blanks (becomes black) but the phone call can continue. I have to press the power button twice to "resuscitate" my device.
Is this normal? If not are there any steps to solve it?
Of course I set the power settings to keep the device ON at least for 5 minutes both on batteries and on charger.
Backlight question:
I cannot see the backlight settings, which in my former device (kaiser) where under power settings area. Is this normal?
Thanks and waiting
Saulo866
it's normal. with the screen blacked-out (off) you won't accidentally launch a program
dear Cortez
Thanks for your message
1.
But why this (screen blanking) never happened on my former Kaiser, Athena, Dopod, Tytn, etc?
2.
Is it possible to cancel this function? In fact I wish to monitor the call details, timing, or even do some other actions, while calling, like activate conference mode, etc.
How to disable this so-called "proximity-feature" ?
Thanks
Saulo866
Ehm push the on/off button. There is also a tweak for it. Use search or read the topics here
http://montecristoff.webs.com/hdtweak.htm

Power status light?

I'm getting an xperia, I used to have a tytn II and now have a touch pro.
When I moved from the TYTN II to the touch pro I really missed having hardware keys and the LED blinking whenever the phone was on.
I could only tell if the phone was on by pressing the power button on the touch pro, which meant on a night when I wanted to switch off the phone I end up pressing the button, only to see the phone was already off then have to wait for the phone to start only shut it down.
Can you make the light flash every so often when it's on on an X1? If not is there a way to tell if it's on or off (without turning it on if it's off)?
- Anthony
you could briefly press the power key to see if the screen immediately lights up, if not then it is off
or you could allow waking up the phone with any hardware key and click one of the other keys to see if it's on
I'm sure, with all of the apps and mods on here, there is a way to make your lights blink every so often as well
however, I've noticed the lights aren't very bright, even at night time
You can slide it open to check if it is on
OMG I've been going nuts over this, I didn't think about sliding the keyboard out!
The any key wake is an even better option, thanks.
I'd still like to get the LEDS lit though, as I used to remeber to switch off the TYTN II when it lit up after I turned off the (ceiling) lights.
Thanks for the help
- Anthony
A workaround:
Set SMS or Mail notification lights to "unlimited"
Send yourself a SMS or Mail and keep that one "unread", then you have your Xperia blinking as long as its turned on.

Text sms messages problem

Dear all,
Since long time i have an issue with my text sms. Eg. When I send text SMS to any Group (Consist of 10 People) in my X1 the (Receiver) receives more than 5-10 same SMS text messages. This really causes big issue for me in my phone bills & I am still not able to resolve this issue.
I have soft reset many times my X1 with new ROM ( X1i_GENERIC_UK_CDF1215-1832_R2AA010 – uploaded and still it remains the same; this ROM caused my camera not to work . This is really annoying me. I haven’t changed any sms settings either, but I asked people in that thread, and no one there knows either.
My phone also x1 when I keep it long time in the charged the phone screen gets stuck & I am not able to do anything except removing my battery
Please anyone advice me with the solution. Because I really heated X1 since I bought & all this issues are coming
Please anyone advice me with the solution. Because I really heated X1 since I bought & all this issues are coming
Try Hard Resetting your phone.
Take battery cover off & stylus out of phone.
Try powering up your phone into bootloader mode (power button & volume down).
Then when in that screen Hold both soft keys down & press the reset button with the stylus. Flip the phone over to reveal the dialogue & then press the r button on the keyboard to reset the phone.
Warning, this will wipe everything off your phone, except the rom !

Categories

Resources