Hi
I have been trying to use my XDA II as a modem and every time I try it give me a error. Error 692 Hardware Failure..
Can anyone pleasr help me with this?
I have a similar problem, please help!
I stopped trying via IRDA and set it up via the USB Sync cable, using GPRS. Works like a charm.
I was going cross-eyed trying to make it work and it wouldn't. Took about 15 minutes with the cable.
Is not working with the USB cable either
I had followed the instruction on PPC website (which seems identical to those on the XDA II official website):
http://www.ppcw.net/?itemid=1656&catid=80
but no luck... I'm still getting an error message... usually 732,
have you done anything different?
Please help Thx,
Chris
Did you successfully install the HTC USB Modem?
Was ActiveSync closed down, as it must be?
Did you use the USB Dialler program to make the connection?
Did it show the HTC USB Modem?
Was GPRS connected on the XDA?
Did you enter the correct User ID and Password?
A friend of mine tells me they're not necessary, as it works off your IMEI code, I've never tried it without them.
Dear ardarby,
Thank you for your help... here are my answers.
Did you successfully install the HTC USB Modem?
Yes
Was ActiveSync closed down, as it must be?
More than that: I disable USB a mean for active Sync to connect to the device, both on the PC and on the PPC
Did you use the USB Dialler program to make the connection?
Yes
Did it show the HTC USB Modem?
Yes
Was GPRS connected on the XDA?
I think so... how do I see it
Did you enter the correct User ID and Password?
Yes
A friend of mine tells me they're not necessary, as it works off your IMEI code, I've never tried it without them.
I am now getting an error which is something like error 734... any clue?
Thanks,
Chris
www.GB-SOFT.cz/XDAII
this tool should be able to tell you
I would like to ask,how can I connect to AS via BT,when I tap to Tools>Connect via BT... it ignores me. It does absolutely nothing. While attempting to connect via IrDA,it starts to connecting. The same thing should do also BT. Once,maybe 1 month ago it worked fine. Since one week ago,when I've changed the Radio stack I couldn't connect. Before was all allright. Any Ideas? Please.
hey bro
since ur running magneto on ur himalaya,it should be easy...
broadcom bluetouth stack ufortunatlydon't run on magneto ,but still M$ blutouth one will synchronize...
now u have to do the following:
1-uninstall every bluetooth software from ur pc(if u have intalled the ones that comes in the cd),restart,put bluetouth into usb,and let winxp sp2 identifies it(remember,only win xp drivers,no softwares).
2-go to control pannel in ur pc/bluetouth devices/com ports,and see wich com port ur blutouth is using,then from the options tab,select the turn discovery on.
3-go to active synchronization 4.0/file/connection settings,disselect allow USB connections,select allow connections to one of the following:,and put the com port u already checked in 2,and put automatic in the window below.u may need to restart ur pc.
4-now,pair ur pc and ur himalaya,u must see that ur PC supports active synchronization,then select/check it.(if u do not see,from ur himalaya,once paired,that ur pc supports active sync and checked it,u will not be able to sync).note that u may also need to restart ur pocket PC.
5-finally,go to ur pocket PC/active synchronization/connect via bluetouth,the port will open....ur now connected. :wink:
oh by hte way,the same procedures work if u have 2003se with bluetouth stack by widcom,just don't open active sync on ur himalaya before going to bt stack/bluetouth manger(that's the blue blutouth icon with red star in the buttom of ur screen)/active sync via blutouth(i guess,i don't have SE anymore),u will see ur PC with active sync option,then just synchronize :wink:
hope i've helped..
RAGO :lol:
...
Well... All I have with my BT stack at the PC's side is correct. At the PPC side it is also correct adjusted. Now,in the 5th step you wrote:
'...go to ur pocket PC/active synchronization/connect via bluetouth,the port will open....'.
This is the problem: It should open the port,BUT it does absolutely nothing... Just the 'Tools' roll-up menu is disappeared. While trying to connect via IrDA,the port starts to connecting. BUT Bluetooth doesn't it. Why?
hi
have u tried hard reset,if u have and the problem persists,try flashing.....the procedures should work unless there's some kind of problem in ur device(most probably software issue),it should be solved with a hard reset or in the worst a flash...
tell me the news,my friend...i wish i could have helped
RAGO :lol:
...
As I wrote in my 1st post:I have reflashed he Radio stack and therefore I have performed a hard-reset. The ROM Image is the same as before when it worked. Don't thing,that the Radio stack is the reason why...
all i can tell u my friend is i was using 2.06 WWE with Radio 1.18 on my MDA2,and my active sync over bluetouth worked like a charm.....
try changing the radio version(though u didn't mention wich version u're using)...
good luck
...
ROM:2.06(Diamond)
Radio:1.18
Well...The Radio version is 1.18,but I have 2 different versions..1st is in the package of Diamond ROM 1.2 and the 2nd one is from the package 2.20CHS Translated. The Chinese is much faster! even they are the same versions.
when i get home,i'm gonna reflash my MDAII,with 2.06(am running on magneto :wink: ),i'm gonna try everything,and tell u what's happening in details :wink: ...
so...later bro :wink:
RAGO :lol:
????????????
Well!!!!! You are bored at home? It takes a long time after all... Or do you have MDA2 only for experiments? Wau. Allright,as you wish. I will be grateful. If you have a choice,then flash-in the same images as me(ROM 2.06 and Radio from 2.20CHS). Thanx.
Can anyone here!!!!!?
Can anyonew explain how to active sync via BT in XDA2s having a Widcom stack and XP with service pack2..... :roll: :roll:
RAGOv said:
hey bro
since ur running magneto on ur himalaya,it should be easy...
broadcom bluetouth stack ufortunatlydon't run on magneto ,but still M$ blutouth one will synchronize...
now u have to do the following:
1-uninstall every bluetooth software from ur pc(if u have intalled the ones that comes in the cd),restart,put bluetouth into usb,and let winxp sp2 identifies it(remember,only win xp drivers,no softwares).
2-go to control pannel in ur pc/bluetouth devices/com ports,and see wich com port ur blutouth is using,then from the options tab,select the turn discovery on.
3-go to active synchronization 4.0/file/connection settings,disselect allow USB connections,select allow connections to one of the following:,and put the com port u already checked in 2,and put automatic in the window below.u may need to restart ur pc.
4-now,pair ur pc and ur himalaya,u must see that ur PC supports active synchronization,then select/check it.(if u do not see,from ur himalaya,once paired,that ur pc supports active sync and checked it,u will not be able to sync).note that u may also need to restart ur pocket PC.
5-finally,go to ur pocket PC/active synchronization/connect via bluetouth,the port will open....ur now connected. :wink:
oh by hte way,the same procedures work if u have 2003se with bluetouth stack by widcom,just don't open active sync on ur himalaya before going to bt stack/bluetouth manger(that's the blue blutouth icon with red star in the buttom of ur screen)/active sync via blutouth(i guess,i don't have SE anymore),u will see ur PC with active sync option,then just synchronize :wink:
hope i've helped..
RAGO :lol:
Click to expand...
Click to collapse
I have xda II and activesync 4.0 installed in my machine.
I am not able to find my bluetooth serial port in activesync connection.
actually by installing and uninstalling bluetooth software many time. My ports are com 25 and com 26. I just come to know from activesync help that it will not support if port no. is higher than 20.
so can anybody please help me how to create new port which is with less no. below 20.
:?:
Hi Man i have Your same problem with i-mate Jam iam realy need a solve
If You reach it please told Us Thank Youuuuuuuu
Solution
I've found that...
@PC: You need to create an BT serial port in your services(COMx). Then go to the connection settings in AS and check the "Allow connection to one of the following:" option and choose this COMx.
@PPC: Pair your device with PC. You should see the AS service in a list of services of your PC. Enable this option and tap Finish.
Now you should be able to connect via BT.
I got the new SPV 5000 as upgrade on orange and the first thing i did was unlock it using the bootloader by BUZZ from this site. Once i unlocked the phone, it works fine, everything is great. But when i try to connect it to the PC, it gives me an error, saying download Active sync 4.1 for it, I downloaded the latest 4.2 and tried to connect my universal to it, but it isnt able to connect, i dont know why..
sometimes it just gives me an error and says, check/report error and does all the status reports and stuff, but still not luck. I connected once and then when i clicked the explore button everything was blank, cant see my device or folders and nothing at all.
Please help me if someone knows the solution to it.. Cheers
Do you have another PC with which to try it out? Maybe the activesync installation or the USB drivers got corrupt.
Also, try syncing thru Bluetooth if your PC has BT. This might isolate the problem.
hello Jorgee, thanks for the reply, Yes it did work on the other PC, so does it mean that my current Pc's USB drivers are corrupt, coz the other day my USB TV stopped working on this one too. hehehe.. any solution to this PC problem
cheers mate
I find that if I'm connected to work using the Cisco VPN Client then ActiveSync won't connect, not really a big deal I guess but annoying all the same!
Are there anybody can help me.
I Have a VX6700 and the bluetooth can't accept any file or send any file
Help me with this problem...
Thx for all
install bluetooth hermes
u can istall bluetooth hermes, its a2dp, but cannot connect internet,okay
guys...i got provider wich is using mac adress protection...and PPPOOE protocol...which meens that i dont have it on my pocket PC (i guess) and i cant conect directly with my pocket and i cant conect when i put my pocket on USB too...any solution guys? any program wich is help to do that or any experience?
im using WM6 last one ty to our developers here.
ty in advance
ps. sry on bad english too
when connected to activesync using usb or bluetooth the pda have the network connection of the pc unless you turend it off