who can tell me how to make S12HT work with GSM network?
Thanks a lot.
Do you have any results in connecting to GSM network or maybe you found S12HT original ROM?
1.7Ghz W-CDMA only!!!!!
Japanese website says S12HT is 1.7Ghz W-CDMA only!!!!!
Related
Hi, I have a T-Mobile MDA with the T-Mobile Rom 4.00.10 ENG in Austria/Europe. Radio Version 4.21.00 of O2 Germany. And use a network operator in Austria (Telering) operating on 1800 MHz.
Here is what happened. Everything was perfectly fine, until I did all the "official updates" of T-Mobile (OS+radio) which wrecked my MDA. After really getting into the subject and 5 cooked roms at jeffs kitchen and SD bios replacements, I finally got the thing working again. I am using the combination in the first line (o2 + Tmobile) which "kind of" works fine. Here is the deal: Using operator A1 (900MHZ) everything is perfectly fine. Using Telering (1800MHZ) everything seems fine for about 30 minutes, then the signal indicator still says there is a connection, the green light blinks, BUT if you make a call it fails with not available, or if someone phones me he gets to the voicemail. Interestingly I figured out that under PHONE/BAND options only 900/1900 is available, while non is selected. THE ROM I USED IS the T-Mobile GERMANY rom. I also used the band selector method in the bootloader to select 1800 MHZ which i need. It is obvious that the system operates on that band, as I do have a connection, but it drops it. Any ideas? Thanks a million guys, Matt
Interesting Problem - 900/1800 and 1900 Band in Europe
Found out some more... The official T-Mobile update on the Tmobile website in Germany actually includes TWO different nbf files. It checks what you have installed. Number one is a English 4.x version Number two is a german 3.16.45 version.
Again, I still encounter the problem on 1800 MHz, any ideas? :shock:
Solved
:lol:
hi, as it seems, using the original german 3.x bios of their germany website (not the english nbf which is also included in the file) also the 1800 MHz band works perfectly fine. No matter which 4.x version I use I encounter the problem (e.g. from the german O2 website, Jeffs Kitchen and so on). It does not seem to be a radio problem (now I use the latest of the german o2 website) but the interaction with the main OS. So no 4.x version for me here in Austria on 1800Mhz. If anyone ever solves this issue or has a MDA on 1800 Mhz running with a 4.x OS please let me know via PM. Thanks everyone. Logging off. M
where did you get the phone from ?
T-mobile USA or T-mobile Germany ?
T-mibile USA Pocket PC phone is GSM 900/1900 phone, so you cannot work on GSM 1800!
Hi, it was a mobile of TMOBILE GERMANY. And as such a 900/1800MHz phone. So this is why it actually works on the 1800Mhz band. Havind said that with the German T-Mobile Rom of the german website using the SECOND NBF, which is in english, you get a rom which seems to be for the US, as it is a version 4.x (not for resale, test only) and showing 900/1900 Mhz in the band options....
Strange though that this flash is offered to the European customers, cause if you have a english rom underneath it will automatically install this english version.
Anyway, I switched to the german version using bootloader and everthing is fine now. Still use the O2 radio stack.
:lol:
USA At&t is PW10A and work on 1800Mhz
I bought a Sx56 as aAt&t unlocked phone, now I need to change it to bandwidth 1800Mhz that we use in Brazil. I read in this forum model PW10A works in 900/1800mhz I think I just need to use the right BIOS, anyone here knows what bios I should use? Thanks.
I cooked a ROM kitchen version of WM2003 back in November 2003.
I have ROM 4.00.11eng and Radio 6.18.00
Before I upgraded, my device automatically selected the correct band 900 or 1900 when I travelled throughout Asia.
On this recent trip, the first since the upgrade, the phone didn't autoselect.
I had to go in to bootloader and manually select 900 mhz. There was a choice for 900/1800 as one selection, but not 900/1900?
What I didn't know, and I want to warn everyone is that this HARD RESET my device. I had an SD backup so was okay. I then had to do a bootloader selection for 1900mhz when returning to the US.
My question is, isn't the ROM supposed to auto select bands? If not, does the newest version of WM2003 ROM autoselect bands?
I think T-mobile ROMs doesn't do this auto selection and that's why it has this "band" tab in the phone settings.
A30.09 doesn't have this tab, so I assume it does this auto selection but assuming as well that you have their RSU as well.
I tried A30.09 ROM with T6.24.01 RSU and it gave me 900 MHz without the need to go to the GSM band switching (my network is 900/1800), but I didn't try travelling to US to see whether it will auto switch or not.
my info
rom v 4.01.16 eng
radio v 6.24.00
protocal v 324e4
my problem is i live in eygpt the phone search for a network and nothing
no locks i dowengrade to spical rom 1.2 no signal i upgrade again in egypt
we work 900 band and this is booked in the phone when i search in manual mode he make for me empty box to chose a network how i can add a config for my network any help
thanks all
moga
I seem to remember being able to access different GSM bands in the bootloader. Perhaps trying that will work? Details about the various GSM bands available and how to get into the Wallaby's bootloader are elsewhere in this forum. Also, depending on the version you have; PW10A or PW10B, different GSM bands are supported so you may be in a situation where you're unable to use your Wallaby in your country because of a hardware limitation, to which there is no solution. AFAIK, one supports 900/1800 (PW10A) and the other supports 900/1900 (PW10B)
Regards,
Neil.
thank you for replay
i tried all
what i am thinking if we can add config for the network or what do you think
i change form pw10b1 to pw10a1 and again to pw10b1 do you think as
in most of phone there is a file of tune like pmm in nokia without this file the phone will not got a signal
thanks
moga
if you have an american model it should work with 900/1900
and if you have a non american model it should work with 900/1800
so it should work with 900 no matter what
it's all in the radio stack but
a radiostack CANT! change it it's hardwired in the gsm module
but a gsm module can get confused and stop working if a radio stack for US is put on a non US device and the other way around
look into which device it is you have and put the right radio stack on it if it will let you
have u find radio version works fine with egypt ? please help
i am working on radio 3.23 but signal is weak and when iam in low coverage signal lost and its does come back until i turn off and on network again
Hi All,
After the original contract with the carrier expired, I have unlocked my Qtek A9100 G4 with the IPL 2.21.0001 / SPL 2.21.olip, and was able to install an newer OS (WM6 Pro vs. the WM5 AKU2 that came originally).
Works fine with the original movistar chip, however when I try put in an Claro chip from one of my data cards, the Qtek opens the "SIM Lock" program and sends the following message: "Network is locked. Please input unlock code."
I have introduced the PIN of the Claro chip (movistar opens without asking for anything) but that's not the information it asks. The Claro chip works fine in the Huawei E226 USB card, without asking for anything.
I would like to discuss what information is being requested. Should I make additional unlock procedures? Who should provide the code? Claro or movistar.
Movistar operates locally in the cellular band (850 MHz), Claro operates PCS (1900 MHz). I'm in Peru. The movistar chip is an 128 kb version, the Claro is an 64 kb chip.
Thanks in advance for any information.
The Loco.
PS.
I ran the lokiwiz program, which showed the code.
http://forum.xda-developers.com/showthread.php?t=265928
just see my signature and use inbuilt search,
regards
irm
Thanks 4irm,
I have unlocked the phone already. The issue now is the data configuration:
- The local operators express their configuration with both: the number *99# (apparently it's the same number for movistar and claro) and the Access Point Name / APN (which is movistar.pe or claro.pe respectively).
- The network wizard doesn't include the information for Peru.
- When I set a new connection, it asks for the number, but it doesn't allow to introduce the APN anywhere.
So far, I'm using the Network Wizard choosing Spain as the country and operator movistar, which auto-configures the device and later allows to introduce the APN (but not the number) and in that way the data connection works for both movistar and Claro.
However, I'm wondering what number is being called and if there is a better way to do this. I would appreciate any information about how to configure both, the number and the APN for the data connection.
Best Regards,
The Loco.
htc hd2 leo
need network unlock code jamaica
Deer friends,
I need your help.
last weehk I changes my operator in israel from ornage to pelephone.
The hermes does not recognise the new operator network, and i cano not use the phone.
I tried several roms including shaps 4.31. manila and some others.
Yet, i can not use the phone. It does not find any available network.
pelephone network is a UMTS network ( as far as I know).
it is obvious that my hermes is sim unloacked.
Pleas any one familiar with pelephone network and hermes setting,
I need help
regards
radio upgrade
Hello friend
try going to phone>menu>options>band>them switch the band to the hrtz that your new carrier operates
if it dosen´t work try to upgrade you rom , for radio upgrade guide go to xdawiki on the main xda page