Database Users

Something strange..for me. after herald HardSPL

I was trying to hardspl my Herald, but i received an error abot comunicating with device and i have pressed finish.
After that i saw a message on the screen of the phone if i allow an application to be installed. i pressed yes. since that moment my Herlad doesn't pass bootloader.
Today i saw something strange:
-with the main battery attached in bootloader i see a messsage in the right corner saying "RUU".
-without the battery the phone starts in bootloader but there is no message in the right corner.
If i use mtty.exe and input the password i receive the following text
-----------------------
password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
------------------------------------
I don't know what RUURUN fail means...
i tried to flash the WM 5 and WM 6 spanish ROM from HTC website but i receive the same error : 300 invalid update tool.
What tools can i use to see if something is going wrong and what..
Thanks in advance!
i saw that the command set 32 is not functioning well, i receive error, and when i use the commands ruurun 0 an ResetDevice the phone shuts down and does not start.

Did you have an SPL of at least 4.0.x.x before you began?
Either way... not a good thing...
I'm not an expert on this, though, so I'll let other people answer.

????
does it still have a bootloader screen?.....if so try a different SPL....see if that works

ivanmmj said:
Did you have an SPL of at least 4.0.x.x before you began?
Either way... not a good thing...
I'm not an expert on this, though, so I'll let other people answer.
Click to expand...
Click to collapse
i had the exact ipl/spl that was shown after the upgrade, nothing changed 1.08.0001
How do i must change the SPL ? even with the ROM from HTC website i receive the error 300. invalid update tool.
i think something was changed in Bootloader but don't know what.
I need an advice from someone with better experience with Herald.
I saw that hardSPL from olipro uses JumpSPL, enablerapi.exe, and the image to be flashed.
When i ran the setup i didn't accepted the use of enablerapi or jumpspl so the flash finished before starting and gave me an error that it cannot communicate with the device.
So AFTER i received this message and so the flash process ended without even beginning to flash i assume that i have installed only jumpspl.exe or enablerapi.exe. i don't know for which one the message was because the language was spanish and i don't understand wery well.
so the effect of softspl how can be removed??? i know it loads a custom spl in ram but .......that's where my knowlege ends....

The HardSPL bricks devices with low SPLs. I'm sorry. I could be wrong, I'm not an expert in the field.

yes, now i know that. only that olipro does not write anything about that in his first post, not even now when there are a lot of people who had the problem.
but there is something strange with hardspl.... don't know what modifications is making and why not all of them...

It has to do with the IPL\SPL you have on the phone already. The patched SPL is only compatible with certain types.

i will go to HTC support. one man there told me it will cost 40 euro...i hope i will return it to life...

laseru said:
i will go to HTC support. one man there told me it will cost 40 euro...i hope i will return it to life...
Click to expand...
Click to collapse
You were warned though.. If you would have red further
you could have know it could happen with lower SPL..
Sorry mate
Ask Olipro in it's thread..?

there are a lot of requests for olipro....
and why read all thread when it is simple to write a warning on first page.
i agree that he is doing hardspl for everyone but i have a feeling that it is a unfinished...and with all the people who failed i think is better to stop sharing hard spl if he is unable to warn people.

XDA Obrit brick?

Hallo to all the Experts here, and sorry for my bad english.
This is my fist posting here, but i read alot.
I bought an O2 XDA from ebay, that stuck in the bootloader.
USB connection works.
If i do an Hardreset it stuck in the O2 screen showing:
IPL 3.04.0001
SPL 3.04.0000
nothing else
MTTY log:
set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>getdevinfo
GetDeviceCID: Error - InitDecoder
HTCSARTE20000Ÿ3áOHTCE
Cmd>
i don`t know if its cid unlocked, but i dont think so, because i can`t flash any roms (original/cooked).
If i flash an original update it began to update till 3% than shutdown the telephone and the programm says invalid Vedor-ID.
i looked into some nbh with an hex-editor but i only find ARTE1000 or ARTE**** but not ARTE2000, could this be the problem?
please help me to find the right Update and i would be grade, if you post links so i can try it
Thanks

My herald in only bootloader mode???! HELP

I was trying to upgrade my herald with this file and oldest:
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
but i give a error:
Error 300
Invalid Update Tool
my ipl is 1.08.0001
mtty information:
Code:
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
Cmd>
now my herald only goto bootmode
what can i do?
please help
thanks very much

pashaa said:
I was trying to upgrade my herald with this file and oldest:
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
but i give a error:
Error 300
Invalid Update Tool
my ipl is 1.08.0001
mtty information:
Code:
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
Cmd>
now my herald only goto bootmode
what can i do?
please help
thanks very much
Click to expand...
Click to collapse
You don't wanna flash if your IPL/SPL is lower than 4. That's your problem.
Hold down the power button to turn off the phone, and then see if it boots back up like normal. Otherwise, there's the "goldcard" and other things you can try, I think, but idk how to do those.

You don't wanna flash if your IPL/SPL is lower than 4. That's your problem.
Hold down the power button to turn off the phone, and then see if it boots back up like normal. Otherwise, there's the "goldcard" and other things you can try, I think, but idk how to do those.
Click to expand...
Click to collapse
can you tell me whats exactly i must to do?
thanks

pashaa said:
can you tell me whats exactly i must to do?
thanks
Click to expand...
Click to collapse
Well, if ur phone won't boot up no matter what, then, you have to look for the Goldcard thread. I've never done it before, so idk how to do it.

ace10134 said:
Well, if ur phone won't boot up no matter what, then, you have to look for the Goldcard thread. I've never done it before, so idk how to do it.
Click to expand...
Click to collapse
Yep, it'll most likely be goldcard for you: http://forum.xda-developers.com/showthread.php?t=417930
Follow what that page says. I can't provide any help with it, since I too am a newb at it, and I haven't had to do it. Hope it goes well!

icant use this file with that command psdread -l
because my device only going to bootloader

pashaa said:
icant use this file with that command psdread -l
because my device only going to bootloader
Click to expand...
Click to collapse
Sorry, but I can't help you. I've never done it so I have no clue how it goes
Maybe someone else will jump in, and help out...

You could try installing HardSPL on your phone, it should work if the phone is in bootloader mode. I think that should upgrade your IPL as well. You may want to take your problem there and ask if a HardSPL can even solve your problem. Don't just flash HardSPL, I think your IPL has to be a certain version first.

hey man
you need to do all this method through a card reader...so find an adapter for sd card and try doing it like so...if it doesn't work try doing it through another windows mobile device...find an adapter from micro sd to the type of card that the device you are using to create the card...i did goldcard method and it works 100%...cheers man ...be sure after goldcard to do hard-spl...

Arte300 only show htc

sir
when i power on my arte 300 show only htc i do the hard reset but same i update with many rom but still same after two pesent error
my phone 3350 spl version spl 3,17.0000 and ipl version 3.17.0001
sir please give me the same version rom
thank you

Hi to you and all member..
i face to this problem after unlock cid..
whats your solution for repair this?
and body have original rom for arte300?

write here yor it SN please,i find your official rom

Hi to you mate..
This is SN number:SZ723FX00585

Sorry,can't find nothing info about you SN. From where is your phone?more info.pls

I provided it from iran...i think correct model is arte30000

this is info of my htc..
HTCSFHTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>getdevinfo
HTCSARTE30000q¨ÿÙHTCE

Download and open SnoppyPro.Then run mtty the commands password and getdevinfo,save your log and open it with tiny hexer,will be find your completley CID.Leave'me know it.thanks and succes.
or contact'me on [email protected]

http://www.mediafire.com/?xoyngg2jczd
download this,first run uspl http://forum.xda-developers.com/showthread.php?t=311403

[Q] Stuck in Tri Colour while Patching HTCP3400i

Hi,
I desperate need some guidance.
I have been following the Step by Step Guide by Mr Krazy for Ugrading P3400i rom. It sad to say Im stuck at step 5 (Use Orefkov Unlocker) after using the Olipro method first.
Now, my phone is at the tri colour with SPL 1.10.Olip displayed and with USB text at the bottom left. Here, I gathered my gene is new as the phone is not booting with patched SPL 1.10.Olip as mentioned in the Guide, that means my phone is with new gene, right?. I then follow exactly as per the Guide to run the Mitty1_42 to install Orefkov Unlocker for new gene. But then I get the following message after command set 32 1:
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Cmd>
I noticed there are some errors command at the end of the above message. Anyway, i try the next stage by typing ls boot.bin at the cmd> prompt and hold down camera button and press enter key on computer but there is no white screen even after some time as suppose to be according to the Guide. Nothing happend at all even in the Mitty screen in my computer.
So basically I'm stuck here. Don't know what to do. Phone is still on tri colour. I have done the following while doing the above steps and don't see what's wrong.
- No SIM loced
- Unchecked the checkbox enable advance network functionally in my phone for active syn.
- Killed the Active Sync named as wcescomm.exe. Im using Window XP so understand that no need to update driver for active syn (Note: I do see the "USB" button in Mitty window and that means up to here everything is OK).
I have gone through the forum but nothing of the similar nature. Will doing hard boot helps? I know my phone is not bricked, so I need desperate advise/help on the next step and I know some expert is kind enough.
tks
PS: I hope this thread will get to Mr Krazy attention as I don't know how to send to his attention.

Sorry, realised this message should not be in this catergory but don't know how to move to the proper catergory.
Need Advise said:
Hi,
I desperate need some guidance.
I have been following the Step by Step Guide by Mr Krazy for Ugrading P3400i rom. It sad to say Im stuck at step 5 (Use Orefkov Unlocker) after using the Olipro method first.
Now, my phone is at the tri colour with SPL 1.10.Olip displayed and with USB text at the bottom left. Here, I gathered my gene is new as the phone is not booting with patched SPL 1.10.Olip as mentioned in the Guide, that means my phone is with new gene, right?. I then follow exactly as per the Guide to run the Mitty1_42 to install Orefkov Unlocker for new gene. But then I get the following message after command set 32 1:
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Cmd>
I noticed there are some errors command at the end of the above message. Anyway, i try the next stage by typing ls boot.bin at the cmd> prompt and hold down camera button and press enter key on computer but there is no white screen even after some time as suppose to be according to the Guide. Nothing happend at all even in the Mitty screen in my computer.
So basically I'm stuck here. Don't know what to do. Phone is still on tri colour. I have done the following while doing the above steps and don't see what's wrong.
- No SIM loced
- Unchecked the checkbox enable advance network functionally in my phone for active syn.
- Killed the Active Sync named as wcescomm.exe. Im using Window XP so understand that no need to update driver for active syn (Note: I do see the "USB" button in Mitty window and that means up to here everything is OK).
I have gone through the forum but nothing of the similar nature. Will doing hard boot helps? I know my phone is not bricked, so I need desperate advise/help on the next step and I know some expert is kind enough.
tks
PS: I hope this thread will get to Mr Krazy attention as I don't know how to send to his attention.
Click to expand...
Click to collapse