Related
HEllo,i think i damaged my touch,and my question is where can i get it repaired in Midlands UK as cheap as possible, where are the HTC services that repair it,i been in my local services and they said they can't repair,please tell me were i should send my HTC to be repaired!!
ms2405 said:
HEllo,i think i damaged my touch,and my question is where can i get it repaired in Midlands UK as cheap as possible, where are the HTC services that repair it,i been in my local services and they said they can't repair,please tell me were i should send my HTC to be repaired!!
Click to expand...
Click to collapse
Why not tell the detailed symptoms here to the experts here before taking it to a repair centre?
perhaps you can find a solution on this great site!
Good luck,
orb3000 said:
Why not tell the detailed symptoms here to the experts here before taking it to a repair centre?
perhaps you can find a solution on this great site!
Good luck,
Click to expand...
Click to collapse
This.
There's a lot of experience here. I've owned an Exec for about half a year and I've learnt so much. Several times I was going to bring it in for repairs but with this forum and my laptop, I did it myself.
Ok, so i tell you how it was,so three months ago i owned my touch and it worked alright for about 2 months, but after that time i read somewhere that i can flash my touch to wm6.1,so i tried to flash it,but when i was unpluging my htc from usb i dropped it on the floor and what i thought something broke inside and it started to hanging on when i tried to use it,so i searched for something that can repair it and what i found was this http://forum.xda-developers.com/showthread.php?t=476152 i followed all the steps and when i tried to disconnect the lcd the flex or something like that broke off from behind lcd and when i tried to fix it with normal tape it doesn't worked maybe i just stick it not correct,i don't have idea and what i think it is that problem because i put the plastic on the processor like what it says above,please help what can it be the problem, and if it is expensive to repair,please!!!
I post you what is my problem but you don't reply me,please reply!!
Hello.
The MicroUSB platform on the main-board of my HTC HD2, is broken. So I can't charge the phone nor transfer files.
I disassembled the phone and I need a new main-board now. The part number is 76H03923-XXM.
Where can I buy this part? I've contacted HTC a week ago, but still no answer.
If anyone have this part for sale, please contact me. Or if anyone have a broken HD2 (maybe broken screen), and wants to sell it then don't hesitate to contact me.
Metoo
mooooooa said:
Hello.
The MicroUSB platform on the main-board of my HTC HD2, is broken. So I can't charge the phone nor transfer files.
I disassembled the phone and I need a new main-board now. The part number is 76H03923-XXM.
Where can I buy this part? I've contacted HTC a week ago, but still no answer.
If anyone have this part for sale, please contact me. Or if anyone have a broken HD2 (maybe broken screen), and wants to sell it then don't hesitate to contact me.
Click to expand...
Click to collapse
Damn so it seams it wasn't only me that happend that. So did i broke my USG port and my phone does not charge. Plus went to the official reparement and they do not want to take responsability for it. They came with the vague excuse of "mainboard defect not covered by the warranty".
They showed me a photo of the board and as they saying my phone has humitty there for not there responsability...
I also wanted to buy a mainboard for my phone but i've searched everywhere and no luck.
Ahmun_Ra said:
Damn so it seams it wasn't only me that happend that. So did i broke my USG port and my phone does not charge. Plus went to the official reparement and they do not want to take responsability for it. They came with the vague excuse of "mainboard defect not covered by the warranty".
They showed me a photo of the board and as they saying my phone has humitty there for not there responsability...
I also wanted to buy a mainboard for my phone but i've searched everywhere and no luck.
Click to expand...
Click to collapse
To begin with, I sent mine for repair too. HTC wont take the responsibility for the phones broken USB port. They only sent me this picture showing the broken USB.
I haven't treated my phone bad, so i was very disagree with their decision. But they only gave me a link to the Danish court of appeal.
- So, what have you done now? Bought a new phone?
It's sad
mooooooa said:
To begin with, I sent mine for repair too. HTC wont take the responsibility for the phones broken USB port. They only sent me this picture showing the broken USB.
I haven't treated my phone bad, so i was very disagree with their decision. But they only gave me a link to the Danish court of appeal.
- So, what have you done now? Bought a new phone?
Click to expand...
Click to collapse
To me they came with the lane excuse of humitity in the board. I see that everything is a good excuse not to take responsability for theye'r crappy materials...
I've always been afraid of something like this happening. That's why as soon as I found out powermat made wireless charging for the HD2 I ordered it. It really sucks for everything to depend on one little port.
You might try this solution for now and just use wifi to transfer files. It makes flashing tough but at least it'll be working, and you can take your time looking for a new board.
http://www.powermat.com/us/powermat-wireless-charging-station-for-htc-hd2.html
Here's a 10% off coupon code too BZPM10
Try: http://www.mpt-pda.com/
Ahmun_Ra said:
To me they came with the lane excuse of humitity in the board. I see that everything is a good excuse not to take responsability for theye'r crappy materials...
Click to expand...
Click to collapse
I got exactly the same answer. "Humility on the board", it would cost me 550$ for HTC to change the Main-board.
buzz killington -->
I already have seen powermat buy can't buy it. I live in Denmark and they don't ship over here...
xmoo -->
Nothing there
--- For now, i ordered this one; http://www.dealextreme.com/details.dx/sku.40593... So i can charge the battery external.
mooooooa said:
I got exactly the same answer. "Humility on the board", it would cost me 550$ for HTC to change the Main-board.
buzz killington -->
I already have seen powermat buy can't buy it. I live in Denmark and they don't ship over here...
xmoo -->
Nothing there
--- For now, i ordered this one; http://www.dealextreme.com/details.dx/sku.40593... So i can charge the battery external.
Click to expand...
Click to collapse
Damn $550? Thats a new phone... They asked me €180 and i though they were crasy lolol. The 2nd battery n the charger for it i have one what really needed is something to replace the USB connection...
Try : http://www.globaldirectparts.com/HTC-HD2-Replacement-Repair-Parts-s/6112.htm
Can ask them on the part# for them to search.
Similar problem here. The Micro USB doesn't get inserted properly, seems like it's sticking out a mm too much, resulting in a very bad connection, whereas a few month ago the micro usb would stick in completely.
It now only charges, transfering content with a pc isn't possible anymore.
My thoughts were: if I buy a cradle, chances are that it would connect better due to the gravity (don't laugh ). Today I received the cradle but no result. It only charges, and I have a feeling the charging will stop in the near future.
I have the HTC HD2 for exactly two years and I found it very frustrating being confronted with what is in my thought a construction problem.
I've seen the link for dealxtreme, the external loader, but the comment posted below it, doesn't really encourage me to buy the item (high temperature)
Any other thoughts would be appreciated.
If you know anyone that can solder. They can detach it, and re solder it back onto the main-board. Shouldn't be too hard. I think? Should be possible.
Might help out some of you who have the same issues like I did. I used a toothpick to remove dust from the micro usb port. Although the connector still doesn't fit entirely, I now am able to transfer files again to my phone using the cable. Connenction still isn't that good, but might help.
htc broken port
Dear all. If you experience problems with changing your connector i can help.I have the equipment and will do the job for 20$ only (the price includes the brand new connector) Only problem is that you must ship it to Bulgaria so i can do the job. If anyone is interested can pm me.
AW
mobile shop
thank you
Is there a way to change the partition size witout USB?
EDIT: Is it possible to feed the power directly to the battery connector, and if so how? I could solder a simple circuit if this would be necessary to use a USB adapter as power source
Micro-USB
How can I change myself my micro-usb (for HTC HD2) . Are there a tutorial ? or any videos ? Where could I find all accessories and components required for the repair?
I think the accessories will cost more than a new HD2... I think you can´t do it by yourself because its to tiny
Bad idea!
Kelvir said:
How can I change myself my micro-usb (for HTC HD2) . Are there a tutorial ? or any videos ? Where could I find all accessories and components required for the repair?
Click to expand...
Click to collapse
If you're not a master of soldering, don't even think to!
Any "Masters of Soldering" out there? I would pay for it...
i6amokk doesn´t answer to my PM
EDIT: I bought a second HD2 with damged, but working screen... Now I change the Mainboard, that I have a completly OK HD2 an one with damaged Screen and broken USB. Now how can I stabilize the USB Port to prevent that the new Mainboard get broken too?
And i6amokk anserwed, I sent him Pictures but I,ve not much hope, because the top Layer of the MB is damaged...
Hi everyone
First I would like to thank the people who are here that make these awesome developments, I enjoyed them until today when I was trying to find a better
radio rom. I am/was using tytung's NexusHD2 NAND. I was going threw the radio roms listed in one of the threads and tried "Leo_RADIO_15.29.50.07U_2.06.50.04"
I had to get up for a second and when i returned about 5 min. later the phone was unresponsive. When I try to turn it on i can feel the vibrator motor spin for a split second and noda...No light with the wall charger pluged in or USB.
If anyone has an idea to what I did or what can be done I would be ever so grateful. This is my first smart phone and was so happy to have android running on it. I NEED it back. I've only had it for about a week and am lost with out it already.
I want to thank everyone in advance willing to give me some help!
Thanks from The NooB
Chris
I was reading some more and I'm sure its bricked but the PC does see it when its plugged into the USB...but it doesn't have drivers for it and it didn't have drivers for it before this problem.
I guess the problem is I shouldn't have loaded a TMOUS rom?
I thought It would be "OK" as long as it was a ".50" and not a ".51"
Such a sad day...first my little Leopard gecko broke her leg and then flying ants invade my house and go into my saltwater aquarium and mess that all up and now my new favorite toy is a fishing weight or new target.......I'm afraid to go outside to even go to McD's cause i'm sure i'll die somehow!?!?!?!
Someone please tell me there's hope.
I should have just traded it in for the G2X when I was up the mall today...
But I thought this Nexus NAND was the best thing in the world only problem with this phone was that I had no reception in my house.
Which is why I was messing w/ the radio in the first place...
If anyone figures anything out I'll be in the corner crying..
Thanks again fellas..
If you boot up with the volume down button held down, does it go into bootloader (tri-color screen, not MAGLDR)?
And does your pc have ActiveSync or Windows Mobile Device Center installed on it?
If you can get into bootloader, there is still hope...
Hey Huggs
Thanks for the the reply, No There is no bootloader screen, No nothing just a little blip from the vibrator motor for a tenth of a sec. when I try to just turn the power on, If I try to hold the Vol. key and power at the same time it wont do anything.
I did notice when I plug it into USB it try's to install drivers for a "QUALCOMM CDMA DEVICE" and after about 10min it starts to get warm near the bottom of the battery. I have windows vista so Windows Mobile Device is installed.
I left it go for about 4 hrs from 4am to am and then tried the battery again and again nothing, I'm pretty sure there's nothing I could do from USB.
Does anyone know if any JTAG will work or does it have to be the one I see people using, not the cheap Flea-BAY ones for $50?
also when using a JTAG do you have to have a special file or just the stock rom?
Or is there someone on here offering this service?
The phone never had reception in the house so I should be looking for other methods but this thing is like brand new and I would like to see it come alive.
THANKS AGAIN EVERYONE!
Sorry dude but you have 100% bricked your phone. You have no excuse other then lazyness as this is a very well documented fact and warnings against flashing and incorrect radio.
If you had taken time to read things properly you wouldn't have made this mistake.
Your only option now is to send it away for JTAG repair so they can replace your bootloader.
I wouldn't say its because of laziness. I looked up that rom and found a thread where people were using it. It was a ".50" and not ".51" rom and that was all I knew that was uncompilable.
Instead of starting the name calling or your this and that, How about some constructive criticism and say well "that particular rom isn't compatible because of"
I stayed up for 3 days strait and been reading for over a week trying to learn about flashing and what not. could I have spent more time reading YES but I flashed roms about a 2 dozen times and everything was OK. Like I said I used it because of the fact it was a ".50" and thought it was safe to use and the fact I seen the tread that it came from HTC and was safe to use. Guess not!
Thanks for your .02cents theatheist though.
Can someone tell me which JTAG box I have to use?
or what does the box have to support? I see others using the "RIFF BOX"
but 150 for a box is alot for one time use. does the box just have to support an arm7?
Again Thank you for taking the time to read this
Hope every ones have a nice holiday weekend
Can someone tell me why this particular radio rom bricked this phone?
and if anyone could tell me which JTAG box I would have to use?
would a cheap one from the BAY work?
what does the JTAG box have to support?
I am reading but I don't understand some of it.
Thank you for your time and reading this.
As soon as i finish posting this I will send you a PM with a link to someone that offers a JTAG service for $50 USD and lives in US. He is very good too, I would not recommend him if he was not very experienced with JTAGing HD2s.
I do not know why that Radio version brickedc your HD2 cause from what I know only the 2.04.50.xx or the 2.05.50.xx radio versions or the only radio versions with 50s that will brick a TMOUS. Looks like I might have to add 2.06,50,xx radio versions to that list. The reason why these radios with 50swill brick a TMOUS is because these radio versions were used in the Test TOM/Test T-Mobile HD2s which were actually regular HD2s and not the TMOUS that is out now with the extra ROM and RAM. There for these radios were not designed to run on the TMOUS.
Oh and you are correct about the %1 radio versions to0, they were all made for the regular HD2s also.
Thank you so much for your time Sir.
and thanks for the explanation, I would really like to try and JTAG it myself
do you know if any of the cheap JTAG boxes on ebay that support the ARM7 would work? I will shoot that guy a PM.
I hope you have a Safe Holiday weekend!
SeaWeed89 said:
Thank you so much for your time Sir.
and thanks for the explanation, I would really like to try and JTAG it myself
do you know if any of the cheap JTAG boxes on ebay that support the ARM7 would work? I will shoot that guy a PM.
I hope you have a Safe Holiday weekend!
Click to expand...
Click to collapse
To be honest i do not know if the "cheap boxes" you refer to will work or not. Maybe a link to the exact box you are referring to would help.
I do know this if you want to try it yourself that is cool, but be warned you have to have a small torques head srew driver, a HTC HD2 JTAG, a Riffbox with proper connection cables, a Omnei Repair Tool (ORT), the software to use the Riffbox, and it is best if you have a small power supply for the mainboard but you can use the power from the HD2 battery. Plus you have to completely remove the mainboard of your HD2 to JTAG it, which means you pretty much have to totally disassemble the HD2.
So not only is JTAGing a HD2 just for yourself expensive, but you need to have some skill to do it as well.
PM the guy I referred you to is a very good idea, best of luck with however you decide to JTAG your HD2.
Thanks for the response...Your very helpful.
I didn't know If links were permitted.? Here's the link's
1&2 are the same but different prices, They both support ARM7 architecture Which I thought the QSD8250 was?
#1. http://cgi.ebay.com/JLINK-J-LINK-V8...155?pt=LH_DefaultDomain_0&hash=item4aab620ae3
#2 http://cgi.ebay.com/JLINK-J-LINK-V8...551?pt=LH_DefaultDomain_0&hash=item35b1f2c6e7
There is a RIFF for $150 that I found but I cant really pull that off ATM.
There is others that support the ARM also. I've also found a no-solder connecter for about 15 bucks but I don't know if the pin-out is the same on the ribbon cable as the ORT-JTAG box(company that has the connecter). I'm sure I could change it around If i could find a schematic for the both of them(connecter and box)
I do have the tools to dismantle this and power station(I also mess with the Arduino platform and circuit building when I have time and recently have just dismantled my HTC TP2 for craps and giggles and have fixed multiple IPOD touches) I have been also ripping everything apart that had a battery/wire connected to it since I could remember. And try to get it back together before my old man would come home and would find his stereo taken apart...
The only thing that has me is the programming part itself like the actual file.
I don't know if it's something special for the box or just the stock rom?
I have watched some youtube on it but nothing really helpful.
I'm thinking I could do it and maybe help some others if I could nail it and do some more reading. My brothers into IT(servers) and a HTC nightly rommer so I was hoping he could help he and I was really hoping for some help from you good fellas here.
I want to thank you for the PM (very helpful) and the reply.
I will probably end up sending it to him because it's about the same price and I don't have funds for a new phone if I toast it, and hes a very nice guy. I just love messing with stuff.
Have a good one.
Chris
To be honest I do not know if the JTAG Emulators your linked would work or not. It looks as though it might could but I can not saw proof positive it would work.
Ii seems like you might would be able to do it yourself. You have a lot of the needed tools. I think the software for the Riff Box comes with the Riff Box but not sure as I have never JTAGed a device. The software allows you to reload or as the program calls it "res-erect "the SPL, you see JTAG restores the bootloader and that is it. Then you just flash a ROM of your choice to the HD2 and you are good to go. But I do recommend you flash a stock Windows Mobile ROM just for precautionary purposes.
Yes you want the no solder JTAG that makes it a lot easier as far as the set up process.
Hi everyone...
Im a little lost in here but, I have some questions...
I buyed an HTC HD2 T8585 (chinese version) and I contact the HTC support and they said that my IMEI and Serial Number is from an HTC Incredible S -.-"
But... in the HTC HD2 software (inside of the phone), I go to "Device Information" and appears another Serial Number, that they confirmed that is HTC HD2, but the IMEI is the same...
The thing is...
Can I have the HTC Sense in this mobile? If no, Can someone help me (step by step) to introduce the WM7 and Android in this?
I have the windows mobile 6.5 and the software is "DUMA.10X.W10.20.P29"...
Note: As I said before, Im new in here, and Im a little lost too... I need some support in here and via chat if possible
DUMA.10X.W10.20.P29 ! I believe this is the firmware used in HTC iPhone chinese copy/clones & is then skinned to look like the devices normal OS.
If I am correct that would explain why your iMEI/serial# are wrong.
If it is the Chinese copy then you will not be able to flash original HD2 ROM to it or use the tools for Android or W7 !
is it dual sim ? if so 100% China junk I am afraid ...
oh gosh...no wp7,android,dual booting,kicking other phones' asses for u then.i would suggest that you buy a used HD2 if you are convinced that yours is fake. But i think it is since theres no way DUMA.10x.W10.20.P29 will appear on the real HD2's bootloader. Does your phone look like this (http://forum.china-iphone.ru/viewtopic.php?f=22&t=5495&start=340)?...im not sure how the law is back there,but if you know who you bought it from and you seriously didnt know its fake, you should report it to the officials and to HTC.
As you have a China Clone you need to look elsewhere try these places :
http://translate.googleusercontent....t=8208&usg=ALkJrhg--QYr9hqfV_8mz-MuVEs2T3NF0A
http://translate.googleusercontent....461bea&usg=ALkJrhia4mLlC-eCEgbku66lC10SlLHBBg
Hope it helps
So unlucky then...
in other words...
Big mistake...
I have to sell to someone for 200€... and I will lose 10€...
or I sell it online...
The biggest problem its that I really think that was the original HTC HD2 and I was f*cked by the chinese ppl...
The HTC says that this have origins of france and chinese... so...
I dont know now...
Oh this is bad crack : (
Well, u should seriously report this to the authorities if you know whom you bought it from.They wont be getting a new phone for you,but at least you could charge them and ask for compensation. But still, you should have known better than to buy it from them Chinese before thourougly checking. I mean im not against them in any way. Most of them are good guys, but some just fake everything from a bloody pen to babies these days.
and...
but no1 will try to get an solution or some software to install in that cellphone... I really dont like this one, its too... simple...
Fredalone said:
but no1 will try to get an solution or some software to install in that cellphone... I really dont like this one, its too... simple...
Click to expand...
Click to collapse
It is not just software, the hardware is no match for a genuine HD2 & has no hopes of running real Windows Mobile ROMs, if you bought it from a shop you may consider returning & kicking up a huge fuss or if via online credit card or PayPal you may be able to get refunded !
Best thing you can do is learn from this & do more research on products prior to purchasing, especially for any to good to be true deals from products from China.
Mister B said:
It is not just software, the hardware is no match for a genuine HD2 & has no hopes of running real Windows Mobile ROMs, if you bought it from a shop you may consider returning & kicking up a huge fuss or if via online credit card or PayPal you may be able to get refunded !
Best thing you can do is learn from this & do more research on products prior to purchasing, especially for any to good to be true deals from products from China.
Click to expand...
Click to collapse
I just want to put my MMS working, because when I put "send" (for example an image) it appears the MMS but in dark, like "disabled"...
You cant help?
Fredalone said:
I just want to put my MMS working, because when I put "send" (for example an image) it appears the MMS but in dark, like "disabled"...
You cant help?
Click to expand...
Click to collapse
You are missing the point, your phone is totally different to ours, different hardware, different software,probably different settings/options, so the chances of us being able to troubleshoot your mms problems are slim, unless you wanna upload a dozen or so screenshots of the various settings menus,, and explain in a lot more detail what you already tried, the facts around the problem(is there an mms data connection configured, can you browse the net, and on and on)
Hi everyone!
I got some questions but first off I'll go ahead and give the background story of everything.
I bought my HD2 about 2 years ago, now when it finally got payed of (20/01 -12) of course I dropped it for the first time ever and the lcd screen totaly 'died'. I have always loved this phone, but to send it to an repair-store is not an option as it costs 1789 SEK (Swedish 'krona') -is something like 269,03 USD. Not much maybe but for an 2 years old phone, thats too much. /Money I rather spend on a new phone..
Tomorrow I will most likely go and buy the Galaxy Nexus, but still think the HD2 is worth saving, what im thinking of is to order an LCD and try it myself. If I make it worse well, then It wont matter.
My questions:
* After searching for LCD's they say "..for model T8585"
- I guess all HD2 (exept T-mobile maybe?) has this model-nr..? On my box anyway its say T8585.
* Some stores that also say "for model T8585" also say "only US"
- Well, I guess they dont mean "only shipping in US" as its the same store/site that sells other not saying "only US". Is this model-restrictions and how will I know the screens will 'fit' my Leo?
* Is there anything else I should look for exept the model number (T8585) to be certain that it will work/fit ?
Also I will attach a picture of how the screen looks like turned on so you maybe can tell me if I need to replace more than the LCD (Digitalizer/touch screen)
I saw another, old, topic about this but the picture was gone and I guess he could see and then thereby use his cellphone to test if the touch-screen/digitalizer worked wich I cannot.
Might be hard to tell, I dunno..
-If anybody know an reliable store/site that ships to Sweden that sells screens or right screen you would make my day if you could provide me with link.
-Also if they dont/or if you dont know -ship to Sweden; please provide link.
Another question that doesnt have anything with this topic (other than I would have needed this 3 weeks ago ) if there is somewhere to find an Otterbox case for HD2? I know they dont support Leo no longer but I will purchase it for the Galaxy Nexus also so would be nice if it could be found for HD2 also.
Thanks in advance!
Edit: And yes, I have searched the forum. All I find is dead links, non-helpful etc etc.
Oh thats not so good
I dropped mine a while back and cracked the screen big time. Decided id repolace the digitizer but it was only when i got it all apart that i found i needed more expert knowledge than i possess to put it back together. Which all meant another £50 to buy a digitiser/lcd combo. Theres plenty on ebay, such as http://www.ebay.co.uk/itm/110758732279?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
You could always ask the question about whether this is the right model for you. They should be able to help.
Its a bit of a faff to fit the new screen, but if your in the middle of a contract and cant do an early upgrade it is possibly an option. Or just get another one if you can upgrade....
Anonaxi said:
Hi everyone!
I got some questions but first off I'll go ahead and give the background story of everything.
I bought my HD2 about 2 years ago, now when it finally got payed of (20/01 -12) of course I dropped it for the first time ever and the lcd screen totaly 'died'. I have always loved this phone, but to send it to an repair-store is not an option as it costs 1789 SEK (Swedish 'krona') -is something like 269,03 USD. Not much maybe but for an 2 years old phone, thats too much. /Money I rather spend on a new phone..
Tomorrow I will most likely go and buy the Galaxy Nexus, but still think the HD2 is worth saving, what im thinking of is to order an LCD and try it myself. If I make it worse well, then It wont matter.
My questions:
* After searching for LCD's they say "..for model T8585"
- I guess all HD2 (exept T-mobile maybe?) has this model-nr..? On my box anyway its say T8585.
* Some stores that also say "for model T8585" also say "only US"
- Well, I guess they dont mean "only shipping in US" as its the same store/site that sells other not saying "only US". Is this model-restrictions and how will I know the screens will 'fit' my Leo?
* Is there anything else I should look for exept the model number (T8585) to be certain that it will work/fit ?
Also I will attach a picture of how the screen looks like turned on so you maybe can tell me if I need to replace more than the LCD (Digitalizer/touch screen)
I saw another, old, topic about this but the picture was gone and I guess he could see and then thereby use his cellphone to test if the touch-screen/digitalizer worked wich I cannot.
Might be hard to tell, I dunno..
-If anybody know an reliable store/site that ships to Sweden that sells screens or right screen you would make my day if you could provide me with link.
-Also if they dont/or if you dont know -ship to Sweden; please provide link.
Another question that doesnt have anything with this topic (other than I would have needed this 3 weeks ago ) if there is somewhere to find an Otterbox case for HD2? I know they dont support Leo no longer but I will purchase it for the Galaxy Nexus also so would be nice if it could be found for HD2 also.
Thanks in advance!
Edit: And yes, I have searched the forum. All I find is dead links, non-helpful etc etc.
Click to expand...
Click to collapse
You should buy whole combo(LCD+touchscreen) in order to do a fine job(it will be much easier for you this way, with good quality in the end). Doing like this it doesn't matter what version/type would be (US or whatever), 'cause they are interchangeable: some rumours indicate US version to be better by quality.
Ebay could be a source for you...
Good luck!
bib*oops said:
You should buy whole combo(LCD+touchscreen) in order to do a fine job(it will be much easier for you this way, with good quality in the end). Doing like this it doesn't matter what version/type would be (US or whatever), 'cause they are interchangeable: some rumours indicate US version to be better by quality.
Ebay could be a source for you...
Good luck!
Click to expand...
Click to collapse
Thanks alot bib*oops, that was of great help!
I was actually thinking of buying a combo, lcd&touchscreen, as Im not 100% sure that my touchscreen still works as it should.
-Didnt know the rest (about the screens) so thanks, oh hundreds of thanks to you!
How can one choose combo assembly?
There is one for T-Mobile HD2 and one for European HD2.
This one says that its for T8585
http://www.ebay.com/itm/120745779165?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Is T8585 only european? Or are they both(T-Mobile and European) marked as T8585?
Is this one compatible with european?
http://www.ebay.com/itm/120745779165?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
DimensionSlider said:
How can one choose combo assembly?
There is one for T-Mobile HD2 and one for European HD2.
This one says that its for T8585
***
Is T8585 only european? Or are they both(T-Mobile and European) marked as T8585?
Is this one compatible with european?
***
Click to expand...
Click to collapse
Yea I had the same question but then saw something somewhere saying that T-Mobiles version of HD2 is slightly larger (longer or wider -dont know exactly wich -or both) and therefore I will go for one that is stated for EU-model and would suggest you to do the same, depending on what type of HD2 you've got.