Related
Hi,
I just wanted to have some special ringtones for some contacts or groups...
But so far, I wasn't lucky:
Caller-ID: slow, often didn't show the correct number, lots of compatibilty troubles
RingtoneX: slowed down my device even more than Caller-ID. And it doesn't recognize the ringtone directory, which I moved to \Storage\Rings. If I set the ringtone folder in RingtoneX to this path, it copies the used files to \Windows\Rings - which is slow, useless, and clutters my valuable main memory.
PhonExt: didn't work at all. I could set the ringtones just fine, but they're not used if a call comes in. And it only supports WAV.
Is there any other program I could try? Or are there ways to work around the named troubles?
Bye,
Mirko
Yeah I've been lloking for a good ringtone app as well. Finally stuck with IA CallerID for the same issues you mentioned. Haven't been experiencing a lot of trouble with it though, my tones are also in \Storage\Rings and I have small animated GIFS for groups. Also I only setup the people who ring me the most not all 400+ contacts.
You're not alone. I had hunt and found that IA is the only one that works(buggy).
The caller ID program is lacking somewhat important features such as assigning ringtones by category.
Can you try whether this works for you?
I simply modifiy the registry entry for the ringtone when a call comes in.
Surprisingly this worked for me - I'd have expected the system's call popup to read this entry before I get control...
Nontheless, I'd like to know if I'm just lucky, or if it works generally...
The program interface is a mixture of PhoneExt and RingtoneX.
Like PhoneExt, it must be running to work (i.e. put a link in autostart folder if you want it permanent), there are category ringtones with priorities, and there's a tray icon with popup menu.
Like RingtoneX, you can set ringtones for both groups and contacts.
Currently, the contacts are only read at program launch, so you have to restart it to recognize modifications to the contacts.
In the contacts list, the used catecory ringtone is shown, if no contact ringtone is set. You can tell whether it's a contact ringtone by the "X" (remove) button - it's inactive if the ringtone's received from the categories.
There might be problems with huge contact databases, since I create a number -> ringtone map for performance reasons (searching the number in the contact database would be far too slow, esp. since numbers can appear in different variations, which I unify...).
Another thing to notice: I list all files in the ringtone folder - no matter if they're valid ringtones or not.
Oops: Last not least: The installation. Just copy the contained file somewhere on your PPC and execute it there. You should create a new folder for it, since contacts.dat and categories.dat will be created in the directory where the program file is located.
btw: Except for the modified ringtone entry, there are no modifications to the system, i.e. after exiting the program, all will be like it was before...
Hi !
I've made an app to display picture of contacts to dial, and I'm interested in how you get the incoming call notification (I'd like to make my own calledID). So I you can share source or point me some sites where to find info, ...
I hope my app will be available soon.
Regards,
Olivier.
has anybody tried Mort's application?
Another try...
I'm using lineSetAppPriority now, which should ensure my tools can set the ringtone before the default popup appears. Sadly, on my device it's completely ignored. But maybe it works on other devices - or has somebody here experience with lineSetAppPriority?
If you copy the included mortsms.dll to the \Windows directory, customized SMS signals should work, too.
Programmers: If you create a registry key with <window title>=<window handle> (as DWord) in HKLM\Software\Mort\SMSNotify\Windows, you'll receive a WM_COPYDATA with a string containing "SMS\n<sender>\n<text>" whenever an SMS comes in...
Mort
I've installed MortRing 0.2 on my device (haven't set ringtones yet) it uses CallerID Picture and MortRing ringtone so it works!!! Now I have to find a way to uninstall CallerID without a hard reset. Thanks.
The sms function is not working on my mda compact
sebi112 said:
The sms function is not working on my mda compact
Click to expand...
Click to collapse
Er, right...
To active the mortsms.dll, you either have to do the following:
1. Show "Messaging" and close it again (real close, i.e. Storage - Running programs or any "Close button replacement" like PocketPlus).
2. Copy mortsms.dll to \Windows
3. (Re)start MortRing
Or put the DLL in the \Windows directory, do a soft reset, and launch MortRing...
Mort, your program really rocks! Thanks alot dude 8)
but one thing: when i get a missed call, it says 2 missed calls (one with the number, and the other with UNKNOWN number)!!
otherwise, everyting is COoOoOoOoOoOoOoOoL :lol: thanks
Does even not work. ringtones ok. sms does not work
Here's a version with installer, maybe it fixes the SMS problem (I think the DLL doesn't get registered correctly without installer...). Restarting "Messaging" or a soft reset might still be necessary after installation, though...
It also creates a Startup entry.
@ezzkht: That might be a follow-up error from the lineSetAppPriority problems. I forward the call informations to the next priority program (usually Windows' call popup). If the priority is ignored, I do that after it already got it... But I've got no idea why the number gets lost...
Here's a variation without lineSetAppPriority. Maybe it helps with the "unknown" entry in the call history...
Ringtones works, sms works Thanks, Mort!
Here's a minor update. On some devices, the mortsms.dll did not work. It seems like ole32.dll isn't preinstalled on all devices, but I was able not to require it anymore...
Currently, lineSetAppPriority is removed completely, as it doesn't seem to have any positive effects. Sadly, due to this, it doesn't work everywhere - at least I know of one user with an MDA II and a quite a lot of contacts (about 500), where it doesn't work. I don't know whether it's because of the amount of contacts or the device differences.
(SMS notifications should work everywhere, though)
after a test it plays the sms ringtone that i selecet for one adressentrybut after a while the standat sms tone is gone and for all incomming sms the selecet for the entry is played
cooooooooool, now it works well 8)
thanks Mort :wink:
Now the SMS tone is reset a second after the notifacation and on program exist, so the default tone won't be overridden with the recently used.
Additionally, there are three pseudo categories: *other contacts*, *not in contacts*, and *number supressed*.
Mort!!!! would like to thank you again for this application works very well on my imate JAM! I'm really happy with it!!! Now I have more RAM to play with as Caller ID has been removed! Woooohoooo! Respect! :lol:
I'm searching now, but phoneext has been the only thing I found, and I never really liked it since it took over a lot of the functions of the phone.
mortring
mortring www.sto-helit.de
Works for SMS messages also. The author mentions it can't handle large contact databases. He doesn't give a specific number but it works fine with my contact list 600+ contacts. Also allows you to assign tones by contact category (my main use since this is far easier than individual tones). BTW you should realize that in your contacts edit view you can assign a ringtone to the contact along with their photo.
- Richard
haha, dang, I didn't realize that was there in the per contact edit.
Thanks!
I used Photo Contacts PRO (Pocket PC Edition) by PocketX Software Inc.
Editing the contacts info seems to be bugged as far as updating phone numbers and other info. At least on my phone. However everything else on it works great. You can select a different ring tone for each contact. Also allows you to set default ringtone for users not in your contact list. Also has a better appointment interface and several other goodies. I highly recommend.
You can do this without the need for third-party apps... right from within your Contacts applet. Just edit the contact and assign a ring tone to him/her from the available drop down.
Hi,
I am quite new in the converged world
I have a TyTN and I would like to know it is possible to assign specific ring tones to some contacts as this is possible on simple phones. I have looked in the control panel but have not been able to locate such a possibility.
Sorry if I am missing something very obvious here.
Best regards,
Murat
PS. This site is just gorgeous in terms of the quality of the information (I mean it; I am a regular user of other information sites on PDA and none of them has the same quality of information as here - even if I do not always understand some concepts on the phone aspects of these tools since these aspects are quite new to me).
Not something I do but here are a couple of links to check out:
http://forum.xda-developers.com/showthread.php?t=236909
http://www.motionapps.com/mring/_otherppc.jsp
Mike
yildi said:
I have a TyTN and I would like to know it is possible to assign specific ring tones to some contacts as this is possible on simple phones. I have looked in the control panel but have not been able to locate such a possibility.
Click to expand...
Click to collapse
No need for an external program. You can assign individual ringtones to contacts directly in the contacts application. When you edit a contact, you'll see a "ringtone" field. (at least in WM6; probably also in WM5, but I'm not sure.)
Cheers
tadzio
tadzio said:
No need for an external program. You can assign individual ringtones to contacts directly in the contacts application. When you edit a contact, you'll see a "ringtone" field. (at least in WM6; probably also in WM5, but I'm not sure.)
Cheers
tadzio
Click to expand...
Click to collapse
Just to confirm - Yes this is available in WM5 edit contact menu.
Cheers
Mike
Thank you very much to both of you! Yes, this works with WM5 too but PI was hiding the field from the default display of the contacts and this is why I was not able to locate it. I have been able to add it and now I can change it.
Thanks a lot!
Best regards,
Murat
Guys,
I've posted this before but nobody has helped me yet.
Basically put I have a couple of contacts for which I have more than one contact number (home, Mobile etc..)
Anyway, when i receive a call from one of these contacts, the name is not resolved, the picture is not shown and the custom ringtone I have chosen (all by vanilla stock rom means) does not ring!!
I have seen this happen with "Exact" matches to contacts in my Contacts list and also if I have entered the number as "+447760....." instead of using the default "07760...." prefix for UK mobile numbers (as I'm abroad a lot so need to use that to dial them) it also refuses to recognise that they are in fact the same number - something my Artemis did without an issue.
Please help me resolve this - it's ruining my HD experience!
Thanks
21 views and no replies - come on guys please - going on a trip tomorrow and I need this to be sorted if poss - doing my head in!!
I had exactly the same problem on my X1, which I have now sold so I could get a HD. I was on o2 uk using itje's 5.061 rom. What network are you on and which rom and what software have you installed? maybe something we both installed is causing the problem
Right, I'm on a stock rom on an unbranded Touch HHD on the Vodafone network. Programs I've installed are as follows:
Changscreen,
HDTweak
Advanced Config
S K Tools
Battlog
Fingerkeyboard
Resco file Explorer
Very strange - it might have happened since I restored a backup but I doubt it.
Try reducing Phone>Call ID match number in Advanced Config.
I have similar problem... Just installed dutty 3.0X and when i sinchronized all my contacts become duplicated, so i deleted manual only the first ones. And now when someone from the contacts is ringing i dont get picture or his name and I am sure that i have the same number in the contact list. Odd
Anyone have any other ideas about this? Still causing me some considerable pain - I seem to recall it started after I started to reconcile the outlook contacts with my PC - this may have caused a different contact ID (or something?)
same problem and no solutoin... :-(
i managed to fix this by reassigning the phone numbers to the contacts page. It seems to occur when you use 3rd party contact management apps before you have assigned numbers.
Works fine now
mslookout inserts spaces into phone number, and prolly phone cannot recognise incoming number having spaces in phonebook?
I also cant fix it by changing CallIDMatch in the registry. It's bizarre as I have 2 contacts in my favourites: both are now set to No's starting with '0' yet when one texts me, their name shows and when the other does, their number shows. hard and soft resets have also failed to resolve this, HTC helpdesk no use at all, also logged with Windows helpdesk in case it is a microsoft, not htc, problem.
Am keen for other things to try, open to suggestions....
Am disappinted and amazed that what is otherwise a great phone, can't do what cheap cr*ppy phones, can , ie show the name of the person calling or texting.
Have you tried using Advanced Config and increasing Call ID match to 9 or 10?
No caller name when receiving Incoming Call
This may be an old thread, but sometimes the newer ROMs also have the same problem.
This happened to me after updating my from from WM 6.1 to WEH 6.5.3. So, I am updating this thread on how I resolved my problem.
Step 1. Edit the Registry and change the CallIDMatch value to 7 (the original value was 10).
Code:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:00000007
Step 2. Soft Reset (power off and restart)
Before I did this, I needed to copy my contacts from SIM to the Outlook Contacts list, so in my Contacts list, I have "double view" of both lists on the same screen - frustrating.
After this change of the Registry key value, I erased all my contacts from the Outlook Contacts list (use the Hide Sim Contacts function) because I prefer to have my default contacts to be from the SIM card instead of the Outlook Contacts. This way, I can be assured that all newer contacts will be stored on the SIM card and I do not have to worry about losing contacts if I change phones.
Hi all, there is a way to add more cell numbers to the same contact? I can choose between home, fax, office but I need only to record a second number as second cell number. Not possible modifing default tabs?
Excuse me for my bad english..
Thanks!
Yeah, I second that plea.
yea i was wondering if this was possible but had no luck finding a way
I have the same issue too, I even tried to find if it exists in outlook and then synchronize it with my topaz, but it's not in outlook either.
I use the same trick to change the "file as" for contacts different than what HTC has in the drop down list.