Related
I have no idea why, but every 10 minutes or so BT turns itself on on my XDA2.
This is killing my battery folks! Any idea why it might be doing it?
TIA!
Are you running Pocket Bluetooth Tools? There is a *feature* in this program that can do this kind of thing. :x
I uninstalled it a few days after installing it because it was draining my battery, and frankly gave me little benefit for the trouble. The BT stack in the 1.72 (also 1.66?) ROM version gives a BT COM: port for use with BT GPS, and that was the major reason for this program.
Anyway, this is a possible source of your problems.
Thanks BRosenow - that did the trick!
Cheers!
0
Hello XDAlovers
I happen to have the same problem on my m1000, but ive never installed any Blootooth tools whatsoever.
Every now and then i see my blue bluetooth light blinking telling me bluetooth is on. When i check the settigs however its turned off! (??????)
Any ideas out there ?
Thanx
peace
Hi .. anyone have an idea.. ??
Or have same problem ?
I got a message saying that no BT hardware is installed on the phone.. when trying to enable it ..
A soft reset fix it.. .. but even if I dont touch the s100 it get this after some time.. any clue..
Hardware or software glitch ??
Regards Carlis
mine sometimes does this i just click the bt icon again and it works? :?
gazzaman2k said:
mine sometimes does this i just click the bt icon again and it works? :?
Click to expand...
Click to collapse
I notice that if I go in and remove klick in inbound BT port , shut down BT and restart it .. .. I can use BT again if I stop it ( well strange it was off.. ) and start it again ..
This got realy bad after the Qtek s100 update.. .. but was there before to..
Hope it not Hardware.. .. hate if I must send it away..
Carlis
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
I only have this problem when calender+ 2.2 is install. have not try the 2.3.
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
thx.. guys... I even reflashed it to if it got bad under the upgrade... I will also call in the problem tomorrow... not to brightpoint.. as my was imported and uses Dangaard Telecom Swedens ver of the upgrade... same bug in both BT software...
Carlis
bamse said:
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
Click to expand...
Click to collapse
Sent a mail to Swe Qtek support about it.. let U know what they say..
Carlis
I have the same problem..
I also have this problem (sometimes working, sometimes not working after soft reset), and also have Calendar+ 2.2.3 installed, now I removed it, let's see if it will happen again.
A way to get pass the new BT patch..
Hardreset
Softreset when Unit says its done after Screen align and timezone etc.... before the ExtRom load.
Install all cabs in the now visible External Rom folder exept the one named:
Default_Patch_bthusb.CAB .
You now have the old BT and all other is updated.
Or ..
Live with the new BT patch and do like this:
Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated.
Works 90% for me.
Carlis
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
5 soft-resets later and my BT-module is working again. Strange ****.
Same thing here sometimes...
Hi everyone,
my Austrian T-Mobile MDA compact (original firmware, no "cross-update" or whatever) also has this problem sometimes. There where some resets too, when switching on the device after using a BT headset (turned BT on -> connected BT headset -> made call -> endet call -> switched MDA off, while headset was still on -> switched MDA on -> imediate "auto-softreset"). By now I haven't realised, what's the reason for it, but I will take care.
My guess at this moment: Something's wrong with handling of bluetooth headset connections or/and suspend handling.
I'm really asking myself who the f*ck is responsible for the fact, this beautiful little device is stuck with this crappy MS bluetooth stack (missing profiles, buggy like hell, etc.)...
I got tired with the bug and now I leave my BT on 24/7. My old habits of keeping my phone charged makes this ok for me.
I occasionally got this bug both before and after the upgrade to 1.06.
I simply switch off the power and on again. The bluetooth is the back. It works every time for me.
In setting.. U have 2 BT settings.. one for PORTS and one for manage devices and turning bt on and off.
activate a bt inbound port or outbound port under settings... system .. bluetooth settings.. to get bt back..
I now use Bluetooth switch by buzz_lightyear to manage the bt.. ,no more bt hardware error
Love this little soft.. Thank U Buzz.. !!!
Its even a huge + to use it .. soooo easy to enable and disable bt.. both in discover and hidden mode..
It can be found in the forum.. Even using hes replacing BT icons.. realy well looking..
Thx again Buzz..
pell0 said:
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
Click to expand...
Click to collapse
Is there a fix?
hey all,
I get this intermittant problem too... probably because I leave bluetooth off 95% of the time.
My XDA 11 is running ROm 1.60.00WWE, with ExtROM version 1.60.44
Soft resets seem to make little difference.
Does anyone have a easy and comprehsible solution to restore the 'missing' Bluetooth hardware?
Thanks
tym
My Jam has recently decided that I dont' have any bluetooth hardware.
I have seen people complaining about this problem after they updated Radio or ROM - but I haven't done a single thing with my JAM. What they hellis going on. This thing is total piece of garbage....
you need to soft reset it
i have the same problem plus i have no audio on my phone..you can say that again man. abviously i already made a soft reset been doin it for 2 days now! damn! :x help anyone?
This is total garbage. How can a phone just start malfunctioning like that for no reason? This is pathetic.
I have an experience as: I have installed the radio scheduler which I can set to turn BT on and off as pre-scheduled. During the time the BT is off as scheduled, I manually turn it ON then the device say: No BT Hardware. During the time BT is ON as scheduled, I turn it OFF then ON again, no any problem's arised. When I uninstall the Scheduler software, everything's OK. But because I need radio scheduler application to turn GSM/BT ON and OFF automatically as my schedule so I decide not to touch the BT Icon in the bottom tray when BT is off. Without that problem the software run perfectly.
My XDAmini's BT is perfectly paired and worked with my Jabra BT 258. For Async function with my laptop, I use BT Tool 1.0 patch.
So for your cases, I think there is some software have been installed to turn ON/OFF BT function in lower level than the Microsoft's BT stack. Then when MS's BT stack come to check the hardware has been turn OFF, it found NO BT Hardware.
Hope the explanation may help.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
Normally the issue was going to be fixed
Normally the issue was going to be fixed in the 1.06 see reporting on issue
Well.... I had the same message before when I upgraded to MA_DANG_WWE_10600_115_10500_SHIP. Then after a hard reset the problem gone. But his rom is not so stable.
Now I'm using the ma_cdlsku1_10600_110_10500_ship but override with the US radio to 110. And I can say is the most stable I had try on others.
After every soft reset my BT headset will paired by it self with my XDAmini, not like the others which I need to pair on manually. But only one thing is when the BT converage is out of range it had to pair them again. Anyway this is better then nothing.
Note: the radio 110 overiding is not for BT improvement. Just that is for the radio signal upgrade.
Hope this help.
When you want to enable the bluetooth try to make it also discoverable to other devices. This will enable for sure the blue tooth and you will not get again a "No bluetooth hardware" error.
Not true. I have mine discoverable, but this problem seems to occur randomly.
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
bogs said:
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
Click to expand...
Click to collapse
Explain de REGISTRY trick on the prog you install. Give us more information please
what error are you getting? i modified the registry because i had an license expired error..if thats not the error dont bother with the registry. anyway about the bluetooth device not found error i found out the SKtools application is doing it..so the easiest way would be a restore registry on the SKtools app then soft restart.
how long does it take for you guys on a HardReset to get to the startmenu?
Same problems here:
1- No BT HW found
2- BT SW detects Flight Mode on and a message pop up saying to turn off FlightM to activate BT...but FlightMode is turned off yet! than the message is in Spanish and my ROM is Italian....
Really an annoying problem!!!
I hope that HTC has been informed about this!
Today, i've got one more this error. I'll made a screen copy when it happen.
When the problem occurs, there is no possibility to select bluetooth, all is grey
How does i take a old bt manager (before upgrading it works very well)
Tx
hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks
hi
any test?what do mean?
Zero|Cool said:
hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks
Click to expand...
Click to collapse
which ROM do you have?
Do you happen to have BigMike bluetooth running?
standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.
Try going through your power management under settings.
You might have tick a few things there.
I was getting this trouble too!
As Resident evil... on nights my device wakes up and begins screaming STARS!!!!
I just call Claire redfield and Alice and they burn on its head! PUMMM!
jajajaj
Well... check out your settings if you have a program runing under... and it needs conections via BT, Wi-fi or GPRS... your device gonna wakes up trying to get conection all the ways it can... if nothing is runing behind maybe was a bad flash... reflash it...
Hope all we can help you...
We are like a squadron supporting forces... Huh im playing too much Acecombat 5....
It could either be Bluetooth running and also it could be some appointment/message turning your device on. Also, do you have your device cradled? ActiveSync (if connected to PC) will turn your device on to sync.
Hope this helps
red_hanks said:
standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.
Click to expand...
Click to collapse
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks
Zero|Cool said:
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks
Click to expand...
Click to collapse
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.
motisu said:
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.
Click to expand...
Click to collapse
I read somewhere that if you installed another BT stack that eventually it would solve the problem? Is this true?
ok there is fix but i do not advice you to use it if you use BT handsfree - because with original driver BT turns off when device get in standby and this one keeps it working
you can install S2U2 and set:
Lock when device wakes up: ON
Power Off in: 5s (this is the minimum).
this is not a solution, but more like a workaround...this works for me well...
Hi to all.
Do someone have problems with the activation of the bluetooth feature on this pda?
For example when I try to enable it on comm manager, my hd2 simply freeze, and the only solution is to reset the equipment. What is strange is that when it comes back the bluetooth is on.
I don't have tomtom installed, the rom is 1.48 wwe htc and I have this problem with 1.43 rom also.
Please can someone help me with this subject.
Best regards,
Someone ??
same thing happen to me
and i have another problem
i cant send files via bluetooth using resco explorer ??
but by using the normal file exlporer no problem
anyone have the same problem ?
im using miri 1.2 rom
Up Up .. Someone with similar problems ...
Hi,
I had a similar problem with my HD2.
Activate BT took a very long time and failed with an error message, I can't remember it but it says that it wasn't able to activate BT.
I did a HARD reset and everything went ok !
same problem here. I use bluetooth for the carkit in my car. But since bluetooth is a huge battery drain, i turn off bluetooth the moment i get out of my car again. And turn it on when i get into my car. All via the comm manager. Here on miri 2.0 based on the 1.61 rom the problem is also present. The only way to fix the bluetooth freeze/malfunction is to softreset the device. At startup of the device bluetooth is indeed turned on....
Me too having the same problem
It got struck when I've tried sending files to my friend's phone via Bluetooth. I restarted my phone to get it up (luckily it got up with Bluetooth on)
today the bluetooth freezed when im trying to turn it on via comm manager
softreset solve it
im using miri 1.2 rom
in this time the sms get stuck in outbox...
its the same problem.
try pinch2zoom in fileexplorer....it doesnt work, and alarm doesnt ring too...
me too
I have the same problem and still do :-(
My HD2 freezes when I connect to my PC through comm manager/ActiveSync. The only solution is soft-reset!!
I have latest ROM 1.66.403.1 DAN
I can't figure out why and how to fix it... anyone?
Active Syn BT Freeze
I have the same Active Sync / BT freeze problem. I use Miri V.22 6.5.x. Believe having this problem since V 17.x. I don't remember having this when I first flashed ROMs in March.
Any update on the issue?
Thanks
Possible solution
This seems to have solved my problem.
http://forum.xda-developers.com/showpost.php?p=7025327&postcount=23
I could not delete/rename BtCoreIf, but just deleting BtSdkCE30.dll and making BTTrayCE.exe as a shortcut in startup is working so far. Two long syncs with no freezes.
I hope this helps others.
It froze after an hour connected. Better but not great.
Finally managed to delete BtCoreIf.dll. Trying the next few days to see if it solves the BT problem.
fixed
I found out that my BT was freezing because of third party application which I have installed in my phone. I uninstall it and never froze since
Fixed as well
Thanks. Yes, this seems to be the case here as well. I managed to follow the instructions I provided above, deleting the two files TomTom had changed, and now I'm back to having my BT Active Sync working well again.