Titan and Cisco VoIP - Call Manager - Mogul, XV6800 General

Whats up everyone,
I work for a school that uses Cisco System IP Phone's. I was curious if there is anything I could install that will allow me to use the Wifi built into my phone to connect to the Call Manager Database? We have wireless phones here that do it but they are a tad bigger and quite bulky. I rather just carry around my Mogul instead of both phones..
Anyone have any ideaS?

Related

Possiblities to route GPRS/Edge

I don't know if someone had mention this before. This sounds a bit too demanding from a cellphone. Anyway, here it goes:
Is there anyway (software/mod etc.) that can make a WM6 device(mine is Herald) to function as a router, routing GPRS/Edge connection to other wireless devices? I know it's crazy, and I know if it really works it can probably only work under adhoc mode(i.e. only to one device) but not as a wireless base station, but it would be *really* sweet if I can have my own wireless Internet with me wherever I go, not only on the 320*240 cellphone.
http://forum.xda-developers.com/showthread.php?t=357152&highlight=wifi

How to use G1 to tether to Palm, Windows Mobile? Configs?

Hey all, on my Nokia s60s I used to be able to bluetooth tether to palm (My Zodiac 2) and Windows Mobile platforms. On Palm I had to use a script and AT commands to work right. Has something like this been done to the G1 yet? I know Windows Mobile I could just use anetshare (Which is my main setup basically) and get online. (Palm could do same)
However the reason I ask for a alternative way is because I learned from using the iphone tethered to the G1 is that the config is off. The iphone for example EXPECTS the internet to be FAST (Since it assumes your on a real wifi. Not a Wifi with the speed of a 56k) which as you know on a PC you can set TCP connections and timesouts etc to fit your connection profile.
When the product in question is dialing or tethering via bluetooth modem method, it seems to run a lil smoother as it understands what speed to expect.
Anyways just wondering. I like to be configured for all situations. =)

Tether 2 phones together?

I know this seems almost pointless...But I have both the Diamond 2 on att, with an unlimited data plan, and the Droid Eris through a pre paid. I want to know if it is possible to use the "Wi-Fi Router" on the Diamond 2 to share internet with my Droid Eris?
Ive tried a few times, and I think it might have to do with the Diamond2 showing ps as IBSS ad hoc connection.
Is there another way? or is it even possible to begin with?
The reason is just so that if I run out of data on the prepaid, I can connect to the Diamond2 if i really need to if im not near a wifi spot.
I dunno if this helps but I tethered my xperia to my blackberry by using the blackberry as a "bluetooth modem". I'm not sure if theres such a setting in android (probably)
Take a look, see if it can be done without wifi
thanks, but im trying to connect through my Diamond 2 and unfortunately android doesnt ask me what services I want to use when they are paired.
Android does not connect to ad-hoc connections out of the box. You need to root your Eris. But as far as I can tell, no one has figured out to root it yet.
I'm trying the same thing...
But my setup is attempting to use internet sharing or the WMWiFi application to share internet to the bluetooth of a Samsung Propel Pro to the bluetooth of an older Samsung Blackjack with no sim card. Just to get the older BJ to see the internet, but I can't see to get Bluetooth PAN working on the setup.
Is this possible to do? What am I missing?
anyone got an idea. this would be a cool trick to do. Cheapest VOIP Cheapest VOIP calls
i know that if u can put both connection to ur pc from wifi with both or to wifi with on and usb with the other. in network connections u can "bridge" the connection

Sharing a WM ICS connection in a Wifi (adhoc) network

I figured out that using my Imagio as a WiFi Router drains the battery faster than it can charge. This is bad for a sometimes day-long connection using low bandwidth sites (live blogging for hours on CoverItLive.com).
Typically, I use the Imagio when WiFi isn't available, or is flat out ridiculously priced ($thousands in some convention centers).
I have to work with my partner, who also needs a connection, and sharing it would be oh so convenient using WiFi. So I thought, why not share my Imagio's connection by using Internet Connection Sharing on my computer through the WiFi. Not so fast: all ICS uses a fixed IP of 192.168.0.1. Conflict city when you try to use ICS twice in the same daisy chain.
"So", says I, "why not use Network Bridging to accomplish the same thing?". Well, this works in getting the signal to my partner's machine. She can internet beautifully. But, it turns out, my machine can't access the Internet anymore so long as the Imagio's ICS is bridged to the machine's built in WiFi. Take it out of the bridge, it works on my machine but not my partner's. Put it in the bridge, it doesn't on my machine, but it does on my partner's.
Anyone have any insight as to how this can be accomplished. Imagio ICS via USB to computer A, computer A's Wifi set in ad-hoc mode to be used as a router to get Internet to computer B, both machines being able to access the Internet.
Also, USB-Modem works with ICS on the laptop, but it uses dial-up, and the problem with that is that if you stop using it for a certain period of time, it loses the connection, which can screw up things royally. ICS is much more consistent.
There has to be a way that bridging can be used without taking the Imagio's ICS out of that computer's universe.
None of this would be a problem if she got a WM phone instead of the LG Touch (which requires a hefty monthly plan to use it as a modem).
Thanks to any who know more about this than me or have some other ideas.
--
FB
You can configure ICS on the phone to use a different IP range (probably also possible on the PC but don't know how).
So then you can use Phone->ICS->USB->ComputerA->ICS->Wi-Fi->ComputerB
WMWifiRouter uses 192.168.3.x instead of .0.x by default. I think this can also be configured using ICS Control.
frankenbike said:
I figured out that using my Imagio as a WiFi Router drains the battery faster than it can charge. This is bad for a sometimes day-long connection using low bandwidth sites (live blogging for hours on CoverItLive.com).
Typically, I use the Imagio when WiFi isn't available, or is flat out ridiculously priced ($thousands in some convention centers).
I have to work with my partner, who also needs a connection, and sharing it would be oh so convenient using WiFi. So I thought, why not share my Imagio's connection by using Internet Connection Sharing on my computer through the WiFi. Not so fast: all ICS uses a fixed IP of 192.168.0.1. Conflict city when you try to use ICS twice in the same daisy chain.
"So", says I, "why not use Network Bridging to accomplish the same thing?". Well, this works in getting the signal to my partner's machine. She can internet beautifully. But, it turns out, my machine can't access the Internet anymore so long as the Imagio's ICS is bridged to the machine's built in WiFi. Take it out of the bridge, it works on my machine but not my partner's. Put it in the bridge, it doesn't on my machine, but it does on my partner's.
Anyone have any insight as to how this can be accomplished. Imagio ICS via USB to computer A, computer A's Wifi set in ad-hoc mode to be used as a router to get Internet to computer B, both machines being able to access the Internet.
Also, USB-Modem works with ICS on the laptop, but it uses dial-up, and the problem with that is that if you stop using it for a certain period of time, it loses the connection, which can screw up things royally. ICS is much more consistent.
There has to be a way that bridging can be used without taking the Imagio's ICS out of that computer's universe.
None of this would be a problem if she got a WM phone instead of the LG Touch (which requires a hefty monthly plan to use it as a modem).
Thanks to any who know more about this than me or have some other ideas.
--
FB
Click to expand...
Click to collapse
I use WM WiFirouter, it is a great program with multiple different configurations. I use it at home on an old IPAQ hooked to my PC as a wireless router so my kids can use the internet on their laptops.
WM WiFi Router was my first choice. Note the point I made that the battery drains faster than it can recharge. This becomes something of a problem after an hour or so.
Sadly, I got the connection sharing option to work now on the laptop using ICS control, but it seems to disconnect the WiFi ad-hoc network. And doesn't actually share through the WiFi. I suspect this is a problem with the way the WiFi on the laptop works, since I had the same problem with Network Bridging, and had to run a Dos script to enable the WiFi. It only works when bridging is being used, so I have to find the equivalent for when bridging isn't being used but ICS is.
I don't suppose anyone knows anything about *that*?
EDIT: I just downloaded the latest version of WMWifiRouter, which has USB connection support and seems to be a whole lot more reliable in general. AND IT WORKS with connection sharing, the laptop WiFi works as a router, and it DOES solve my problems. Thanks for the suggestion that made me reconsider it again.
EDIT +1: Still uses up the battery faster than it charges. Not as fast as WiFi though. WMWifiRouter is a pretty amazing connection sharing tool kit with USB, BT and WiFi connectivity and lots of control without the weird IP address pathologies. Amazing that it also gets around my laptop's weird connection sharing WiFi pathology as well. Another nice thing is the "keep connection alive" ping feature, and the real time power status and information. They really try to pack a lot of useful stuff for your $20.

Sprint blocking inbound ports? Want to use VNC Server over 3G/4G

IMHO a data connection I'm paying for is a data connection. I'm peeved at the thought that Sprint is not allowing outside world inbound port connections to my device (S4). I have a technically challenged mother-in-law and it'd be great if I could VNC into her device to help her.
Droid VNC Server supposedly allows this over 3G/4G and even shows my external IP address, but all connections fail.
VMLite Server ( http://goo.gl/Q14Hq ) does work, but ONLY via local WiFi.
Anyone have experience with getting this to work over 3G/4G data connection or a way around this?
Lol dude, do you think your "ip adress" is unique on cellphone? Of course not...
You are paying to have DATA in your cellphone, not a internet service. Use wifi..
armyturtle said:
IMHO a data connection I'm paying for is a data connection. I'm peeved at the thought that Sprint is not allowing outside world inbound port connections to my device (S4). I have a technically challenged mother-in-law and it'd be great if I could VNC into her device to help her.
Droid VNC Server supposedly allows this over 3G/4G and even shows my external IP address, but all connections fail.
VMLite Server ( http://goo.gl/Q14Hq ) does work, but ONLY via local WiFi.
Anyone have experience with getting this to work over 3G/4G data connection or a way around this?
Click to expand...
Click to collapse
You're doing better then I am if you have it working at all. I'm on rooted MF9 and haven't found a working server yet. Only tried the free ones so far though. May have to give in and buy VMLite I reckon.
Have you thought about using a MDM to access her device. At my job we use SOTI Mobile Device Management (recommended by Samsung), with this software I am able to remote access and control any android, ios and Windows xp-Windows 8 on any network. I have tried 3G, LTE and Wifi. Our school currently has 670 Galaxy Note 10.1 and I can control each and every one. I can remote in to the device run programs, watch videos and push out Apps silently without having to have the student login into google services. Most companies will give you at least a 2 week trial to see if you like it and that is when you can remote in to their device.
pmcnano said:
Lol dude, do you think your "ip adress" is unique on cellphone? Of course not...
You are paying to have DATA in your cellphone, not a internet service. Use wifi..
Click to expand...
Click to collapse
"Lol dude", my old Epic 4G had a unique IP, as does my partner's current Epic Touch. (So did my Palm Pre.) But the Epics are/were Wimax, so it must be that Sprint got stingy when they moved to LTE.
Sucks for me. I know there are dynamic DNS updaters... anyone know of a persistent reverse SSH tunnel app?
armyturtle said:
IMHO a data connection I'm paying for is a data connection. I'm peeved at the thought that Sprint is not allowing outside world inbound port connections to my device (S4). I have a technically challenged mother-in-law and it'd be great if I could VNC into her device to help her.
Droid VNC Server supposedly allows this over 3G/4G and even shows my external IP address, but all connections fail.
VMLite Server ( http://goo.gl/Q14Hq ) does work, but ONLY via local WiFi.
Anyone have experience with getting this to work over 3G/4G data connection or a way around this?
Click to expand...
Click to collapse
Have you thought about TeamViewer? I use that from my mobile to log into my parents computer to help them.
Setup a VPN connection and use that to connect to what you want?
Sent via mobile

Categories

Resources