I'm having a problems syncing my Athena with my laptop. It's a T-Mobile Ameo with PK3.0. I think the problems may have occurred when I upgraded to PK3.0 (about a month ago).
I'm running Vista - on two laptops, a Dell D610 and a D630. I can't sync by cable with either or bluetooth to the D630 (not supported on D610).
What happens (whether by cable or bluetooth) is often you can get the phone to connect and Windows Mobile Device Center says 'connecting'. Then I am connected - for about 5 seconds. Then, I am just disconnected.
I've tried everything - disabling advanced USB functionality, reinstalling WMDC numerous times, different laptops, bluetooth/usb and nothing's working. I suspect it happened when I installed PK 3.0 but I can't be sure. I've tried hard resetting and the 'clear storage' utility.
I have no memory card and no way of connecting a memory card to my laptop so I can't really reflash that way.
Has anyone come across this before? Do you have any ideas how I can fix this?
Many, many thanks in advance.
Do you have a personal firewall installed?
By your description looks as if you have one active. TrenMicro anti-virus instals one by default and I believe others do too.
Cheers,
--M
no no firewalls and have also disabled all the stuff in the Windows Firewall.
sorry, forgot to say that.
Had you synced before you flashed? If so, delete any existing partnerships and try again. Also, why AP3? AP4 is out now. I have had no probs syncing with either,
this is the whole point....
I can't install AP4 because I can't get the F*ing thing to connect to the F*ing computer. This is driving me up the wall, I have tried absolutely everything.
Most recently:
Bought memory card and adapter. Came to about £30 what a waste.
Put Tmobile WM5 NBH on SD card and installed that via boot manager.
Following that I could now sync by bluetooth.
But you can't upgrade the ROM via bluetooth, that must be by cable, and that's not working.
New error now though. WMDC shows connecting for around 5-10 seconds, and then tells me 'Error'. Well that's really useful.
Investigating the event viewer reveals error 0x80072745. Full log at bottom of post.
A google of 'wmdc 0x80072745' reveals lots of other people who have this problem.
The generally suggested solution is uninstall/reinstall WMDC. Well that doesn't work. (and a load of silly things like disabled advanced network functionality which ive obviously already tried).
Most people seem to think this problem exists because they upgraded to WMDC 6.1. In that case, how do I completely remove that from my system? Obviously not just uninstall restart etc.
No-one on the internet seems to have yet found a solution to this. All the forums end with 'I still haven't sorted this'. I really hate Microsoft. Its over 6 months since they released 6.1 and STILL NO FIX??!
And I can't even decompile the 'athena updater' EXE file to get the NBH for AP4 and put that on an SD card because according to the wiki, the SPL structure is changed for the upgrade to AP4 and obviously I can't do that by myself and presumably it is not the NBH that controls this but some other part of the .exe package.
GRRR all I want is AP4.
Please, anyone any ideas?
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
+ <System>
<Provider Name="RapiMgr" />
<EventID Qualifiers="49152">8</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2008-05-09T18:30:17.000Z" />
<EventRecordID>4724</EventRecordID>
<Channel>Application</Channel>
<Computer>DaveD630</Computer>
<Security />
</System>
- <EventData>
<Data>communication (0x80072745)</Data>
</EventData>
</Event>
Like Confusious said, if you where syncing before you upgraded, then you will need to delete all partnerships, and then set them up again.
out of all the roms, I used 6.1 the longest, with no problems
I'd tried that as far as I could.
Problem now solved!
Thanks to this genius:
http://www.tech-archive.net/Archive...lic.pocketpc.activesync/2007-09/msg00101.html
I'm not sure if doing all these manual steps helped to delete partnerships properly. I'd tried as far as possible to do this already, by deleting c:\windows\windows mobile, but I hadn't looked at the stuff in reg edit or in c:\users\dave\appdata\.....
So perhaps that solved it. I think more it was a problem with WMDC 6.1 as a search for 'wmdc 0x80072745' in Google reveals everyone moaning about 6.1.
Anyway hopefully this will help anyone who has this problem in the future - I had tried literally everything (like you probably have so far) and this really worked.
You need to download WMDC 6.0, the link at Microsoft is:
http://www.microsoft.com/downloads/...EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
(you can check with install file you have easily, as 6.0 is 10.3mb and 6.1 is 12mb).
Thanks to everyone for their help. I love the way how when MS release an upgrade it is breaks things for so many users (but yes I'm sure things are fine for others...).
Sidenote: AP4.0 seems verrrry slow at writing text messages. I wonder if it's snapvue that's slowing it down (seeing as that was designed for the shift).
Related
Hi. This has worked for me, and solved a massive problem. Hope it helps someone else too.
Step 1:
Ensure you are trying to fix the same problem as I was by looking at the symptoms, which were:
- HTC Wizard synchronizes OK when you plug it in the first time
- It stays in sync if you leave it plugged in
- If you unplug it and then plug it back in at any time later, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync
- If you unplug it and soft reset before reconnecting then it's fine
Essentially, the Wizard was requiring a soft reset between every connection to the USB cable, or it would crash and require a reset anyway!
These issues have been discussed in about 10 threads on this board, and on pretty much every other resource for Wizards and Pocket PC devices on the net. I was, however, totally unable to find something like this which directly addressed the problem.
Step 2:
Download a program called Dr. TCP from here: http://www.dslreports.com/drtcp
Run it to open a dialog box with loads of fields with strange techy names... no, i didn't understand it either. However, I've been searching the net for days and I found an article here: http://www.pcworld.idg.com.au/index.php/id;504222574;fp;2;fpid;1277378924 which told me how to work the numbers out...
In the bottom drop-down box, select "Windows Mobile-based Device" and enter 1492 in the box next to that. That's your maximum "MTU".
Here are the settings which work for me (from the top). If i don't mention a setting, I didn't change it!
Tcp Recieve Window: 261360
Dial Up (RAS) MTU: 1492
Path MTU Discovery: Yes
Save and Exit Dr. Tcp.
Step 3:
You need to open "Network Connections"... in XP, that's Start > Connect To > Show All Connections. I'm sure you can find it yourself. Anyway there should be an icon called "Local Area Connection (x)" with "Wireless Mobile-based Device" written in grey underneath.
Right click on that and select DISABLE. This will close your USB connection to your Wizard so those MTU settings can be applied.
Now unplug your Wizard from its cable. Here, I tried right clicking on the connection and selecting "Enable", but it just errored. So you need to unplug it.
Step 4:
Reconnect and see what happens. I am now happily disconnecting and reconnecting as many times as i like and it just keeps on synchronising itself. MAMMA MIA!
If this solves your nasty "i need to reset every time I disconnect" problems then please post here to say so. If it doesn't work then post here also, I guess. If this is a solution for you then credit for this is not mine - it's just the sum total of a lot of searching across this and other forums, websites and message boards. THANKS!
not working
These steps did not work for me.
I still have to reset the device otherwise I get this message after about 5 minutes.
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
It appears to be only a problem syncing as I can still explore the device.
well...
...that's depressing. I genuinely thought that would work for other people too.
Did you read that PCWorld article I linked to? it explains how I got those numbers... they could be different for you, perhaps?
I'll keep thinking...
I did not look at the article. I'm having other issues trying to get my 2 computers synced with my mobile device http://forum.xda-developers.com/viewtopic.php?p=234189. Once I get those resolved I can try some different things.
On my home computer I am only synchronizing favorites and files and it doesn't appear to be a problem.[/url]
Oh right ok. I read your other post too, but I only have 1 PC for home and work so i can't help with that.
Has anyone else tried this?
I am no longer having the problem since I fixed my other sync issue (multiple computers issue). I had reinstalled activesync and did a hard reset on my device so maybe something else got cleared up. I am also having much better luck with the way my device is running. Before I was getting frequent slowdowns and lockups. I am a much happier customer and will be sticking with my cingular 8125. I just love all the features, but the activesync issues and slowness was starting to get to me. I'm so glad it is all behind me now and I can start to really enjoy the thing. Although I have yet to connect my bluetooth headset, that may have caused me issues too. Sorry I couldn't be more help testing this out.
I and a work college have had this problem on both our systems and found that it was being caused by Avantgo.
It would work fine and sync every time for days until we installed Avantgo.
After these we both had the symptoms you describe in the first post until we did a hard reset and re installed everything except Avantgo, it was then fine again. As a test I then reinstalled it and it started not syncing again, my college who has not reinstalled it has had no further problems.
I have now been running for 3 weeks with no problems and no Avantgo.
If you have it installed it may be worth trying it without for a wile and see if it helps.
Didn't work for me. Still no connection when plugging in for the 2nd time. MTU value changes back to blank when opening the Dr.TCP again, the other values are ok though. But thanks anyway for the hints!
Greetings,
Andreas
Didn't work for me neither...
just to check (i know this sounds daft) but you did DEFINITELY press the SAVE button in Dr TCP before you pressed the EXIT button? can't imagine why it wouldn't store the data.
aaaaaaaaanyway i guess it's not the ubersolution i thought it was
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Any updated? I'm having this same problem, except my device won't connect at all! Even after a reset. It connected once and that was it.
Hi Silentz,
sure, I saved the settings. I'll try the ActiveSync clean install-method and report the results. 'Hope that MS will put out an update or better version soon! Rumours out there?
Greetings,
Andreas
tried and failed...
tried the above TCP solution- Not working for me either...
Found best solution. Go try the latest imate rom. You can then plug out/in the cable as many times as you want & it'll just work fine.
Bebbo said:
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Click to expand...
Click to collapse
It seems to be as soon as you access the internet through the passthru connection on Activesync. So installing AvantGo/PocketWeather might explain this to a certain degree as they may be accessing the internet.
Incidentally, how could Microsoft have stuffed up so badly with Activesync? It's a tiny program but works so badly - Couldn't a third party come up with a different version of Activesync or something? I'd pay for it if it worked better than this crock!
Just for info, the latest iMate ROM (With Push Email) does indeed seem to fix this issue. Obviously it was with the WM5 side rather than anything that could be fixed on the PC side.
My Active-sink probelms disappeared since upgrade to the latest iMate ROM. Has been working like a charm with all apps and utilities installed, Tweaks2k2, Spb Pocket Plus, Pocket Informant, Worldmate Pro, etc...
told you it works
cheers
I am running the 2.08 (Qtek test) rom and have this issue since last friday. before that never had it!!
What I changed on thursday was: enable exchange server sync and use it. because push-email si no solution for me I just disabled it and dropped the association.
Then (on friday) the trouble started.
I tried DrTCP...and ended up with a broken netlogon (secure client) service on the pc. The IS solution for that was a new image . . thank you very much.
I am back on track with the pc now, but AS still slows down my device.
Are any of you having this trouble using or have used:
-Push email
-Blackberry
What is the amount of free program memory on your device? Mine is around 6MB (probably caused by Blackberry install which I cant remove). . . .
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
Hi all.
I had ActiveSync setup back in California on my computer, but now that I am at my parents place and have been trying to setup activesync on there computer to sync with my mda.
I had no problems back in Cali, but now when I load ActiveSync and connect the device, etc. it says that device is not connected and therefore I cannot sync. When I plug the device the computer recongizes that there is a windows mobile device, and ActiveSync tries to connect but with no success.
Does anybody know what I should do to fix this problem? I've searched and haven't really found anything specific to my problems, and I really need to be able to sync my mda for I won't be going back to my computer for a while.
Thanx alot
peter
I'd suspect a firewall issue. Use this guide from Microsoft to troubleshoot ActiveSync 4.0/4.1/4.2 USB Connection Troubleshooting Guide
Good luck!
I've already troubleshooted, and we're talking about the firewall for my internet, right? Because if thats the case I've already disabled the firewall for all of my connections. Would there be other types of firewall that I should be aware of?
*I've tried it on another computer in the house, and I get the same problem. It recongizes a windows mobile device is connected, but it won't pick up the usb connection through activesync.
Thanx again
I am having the EXACT same problem... Does anyone know how to fix it???
Does anyone know how to fix it???
i m having the same problem
hi
i upgrade form 1.6 to 2.2, rom available at t-mobile
its fast but active sync turns green then turn off
nothing happenes
the older 1.6 rom was workin fine
well im still having this problem, so if anybody knows who how to fix it im in need of help.
btw... i haven't upgraded my rom yet.
thanx alot
try file/delete mobile device in activesync and see if it still does it.
Anymore tips??? I havent been able to sync for 2 weeks now!!!!!!!!!
I am having the same problem with my MDA. My 8125 never had this problem its quite the PITA.
May not help...
You may have already tried all this...
First, don't use Activesync 4.2. Uninstall it, reboot, and install 4.1. I couldn't get sync with two PCs with 4.2. Removing it is a nuisance since it starts automatically and doesn't have an off selection; I use activesynctoggle.exe to turn it off. I keep activesync around since activesync problems sometimes can be fixed by turning it off and on again.
Second, if you are running zonealarm or another firewall, the procedure for permitting sync is more complicated; see e.g.
http://www.pocketpcfaq.com/raj/ZA.html
Third, remove the connection from the PC (on activesync, File/Remove Connections) and from the PPC (run activesync when not connected and remove), remove activesync from the PC and reinstall, and start fresh. Use a USB cable and don't mess with Bluetooth -- it is *much* more sensitive, as I found out painfully.
Good luck. It is really amazing that microsoft can't make software that syncs two microsoft operating systems, when Palm can make software that syncs windows with the palm OS reliably. Activesync is one of the worst programs I have ever encountered, and the release of 4.2, which seems to work less well than 4.1, is astounding.
Well my device stopped recognizinig my sim car yesterday so my device is worthless.
DOES ANYONE KNOW ANYTHING THAT CAN HELP!!!!?!?!?! I HAVENT SYNCED IN 25 DAYS!!!!!!!!!!!!!!!!!!!
PLEASE HELP!!!!!!!!!!!
A little more info please. Saying you have the exact same problem isn't enough! (trust me, no two people or computers have the same problems, exactly)
Please post what you're doing, AS version, ROM version... actually anything that might help us possibly help you.
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
ROM version 2.25.11.1 WWE
ROM date: 5/11/06
Radio version 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102
Did you even try the suggestions I made?
Rjp20 said:
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
Click to expand...
Click to collapse
I have had a similar problem and solved it with those procedures. Activesync is unreasonably sensitive and sometimes removing the program and connection and starting over seems necessary; then it will work until some setting or other gets messed up.
I'm having a similar issue but when I connect my T-Mobile Vario II (HTC Hermes) it starts the process but as soon as it's about to start syncing my PC reboots. I've just got a new laptop and it syncs fine. I've been using ActiveSync for many years and this is the first time I've had this issue. I've also got an Orange SPV C500 (can't remember which HTC device that is) but it's a smartphone and it still syncs fine.
I don't have any software firewall enabled as I'm behind a hardware one. I've looked round the web but no-one seems to have this issue that the system reboots.
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Thanks in advance,
Rob.
I also had a no connection when I first connect to new computer....
Check the network connections, there should be a new network connection created for the computer/pda, check the properties and make sure all checkboxes are selected.
Mine wasn't ticked in the beginning, and was able to sync after I selected all the boxes...
WeeeRob said:
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Rob.
Click to expand...
Click to collapse
Windows XP has an event viewer (Control Panel/Administrative Tools/Event Viewer) that can probably tell you what took down your system. That would help isolate the problem - maybe.
Nothing so far... Does anyone else have any tips...
My ActiveSync will no longer display the "Windows" folder for my Cingular 8125, so I can't add/drag and drop files directly from my computer to that late, great aspect of 'ActiveSync".
egavac said:
My ActiveSync will no longer display the "Windows" folder for my Cingular 8125, so I can't add/drag and drop files directly from my computer to that late, great aspect of 'ActiveSync".
Click to expand...
Click to collapse
what version of activesync? you might need to reinstall.. have you rebooted the computer?
reply
ActiveSync 4.5.0 (Build5059) Beta, but the same thing happened with Version 4.2.....and, yes, I rebooted several times.
have you by chance installed WM5torage? also what rom are you using? maybe you need to use the usb switch in the programs menu (one of the folders, its been a few roms ago for me, change it from serial to rndis? or maybe your rom has the USB to PC setting in the connections menu, try changing that? try a different usb cable? or maybe try a different usb port? or my last idea.. try a different computer to isolate whether its the phone or pc... after that i am out of ideas, lol
Thanks
Wel, I ran into a host of problems, and am in the process of re-installing programs after a destructive reinstall of WIN-XP. I read on the microsoft WINMOBILE-5 Site, that a firewall could be the problem, but the ordeal of gruelling through what seemed to be life disrupting barrier seemed too much. I had Verizon Internet Security Suite, and after Windows reinstall, the Windows-Folder for WinMobile5 in ActiveSync displayed, so my favored apps are almost installed. When I have time, I'll look to investigate the advisories you kindly sent. (I still don't know what caused the disappearance of Windows for WM5 in ActiveSync) Looks like I'll have 3 or 4 hours sleep if I'm lucky.
egavac said:
Wel, I ran into a host of problems, and am in the process of re-installing programs after a destructive reinstall of WIN-XP. I read on the microsoft WINMOBILE-5 Site, that a firewall could be the problem, but the ordeal of gruelling through what seemed to be life disrupting barrier seemed too much. I had Verizon Internet Security Suite, and after Windows reinstall, the Windows-Folder for WinMobile5 in ActiveSync displayed, so my favored apps are almost installed. When I have time, I'll look to investigate the advisories you kindly sent. (I still don't know what caused the disappearance of Windows for WM5 in ActiveSync) Looks like I'll have 3 or 4 hours sleep if I'm lucky.
Click to expand...
Click to collapse
i always forget to mention a damn firewall, lol
I've been successfully synchronizing with two PCs for the better part of a year. Last week, with no obvious change in software (but there were some XP updates), synchronization quit working correctly. The symptom is that when I go back to a PC I have already sync'd with, activesync doesn't recognize the existing partnership and insists that I delete one of my two partnerships. If I do this, say at home, it will sync fine, but then when I reach the office, activesync doesn't recognize the existing partnership there. I am not running exchange on either machine. I run zonealarm pro with the standard fix that has worked fine, and nothing on any machine changed except standard updates.
I'm using Activesync 4.1 because when I tried 4.2 when it first came out, it didn't sync properly, and running the stock t-mobile 2.6, but without most of the extended ROM items.
Any ideas would be appreciated. I have not yet tried the hard reset with a fresh install of activesync that some advise, but did change the
HKEY_CURRENT_USER\Software\Microsoft\ActiveSync\EnableNonLocalCrossPollination
to one, which doesn't seem to have fixed the problem.
Trying 4.5
I installed activesync 4.5, first by deleting both partnerships, then stopping and uninstalling activesync on both pcs and deleting the activesync file in program files, then installing 4.5 and syncing. Now both have partnerships, and I'll know in the morning if that cured the problem.
SidebySide Errors and Fix
I looked in the Event Viewer under administrative tools, and activesync was generating a list of about twelve "red X" errors, all of the form
Dependent Assembly Microsoft.VC80.MFCLOC
called by something called SideBySide. A quick search turned up this fix:
http://support.microsoft.com/kb/923014/en-us
and the installing of the download under Resolution eliminated the errors. I don't yet know if this is connected to my activesync partnership problems.
Solution!
This seems to be a complete solution: renaming the device.
http://www.cellphonetalk.net/viewtopic-146185.html
Help!
None of these solutions has fixed the problem! Has anyone figured out a solution that doesn't involve a hard reset?
Another solution
This doesn't work for me because no mobile device shows up under network connections:
Sometimes the Windows device manager recognizes the Windows Mobile adapter but Activesync does not recognize the device. In that case, go to Start—>Control Panel—>Network Connections. Look for the Windows Mobile adapter. Right click on it and go to properties. Under “This connection uses the following items” make sure 1) TCP/IP, 2) Client for Microsoft Networks and 3) File and Printer Sharing for Microsoft Networks are selected. If not, just select them and hit OK. Activesync should recognize the device.
Frustrated
Well, I couldn't get this to work. Finally I did the hard reset. The good news is that I was at 99% functionality in under an hour; the remaining was the odd tweak I didn't have in my list, most of which I did when I had a minute otherwise unoccupied.
The hard reset seems to have fixed the problem. But what a nuisance! And still no glimmer of an idea as to what causes it. If anyone has a theory, I'm curious.