Hi! I'm new to the WM world and still getting to know my HTC Touch Dual. So please excuse any ignorance on my part! Been searching the web and this forum but can't seem to find anyone else with the same problem, would someone be able to help, please?
Am trialling the Listpro app and like it except I'm unable to figure out how to enter text entries from the 12-key keypad itself. Listpro only allows me to enter numbers when I use the keypad, and I'm only able to enter text through the touch keyboard with a stylus.
Does anyone know how to make the 12-key keypad work for text-input as well on Listpro? I can't seem to find any menu options/ settings in the app for this and wondering if it's just inherent in the program or if I'm just clueless.
Appreciate any feedback, thanks!
Related
I have this perfect model, but one big problem with t9 entering text. I need disable this funkcion for ever. Can somebody advice?
Hey, I am having the same issue. It always tries to predict / complete my words but it never does it correctly. I have changed it to stop doing it in both the Touch Keyboard settings and the input settings.
Any guidance would be helpful.
This will disable T9 but...
HKLM\SOFTWARE\Tegic\eT9\ and change the key "XT9SupportMSSip" from value "1" to "0".
... I did this as well as disabling the HTC built in keyboards via SKTools. I also installed 'PCMKeyboard' and 'IM selector' (To set PCM as the default).
In doing all of this, now on reset, one of the HTC keyboards still looks like it's default and I do not get predictive text anymore. Meaning that if I start a new email or sms, enter a letter in the 'To:' field, it wont suggest a contact.
I really haven't poked around as to what is going on so I'm living with it because I like the PCM keyboard to much.
Any help would be great. Thanks!
Your registry advice is not working on my device.
I obtained this reg suggestion through a thread in the 'elf' forum. I needed to use it to enable 'PCMkeyboard'. Sorry, I can no longer find the thread I was reading. You may want try and search for some clues there.
try this
try this
i think it will fix the problem
Hi GUys
The cab file works fine so well done.....
However if you are looking to use your keypad to msg[without T9] it wont work as the file disabled the use of letters, only numbers now work
Any chance that T9 can be turned off and still be able to use keypad to msg as normal.........
Thanks
Has there been any progress on this???
I'm tired of typing using the keyboard, along with the touchscreen and suggestions being made, then if i'm not looking, i press space and it adds the damned suggestion onto what i've typed (for instance: twotoo / memean)
Very annoying when trying to type a text quickly and sneakily in work, as i've got to focus on the text and not who's around me!
If it can be switched off, I would highly appreciate it, I can't find it in the Advanced Config Tool, or under any of the settings.
Thank you,
Hate to do this, but any ideas anyone???
Thank you,
I have been searching everywhere for a utility that lets you text message with the Dialer, rather than the keyboard (Sort of like a regular cell phone - where you dial 2 (for A) and 8 (for T). Something that would be used to send a text without opening the slide out keyboard or with one hand only? Can anyone point me in the right direction?
Meadow said:
I have been searching everywhere for a utility that lets you text message with the Dialer, rather than the keyboard (Sort of like a regular cell phone - where you dial 2 (for A) and 8 (for T). Something that would be used to send a text without opening the slide out keyboard or with one hand only? Can anyone point me in the right direction?
Click to expand...
Click to collapse
Try searching for the HTC Touch Keyboard and Keypad. It is the software that is used on the touch that enables a qwerty and a t9 function on your screen when typing.
http://htc-touch-keyboard.en.softonic.com/pocket
This website has it but I havent tried this software out. I have one that I download from these threads but I dont have it with me. If you still want it PM me and I will send it to you later on today if the one on the link doesnt work.
The Touch Dialer was still available and it works great.
Thank you!
Hello. On the samsung i760 the front keypad does not have any sort of t9 mapped to it. This was a function that alot of us expected and I was wondering if its possible for someone in this forum to pull the feature off your phone and put it into a .cab file(donations would be made!!). I am not sure this is even possible but Im trying everything. Thanks
The reason we got devices with the form factor of front 12 key and slider QWERTY is because sometimes we don't need to type out a full message and T9 does fine on the front keypad. I can't see why there is any good reason for Samsung to have left this functionality out. What a dumb idea.
anyone please?
bump please?
anyone please?
I would love to see T9 on it also, but I dont think there are many working on the i760. Samsung isnt as easy to hack as HTC.
My two Himalayas (HTC) don't even have T9 predictive text on it. Does your phones at least have auto correcting text? IE if you type "Youre" and press the space bar does it turn into "You're" or "Teh" into "The"?
Yes it the auto correct and predictive text
I lost those features after installing and then un-installing the Diamond keypad.
You could hard reset...
hard reset and backup brings out the files. The issue is the backup also has the issues as it is in the registry.
Now that alot of people have Windows 6.1 on their i760's now, does that make it any easier to hack or add t9, or does that not change a thing.
Have a look at the demo of this... tell me if it helps at all...
http://free.tengo.net/
hi,
i can no longer type in the name of someone i want to send a text message to and have a list of potential matches pop up - i'm having to start typing and then use Check Names. anyone else having this issue or does anyone know of a fix ?
it's the HTC keyboards which have done it, either uninstall them or wait for someone to suss out a fix.
thanks again.
funny... i have the htc keyboards installed and it gives me suggestions when i start typing a name
Does the HTC Keyboards program also disable the umlaut/accened characters key on the keyboard?
Yes, it disables the accened characters key, does anybody know if this setting is in the registry?
Hiya xda, longtime reader and I am greatly in debt to you all for your insight into how to best get my Mr. Pocketphone awesome.
So, I have myself a Touch HD and am using Dutty's 3.9 which uses Touchflo 3D 2.0
The input menu on touchflo by default displays only three inputs when you pull it up. The first two are static: phone keypad, and full qwerty. The third one you can change by pulling up the "other input methods" option and selecting an input.
My question is: is it possible to change the first two static input options to something else with a registry tweak or something? I dont really use the phone keypad and would like to replace it with another one I regularly use so I dont have to go to the other input methods menu so often.
I have searched and searched, but cant seem to find an answer.
Any help you guys could provide would be greatly appreciated.
sealedhuman said:
Hiya xda, longtime reader and I am greatly in debt to you all for your insight into how to best get my Mr. Pocketphone awesome.
So, I have myself a Touch HD and am using Dutty's 3.9 which uses Touchflo 3D 2.0
The input menu on touchflo by default displays only three inputs when you pull it up. The first two are static: phone keypad, and full qwerty. The third one you can change by pulling up the "other input methods" option and selecting an input.
My question is: is it possible to change the first two static input options to something else with a registry tweak or something? I dont really use the phone keypad and would like to replace it with another one I regularly use so I dont have to go to the other input methods menu so often.
I have searched and searched, but cant seem to find an answer.
Any help you guys could provide would be greatly appreciated.
Click to expand...
Click to collapse
Use the following app SIPChange
Once installed, open up SIPChange and then select whichever keyboard you want to use as default. Now, even after a reset your choice will be default keyboard.
Thanks for the reply. I guess I should be a little more clear though.
I found this solution in the forums already, and thats not exactly what I want to do.
I want to change entrys that pop up when you tap the little arrow next to the keyboard on the bottom of the screen to bring up the entry menu.
On regular Windows mobile when you bring up the entry menu it just lists all the inputs you have installed on one long panel, but on Touchflo 3D there are only three inputs that appear, then to select additional inputs, you must click on the "other input methods" menu option.
My question is: Is there a way to substitute an input from the "other input methods" menu with one on the main input panel?
Of the two that are there by default on the main input panel I only use one, so i would like to substitute it with another input that I use more often, thus saving me the time of having to click the little arrow, then other input methods, then the input.
I guess this is a touchflo 3D specific problem. so i dont know if any registry tweak would fix it. Any help would be great though.
anyone know how to do this?
change order of the input menu entry's?