My O2 mini is currently working ok with a 1GB SD card. However when I try to use a 2GB SD card, it always pops up the message "Do you want to try to format this storage card to make it readable? This will permanently delete any files on the card. Yes. No."
After I go ahead and format it, it says "This storage card has been successfully formatted". But the card does not show up in File Explorer. Also on removal and re-insertion of the card it shows the Formatting message all over again and again. This card is a "MyFlash Turbo" Card purchased from Singapore and it works perfectly fine in my USB card reader. I've tried copying files onto the card using the card reader. When I load this card in my O2 mini it again pops up the formatting option. When I format it in the O2 and try to read it through the card reader, the windows OS now tells me that this card is not formatted.
I don't know what to make of this. Can any one give me a solution to make the card recognized by my O2 mini?
Best Regards
same problem here bought my card in singapore too... some people have reported it to work. Would appreciate if someone could figure it out.
Maybe it's a specific brand that does not work?
Jainoxi said:
Maybe it's a specific brand that does not work?
Click to expand...
Click to collapse
Well that's what I thought, but this card seems to work ok through the card reader so I can't figure out if it's card or the xda mini which is at fault ??? Meanwhile my xda mini accepts my other cards. Any one has any clues as to what might be the problem ?
samiranm said:
My O2 mini is currently working ok with a 1GB SD card. However when I try to use a 2GB SD card, it always pops up the message "Do you want to try to format this storage card to make it readable? This will permanently delete any files on the card. Yes. No."
After I go ahead and format it, it says "This storage card has been successfully formatted". But the card does not show up in File Explorer. Also on removal and re-insertion of the card it shows the Formatting message all over again and again. This card is a "MyFlash Turbo" Card purchased from Singapore and it works perfectly fine in my USB card reader. I've tried copying files onto the card using the card reader. When I load this card in my O2 mini it again pops up the formatting option. When I format it in the O2 and try to read it through the card reader, the windows OS now tells me that this card is not formatted.
I don't know what to make of this. Can any one give me a solution to make the card recognized by my O2 mini?
Best Regards
Click to expand...
Click to collapse
that's mean the SD card is not compatible with magician. I also got the same problem with only 256mb SD card. it's probably running on a not compatible frequency with magician.
My SanDisk Ultra II 2gig card from MobyMemory works perfectly
frendrick said:
that's mean the SD card is not compatible with magician. I also got the same problem with only 256mb SD card. it's probably running on a not compatible frequency with magician.
Click to expand...
Click to collapse
Running a different frequency? I thought there was a SD compatible format, and that all SD card are made accordingly...
I had the same thing with my Sandisk Ultra 2GB. What I did was pair the device with my laptop and explor to the SD card via the explorer in Activesync. I then created a folder called Temp. After I did this, the file explorer and magician would see the card with no problems.
Hope it help
-M
I have exactly the same problem with the MyFlash (AData) 2GB as well on my O2 Mini.
Swap 3 cards already (different batches) and all had the same problem.
I've experience problem copying files to it from my laptop as well. I used a USB2.0 SD reader/writer and copied a large 900MB file to it - got the following error after a while:
Windows Delayed write error. Path is too deep
My Explorer hangs from that point. Same thing happened for all 3 cards.
I'm staying away from this AData 2GB for now.
cheers,
Patrick
Fresh Freddie:
What the price Sandisk II Ultra 2 Giga ?
sd card problems
Price: £131.99 (£131.99 Inc. VAT)
Thanks Bushmen.
Their own brand for £99.99 incl.VAT !
http://www.mobymemory.com/HiSpeed_SD_Memory_Cards.asp
Caution : further to my last post :
http://forum.xda-developers.com/viewtopic.php?t=25289&highlight=
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Any comment welcome... or should I just get a 1gb card?
Has anyone successfully used Adata 150x 1gb sd with their MDA Compact?
Thanks.
plt,
have you tried the trick that Mashie mentioned?
Mashie said:
I had the same thing with my Sandisk Ultra 2GB. What I did was pair the device with my laptop and explor to the SD card via the explorer in Activesync. I then created a folder called Temp. After I did this, the file explorer and magician would see the card with no problems.
Hope it help
-M
Click to expand...
Click to collapse
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Click to expand...
Click to collapse
I've had the same problem with this card on my JAM- simply does not recognise it at all (therefore cannot even try Mashie's method).
Tried it on my mate's XDA ii and it works straight away (ended up selling to him). What is it with these not supporting particular 2GB cards.
I think as a rule of thumb, those 2GB card which are 60x speed should work:
Sandisk - probably not the Extreme III
ATP 2GB
PNY 2GB
All of these are far more expensive than the Adata and others from the far east.
plt said:
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Any comment welcome... or should I just get a 1gb card?
Has anyone successfully used Adata 150x 1gb sd with their MDA Compact?
Thanks.
Click to expand...
Click to collapse
ADATA My Flash 1GB card doesn't work as well.
Have you tryed to format the card with your SD-Reader card? or best install Pocket Mechanic and try format with some other FAT options.
Good luck!
I bought an ADATA myflash MMCplus turbo 2GB 200x from us and it worked out of the box on my magician .109€.
I bought an ADATA myflash MMCplus turbo 2GB 200x from us and it worked out of the box on my magician .109€.
Click to expand...
Click to collapse
The only obvious differences between this one the other ADATA one is that this one is MMC and a faster speed.
Still strange that it does work (or why this one works and not the others).
I have ordered yet another 2GB SD; will post to let you guys know if it works or not.
ok, i just purchased a 2gb sandisk mini sd card and when i put it in, the device detects it.
when i try to send files to the card via activesync, it doesnt work.
when i try to format the card with the SD card adapter in my laptop, it doesnt work either.
am i missing something? thanks.
blazin-asian said:
ok, i just purchased a 2gb sandisk mini sd card and when i put it in, the device detects it.
when i try to send files to the card via activesync, it doesnt work.
when i try to format the card with the SD card adapter in my laptop, it doesnt work either.
Click to expand...
Click to collapse
I have a 2GB Sandisk in my Cingular 8125 and haven't had any problems with the card. I've had some problems with the phone, but not the card.
You should return/exchange it.
Fairly common prob with the 2gb cards,esp the sandisk - try formating the card fat16 on your device, with storage tools or sktools (google both) demos will format your card.
All,
I have a 2gb Sandisk Mini SD Card in my Qtek 9100 and up until today its been working fine. However my Qtek started to behave strange today and suddenly would connect to my pc via ActiveSynch nor could it read the sd card.
Well in fear of loosing all my stuff on the sd card I tried in other phones, on another pc, in my camera....jsut to save it but I couldnt.
I ended up doing a hard reset of the Qtek since I couldnt solve the ActiveSynch issue and now its up and running.
BUT.....my SD card is only on 1gb now. :-( So what can be done ? Format it....yup but I dont have any program to do it with....
Help help help....the next step is to send the sd card back to the company I bought it from but then I'll have to wait for a new one
Please help
Jakob
Well I have just formattet the storage card with StorageTools and when I have the card in my qtek it shows 1gb
But if I put it in my camera and then connect it to my pc I see 2gb....
i had problems on my card and formated using wm5torage from the desktop...and it is working flawlessly, i suggest to do that...but usually that size problems happen in fake cards...do u filled the card some time or at least passed the 1gb limit?
Hi All
Can someone please suggest me some steps that i can try to get my data back from my SD Card?
I only took out my Card and put it in back again and hells the phone does not detect my Card anymore. I tried few simple steps however still does not fucntion.
Can someone please please let me know what all i can try and incase if i need to format please load a good software to format my memory card?
Waiting for suggestions!!
try this.
try using another sd card...if it recognises it....its confirmed that there is no hardware issue.
then put in your own....which sd card are you using?....storage???
karan999 said:
try using another sd card...if it recognises it....its confirmed that there is no hardware issue.
then put in your own....which sd card are you using?....storage???
Click to expand...
Click to collapse
Its a Kingston Micro SD 2 GB Card.
Have you tried any other card in GENE?
First try any other card.
Then try your card in any other phone.
how come mico SD
hi
u said Micro SD u mean u are using the same with an adapter cause my friend had a problem with the SD card adapter chek the same or try using an ordinary SD
good luck
salim1001 said:
Its a Kingston Micro SD 2 GB Card.
Click to expand...
Click to collapse
When i put the micro sd card in the phone it wirte me ''Blank SD card''. please help, I tried almost everything i format the card in the phone and it dont work i did it in the PC and it wasnt woking to, i tried to change a card and it doesnt help..the phone is new and all the cards work in ather android phone. please some help!!:crying:
dan12001 said:
When i put the micro sd card in the phone it wirte me ''Blank SD card''. please help, I tried almost everything i format the card in the phone and it dont work i did it in the PC and it wasnt woking to, i tried to change a card and it doesnt help..the phone is new and all the cards work in ather android phone. please some help!!:crying:
Click to expand...
Click to collapse
well, is the SD card blank? And are you sure the SD card is completely pushed in until it clicks?