Hello,
I am having a problem with my JasJar SPV M 5000
I did a hard rest and it says: "press 0 to restore factory default
Press x to exit"
I pressed 0 and I got a massage: "clearing now" that despaired immediately and the screen becomes black.
Please advice.
Thanks
Lidan
LOL I would like a massage too everytime I Hard Reset my PDA..!
BTW try reflashing your device.
it will not reflash!!
i did flash it but it didnt help!! it will not reflash!!!
what do i need to do if i dont have anything on not the boot loud with the seril are USB on ???
thanks
lidan
Did you try http://forum.xda-developers.com/showthread.php?t=289325
i have lookt on it but iam with a problem with the boot loud that is not on screen !
i dont get the boot loud as i do the hard rest and i have lookt at the link you sant me but all the problem is the the Serial v1.01" screen is not thare as i do a hard rest so as it is on hockt on my pc i run the flash upgred and it cant do any thing as it cant see my Jasjer
all the info on the link thay say abut all of this hoo have the Serial v1.01" screen on as thay use this tool mtty1.42 i dont have the Serial v1.01" screen as i do the hard rest to restore factory default it becomes black
and no Serial are usb v1.01 thats it ! can i fix the boot loud so it will come beck on screen ?
thaks agin for the help
Lidan
Related
hi all , need help for fix error .
I have upgrade my qtek rom to o2 exec rom with ma_ui, the process end without problem .
After cold reset the screen freeze on splah screen O2.
Try hard reset with key left , right + reset confirm restore factory default ?
try YES Clearing
Reboot but screen freeze anyway
WhY??? :evil:
the device is lock on the O2 splash screen!!!!
help for reflashing device !!!
piero60 said:
hi all , need help for fix error .
I have upgrade my qtek rom to o2 exec rom with ma_ui, the process end without problem .
After cold reset the screen freeze on splah screen O2.
Try hard reset with key left , right + reset confirm restore factory default ?
try YES Clearing
Reboot but screen freeze anyway
WhY??? :evil:
the device is lock on the O2 splash screen!!!!
help for reflashing device !!!
Click to expand...
Click to collapse
what kinds device you had ? do you used noid.exe to flush ?
connect your ppc to pc and flush again
i have qtek 9000 as htc universal , the ppc is connected to pc. new hardware found but windows dont recognize the hardware!. also noid.exe don't find the hardware for flashing..
piero60 said:
i have qtek 9000 as htc universal , the ppc is connected to pc. new hardware found but windows dont recognize the hardware!. also noid.exe don't find the hardware for flashing..
Click to expand...
Click to collapse
Try to soft reset , just push reset buttom
hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
biker200 said:
hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
Click to expand...
Click to collapse
Try this:
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
I also had this once when I bodged up a custom ROM and just reflashing with a known good ROM sorted it out, must have been lucky there.
Good luck.
thank you very much what solve the problem is bl update 1.2
thank you very much what solve the problem is bl update 1.2
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
or
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Hi there a big thanx to you for doing this for me this works great im so happy now.The 1st link is the 1 that work better for me.Its still loading up all the softwere onto my mda pro if ive got anoth problem ill get back to you.What a great site.You have just made my day.Thanx mono33
PS Im so sorry if i posted this in more that 1 place on this fourm but i did not know where to post it.
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari
Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader