Related
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
bamse said:
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
Click to expand...
Click to collapse
Hi,
Seems like you are another of the many victims who got problems
after trying to upgrading new ROM & Raidio stack. Hope you still
got that warrant and get it replaced with a new one. Otherwise
you might have to try what some crazy guys do here trying to fix
it by doing all sort of bootloader etc.. Hope those who are trying
to get the upgrade ROM and Radio stack be very careful and make
sure your device are from the same supplier or distributor where
you got the new upgrade. Otherwise it will be screwed. Dont learn
your lesson the hard way.
same problem here.
i've got the O2 NL XDA
downloaded the 3.15 and radio updates from O2 NL website
installed updates as per instructions
1st update went without a hitch
2nd update totally screwed my xda.
now it takes a long time to start up, and when it does it just displays a white screen with a blue taskbar.
tried the bootloader way of flashing the rom, but still no luck
luckily I can send it back in to O2 to have it fixed.
I may try to do it by backup up another XDA, and reflashing mine.
Same prob with me..
I've got exactly the same problem. I downloaded the Rom update 3.15 and the new radio update. First I installed teh Rom update and after a hard reset I "installed" the radio update.
While updating the XDA hang and I waited for about ten minutes to see if the XDA was really hanging. I gave the XDA a hard reset but then the XDA didn't work anymore (white screen and blue bar on top).
I can still access the bootloader. I installed a Rom from a XDA which still works. Still no difference. When I tried to write the Radio rom to a sd-card I got that message that I have to connect one or another RS cable.
The XDA still doesn't work anymore. I have contacted O2 but they told me that they couldn't help me because they can't find my IMEI number in their system. I contacted the company where we ordered all the XDA's but I still don't have an answer.
Thank you O2 for being so nice with not helping me out with my one week old XDA without any scratch. I hope my XDA could be replaced as soon as possible since the XDA will not sold anymore when O2 changes to Telfort !
If you can make the ROM update work, you should be able to install the corresponding radio as well.
Try this:
1. Make sure you have the latest version of ActiveSync (=3.6)
2. Make sure the battery is fully loaded.
3. Extract the ROM update and Radio update to different folders.
3. Connect the cradle to AC-adapter and computer.
4. Put the device in the cradle and make sure it connects to ActiveSync.
5. Run the ROM installation application. Should take 5-6 minutes.
6. Run the radio installation. IMPORTANT: When you are prompted to remove power supply, pull the power plug from the cradle. If you do not disconnect power, the update will fail. I think this update took a little more time than the ROM update, and the device may seem "dead" for a while.
Good luck!
Hy Guys.
Are there any news about the problem flashing the XDA?
Tried last night to update my XDA to the last Qtek-Versions (ROM 3.16.52.....)
ROM Update works fine, but after the RSU Update the phone didn't work any more.
Have the same white screen with the blue taskbar and the little keyboardicaon down the right side.
Entering Bootloader mode there comes the Error Message "GSM Error"
Nice screen is the qtek "Booting Screen".
It shows
G <empty>
R <empty>
3.16.52
Hope there are any other hints to resolv this problem.
Have anyone got some experiences with sending it back to O2 with an "unoffical" Softwareversion?
Or is there any posibility to change the ROM Version to an old (original) O2-RomVErsion?
Thanks for any help....
Regards
Stefan
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Regards,
Riccardo
Riccardo said:
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Click to expand...
Click to collapse
SD-Card Writer just orderd
But I don´t know if it will work. Since the Bootloader says GSM Error, I think there will be no other posibility to restore it.
Let´s wait for some days, hope and we will see.....
Stefan
Dear all,
I want to reverse the ROM from EXEC to ATOM.
I have the ROM image with me. Can anyone help me with the process?
Appreciate it very much.
Sorry for asking, what is your problem with your Exec ROM. Actually, I have also some issues re Exec ROM with my Atom and I would try to revert also tonight.
Actually, I have already reversed my Atom, because the ExtROM on my Not-Quite-The-Exec mysteriously disappeared for the 4th time so far this year.
(I should thank Quanta for giving us a buggy flasher, otherwise this procedure won't work, as the Exec bootloader specifically prevents flashing this way)
*DISCLAIMER: the following is my experience. I have no actual technical knowledge of the innards aside from anecdotal evidence. I take no responsibility for bricked devices. I am also not afilliated with O2, Quanta, HP or M$, because they have lately earned my utter disrespect.
*DISCLAIMER2: THIS IS ASSUMING YOU ARE USING A NORMAL ATOM. Not Life, not Stealth (that ain't no Atom), and not Exec. Just an Atom or an A-pure. I also have no idea what board version I have, but I do know it's one of the first releases of the device.
Here's what I did. I simply ran the Atom Exec DSUU (NOT the Atom one, the hacked Exec one you're probably using) all over again - on my device - while connected. If I'm reaaaal lucky, and I'm real lucky often, (especially if I leave my SIM in the device), I'll get a message "ExtROM Format Fail" right in the middle.
A reboot of the device at that point will render it in bootload mode, with just big text in the middle. IN THIS BOOTLOAD MODE, YOU CAN FLASH WITH ANYTHING, and the device won't complain AT ALL (At least that's what it seems). And yes, it connects via USB, and detects the USB connection. I don't think you even need Async running (hmm...some hidden USBHost functionality?), but I had mine in the background.
So I ran the original, unhacked 0426-mot0822 ROM upgrade - and it ran (it thought it was flashing into ROM version 0). In my case, it ended up not quite formatting the ExtROM correctly first time - because I didn't think my SIM was interfering with the ExtROM flash process until the third time. But I have my old ROM back now, 100% working - just keep trying the flash procedure again and again until the ExtROM finally goes through, and the rest of the stuff completes.
Hope it helps.
Ultimate Chicken said:
If I'm reaaaal lucky, and I'm real lucky often, (especially if I leave my SIM in the device), I'll get a message "ExtROM Format Fail" right in the middle.
Click to expand...
Click to collapse
I never experience this. Still, don't know how to revert back to Atom ROM.
Boatloader
I had the same problem but just entered boatlaoder and flashed the original ROM of Atom Pure, however, kept praying like hell till my Atom Pure rebooted with original ROM.
Knightro said:
Sorry for asking, what is your problem with your Exec ROM. Actually, I have also some issues re Exec ROM with my Atom and I would try to revert also tonight.
Click to expand...
Click to collapse
After changing to EXEC ROM, my Bluetooth cannot transfer files anymore.
Also, there are many other problems such as auto-rebooting and hanging at times of exchanging calls. Battery life drains out faster than normal. Basically the ROM is unstable.
Now, I previously read somewhere in this forum that we need to hold onto the camera button while hard-resetting the phone in order to get into bootloader and then dump the original ATOM ROM into the phone. But it didn't work when I tried it and now my phone's a little more screwed.
Did I get the procedure wrong? I couldn't find the old thread anymore, so hoping some bros out there can advise me what is the correct procedure.
Much appreciated.
tjkhattak61 said:
I had the same problem but just entered boatlaoder and flashed the original ROM of Atom Pure, however, kept praying like hell till my Atom Pure rebooted with original ROM.
Click to expand...
Click to collapse
Where can I find an original ROM of Atom Pure? Please help.
Jamez. I'm also experiencing hanging. Plus contrast problem and not charging on AC.
To others, what is really the difference in hardware between Atom and Atom Exec?
You can get the original ROM from O2's website.
I do have contrast problems but not the charging one.
Any bros out there to help us out???
Read this from other forum. Has anyone tried this procedure?
1.Before flash job done, backup all the things 1st
2.Then unplug the mini USB (must) and take off the memory card (it isn't matter)
3. Click the Camera button + reset button at the same time. U will see your Atom come to DSUU mode/Bootloader. it seem same interface as the command prompt at Win XP.
4. plug-in the Mini USB and can start flashing ROM.
(This method can flash to other language, but do it own risk, warrantly not covered)
Doesn't work!
Knightro said:
Read this from other forum. Has anyone tried this procedure?
1.Before flash job done, backup all the things 1st
2.Then unplug the mini USB (must) and take off the memory card (it isn't matter)
3. Click the Camera button + reset button at the same time. U will see your Atom come to DSUU mode/Bootloader. it seem same interface as the command prompt at Win XP.
4. plug-in the Mini USB and can start flashing ROM.
(This method can flash to other language, but do it own risk, warrantly not covered)
Click to expand...
Click to collapse
Thanks very much for the effort bro. It still doesn't work.
I followed exactly but after I tried to dump in the ROM, the bootloader shows "USB connection failed". This is getting frustrating!!!
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
daddy_yankee1980 said:
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
Click to expand...
Click to collapse
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
TaurusBullba said:
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
Click to expand...
Click to collapse
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
daddy_yankee1980 said:
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
Click to expand...
Click to collapse
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
TaurusBullba said:
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
Click to expand...
Click to collapse
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
daddy_yankee1980 said:
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
Click to expand...
Click to collapse
So, how exactly are you updating it in the bootloader? (just curious)
TaurusBullba said:
So, how exactly are you updating it in the bootloader? (just curious)
Click to expand...
Click to collapse
I put the phone in bootload mode by pressing and holding the camera button, then resetting by pushing the reset hole which then loads it to a colorful screen which I assume is the bootloader screen. Then I just connect it and try to flash it using one of the ROMS i have. Thats how I did it the past couple of times.
What upgrade utility are you using? You might wanna try the one attached! It is the 'NO_ID' version and up to now it flashed everything! Simply extract the zip file to a folder on your desktop, then copy your nbf file in to it too and run the "ROMUpdateUtility_Wizard_NoID.exe"
hello
im having the same problem, i just tried it, didnt work for me
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
My phone also appears to be bricked. It locked at 99%, and after trying the steps indicated in the core2.0 installer, it closed, and I'm having difficulty figuring out the next step. As is, I get ERROR [264] CONNECTION. Is there a way to get the phone functional enough to load an OS? I've been searching these forums for about 30 minutes and haven't found what I'm looking for. There should be a recovery wiki.
I have the same problem...
Junner2003 said:
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
Click to expand...
Click to collapse
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
I thing more
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
Every rom that i put in the phone is the same...always freeze on the splash screen...
Junner2003 said:
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
Click to expand...
Click to collapse
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
alissonguedes said:
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
Click to expand...
Click to collapse
Did you try already to flash your shipped ROM?
I dont have one
Junner2003 said:
Did you try already to flash your shipped ROM?
Click to expand...
Click to collapse
I dont have one...
You can download the Official ROM directly from HTC's site.
alissonguedes said:
I dont have one...
Click to expand...
Click to collapse
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Junner2003 said:
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Click to expand...
Click to collapse
A mda vario tmobile from germany...
Hi,
I bought an herald not blocked to any operator, i tried to upgrade it
to WM6 but it crash during te update (don't know why).
I tried to re-flashed it with RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
but i got an invalid vendor id something like message.
I try to find a no vendor id with no success.
Please Help!!
Regards
Herc.
There are VERY much posts of people who are havig the same prob's. And yes there is a good possibility that your device is bricked. BUT wich ROM was installed on yur device? you could try these two ROM's first before messing around!
-http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
-http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
first to to is putting your device in bootloader mode: HOLD Camera and then press soft reset once. then connect to pc via USB, then run the RUU and follow the steps. good luck
Hi,
I already tried both of these roms and even more, even roms from other
models but always with the same error: INVALID VENDER ID
I think the solutions will be:
-Right or NoVendorId Rom. (Like for the prophet)
-Mtty trick but with right Commands and values
-SD Boot trick via HERAIMG.nbh well signed.
Please someone to help us
Bye
Herc.
News here??
bayxsonic said:
News here??
Click to expand...
Click to collapse
You could flash back no problem by flashing back to original shipped ROM......problem is though you need to find out which ROM came with your phone, then you need to get your hands on it.
hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do
Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.
No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet
Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!
If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.
zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!
Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..
Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies
i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?
ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.
pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.
koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works
Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.