Related
I have seen numerous posts on this and alot of depressed people trying to get VOIP working with 3G on their trinity, after alot of forum reading and testing I have found a bulletproof solution. It lets you configure your SIP settings, you can make calls and receive calls and hear and people can hear you over wifi and 3G. However, I cannot get incoming calls to ring at all when using 3G only (it works with WIFI flawlessly). So basically unfortunately VOIP as it is now with wm6 only lets you make VOIP over 3G (you cannot receive calls as it just doesnt ring, I suspect it is a firewall issue as over wifi it doesnt ring till I open up ports on my router).
First install the first VOIP file, it has sip config built it. YAY lol
Now you need a cab extractor program like wince manager, which you can download for free [SIZE=-1]www.ocpsoftware.com/products.php?nm=cecabmgr
Now extract the rtc.dll file in the second cab I have attached and copy it to your windows folder and overwrite the one currently there. Without the dll file VOIP works but u cannot hear anything when the other party talks. Once you overwrite this dll, and u have to use Resco file explorer or similar, then VOIP works 100%. Ofcourse you have to run sipconfig, and enable VOIP over 3g and put in your SIP settings
Thats it. Pretty easy fix right
[/SIZE]
tks
Thanks my friend.
Nadavi
Thanks firstly
The second cab isnt containing any dll
Dear mcq3000
Can you share with us which VoIP provider you tested this method with, and can you post your dialplan?
Thanks
I did everything that is described in this thread.
On the today-screen it says my accountname and available. But how can I make a voipcall then?
I use MUNs 2.01 TE ROM.
ulischultz said:
I did everything that is described in this thread.
On the today-screen it says my accountname and available. But how can I make a voipcall then?
I use MUNs 2.01 TE ROM.
Click to expand...
Click to collapse
Just click once on the today plugin and "available" will change to "selected"
Then make a call as usual and you'll see your voip network name instead of the gsm carrier.
Thanks!
I reinstalled the files from above now, and now it only says on the today-screen:
"Internet Calling: No Service"
It seems, that voip does not connect at all now.
When I click on this line, it opens the Internet Calling settings page of the phone.
where is the interest of VoIP over 3G ? i think about cost ...
how many data is used for a conversation with VoIP over 3G ?
extenue said:
where is the interest of VoIP over 3G ? i think about cost ...
how many data is used for a conversation with VoIP over 3G ?
Click to expand...
Click to collapse
In Saudi Arabia, you can get unlimited HSDPA for 100 dollars per month.
Why I can't find any dll inside the wm5voip.cab ?
with skypho.net it doesn't work, it tells me "Skypho:no service", and if I make a phone call him it activates the gsm Does someone succeed us?
the rtc.dll was not cancelled but I has glued him above, this ok?
thanks for any suggestion
to open the cab and extract the file you need to use wince cab manager program. You cannot just open cab with winrar to see contents, those arent the real file contents. Get Wince cab manager and install it and open cab with that program and you will see dll and you can extract dll.
mcq3000 said:
to open the cab and extract the file you need to use wince cab manager program. You cannot just open cab with winrar to see contents, those arent the real file contents. Get Wince cab manager and install it and open cab with that program and you will see dll and you can extract dll.
Click to expand...
Click to collapse
in fact I have used wince cab manager,
can be that with Skypho.net it has in anymore this configuration stun?
Dominio voip.eutelia.it
Sip Proxy Server voip.eutelia.it
Sip Proxy Socket 5060
Stun Server stun.voip.eutelia.it
Stun Server Socket 3478
also tried with Stun but nothing.
and also activated the door 5060 from the register on 1 in voip sip.
Do I have to change telephone manager?
thanks still
alishankiti said:
In Saudi Arabia, you can get unlimited HSDPA for 100 dollars per month.
Click to expand...
Click to collapse
I've got unlimited HSDPA for 7 euros / month In the Netherlands
Floriz said:
I've got unlimited HSDPA for 7 euros / month In the Netherlands
Click to expand...
Click to collapse
Hotdiggididaaaaaaaam! That is pretty cheap!
mcq3000 said:
I have seen numerous posts on this and alot of depressed people trying to get VOIP working with 3G on their trinity, after alot of forum reading and testing I have found a bulletproof solution. It lets you configure your SIP settings, you can make calls and receive calls and hear and people can hear you over wifi and 3G. However, I cannot get incoming calls to ring at all when using 3G only (it works with WIFI flawlessly). So basically unfortunately VOIP as it is now with wm6 only lets you make VOIP over 3G (you cannot receive calls as it just doesnt ring, I suspect it is a firewall issue as over wifi it doesnt ring till I open up ports on my router).
First install the first VOIP file, it has sip config built it. YAY lol
Now you need a cab extractor program like wince manager, which you can download for free [SIZE=-1]www.ocpsoftware.com/products.php?nm=cecabmgr
Now extract the rtc.dll file in the second cab I have attached and copy it to your windows folder and overwrite the one currently there. Without the dll file VOIP works but u cannot hear anything when the other party talks. Once you overwrite this dll, and u have to use Resco file explorer or similar, then VOIP works 100%. Ofcourse you have to run sipconfig, and enable VOIP over 3g and put in your SIP settings
Thats it. Pretty easy fix right
[/SIZE]
Click to expand...
Click to collapse
Sorry - just looking for solid confirmation - been tearing my hair out to get this working. I install the VM VI Black VOIP & Config.CAB on my phone and replace the rtcdll.dll file once extracted from WM6VoIP.CAB using resco explorer. when you refer to fist and second files - it's better to specify file names to be sure we're all singing from the same songsheet!
mcq3000 said:
to open the cab and extract the file you need to use wince cab manager program. You cannot just open cab with winrar to see contents, those arent the real file contents. Get Wince cab manager and install it and open cab with that program and you will see dll and you can extract dll.
Click to expand...
Click to collapse
Thank you, I did use winrar
OK I did anything well, I can make a call, am heard speak but I cant hear what the recipent says. On other tries I hear him for 1 second. I also have too much noise on the speaker. While on the other side the recipient hear clearly
Could somebody post the rtc.dll from the WM6VoiP.cab???
I don't know how to extract this...
Thanks!
ulischultz said:
Could somebody post the rtc.dll from the WM6VoiP.cab???
I don't know how to extract this...
Thanks!
Click to expand...
Click to collapse
Here it is. As for me, this solution only worked for one call, then no cigar after that.
Hallo,
iam looking for a Rom with good intergrated VOIP Features like the TC500 (f. ex. global setting that Voip should used insted GSM if availible, common Call List etc)
best with IAX Client instead of SIP (IAX = no probs on with closed ports etc)
Anyone here using successfull VOIP with the Prophet?
Thanx and Happy 08!
the rom i use has VOIP click in my sig to find it
also there is a cab somewhere on this forum with the VOIP cab just do a search
using HTC Cruise, we had to flash the original WM6, and replace it with WM6.1 version that comes with VoiP dialer. the device started connection with the SIP server, and make and recieve calls with no problem. the next step was to install the avaya one-x mobile client due to the need for dual voip/GSM functionality, and there started the problem.
the device can not connect with the sip server, and only works on GSM mode.
we have followed some suggesgtions to edit the reg files and with no luck.
What we are suspecting is the HTC built in dialer, which seems to be still enabled.
now the question for those who suceeded getting this thing running; do we have to remove the built in dialer, and if yes then how?
We have searched all availbel sites and forums, and found this forum to be the best, and most active one. We certainly need your help and suggestions to solve this problem.
Thank you, in advance and have a good one.
I would be interested to know if you ever found a way around this issue?
hello evryone,
sorry if this has been mentioned many times.
i have my beloved HTC TD, with shine 2.4 Full and Radio 05.
i am pleased with it , only missing part is to be able to use VOIP/Sip Calls.
i have been browsing this forums for many pages, and there are many unsolved and unfinished threads about the voip problem in HTC TD.
1. SJphone
2. Sip config tool
3. hidden sip manager
4. wm61voip.cab
i have tryed all, and i havent had luck yet to be able to use my voipbuster account on my phone..
My last phone was a nokia n95, symbian, was soo easy to setup voip and make quality calls, please dont tell me that a windows mobile is that hard to enable sip calls
so has anyone a define working solution for voip/sip on HTC TD? or is this half dead topic for now?
thanx
Sonic
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Hi Sonic,
I'm using SJPhone without any trouble with a Justvoip account (another Finarea voip, like VoipBuster).
I give you how I did the configuration for it:
On General, in name you put VoipBuster, Type SIP Proxy
Iniatialization: mark all in account and password
SIP Proxy: Proxy domain: sip.voipbuster.com, port 5060; User domain (your username). Mark Register with proxy and Proxy is strict outbound
on the last tab (stun) put in server address: stun.voipbuster.com with port 3478
And that's all. You need to have credit in your voipbuster account. You must put the password in the 1st time use in your SJPhone.
Cheers,
Gonzalo
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Click to expand...
Click to collapse
Hi SID! thank you so very much for the guide, ill try it later tonite, when im finished doin my job. ill let you know.
Sonic
tanghetto said:
Hi Sonic,
I'm using SJPhone without any trouble with a Justvoip account (another Finarea voip, like VoipBuster).
I give you how I did the configuration for it:
On General, in name you put VoipBuster, Type SIP Proxy
Iniatialization: mark all in account and password
SIP Proxy: Proxy domain: sip.voipbuster.com, port 5060; User domain (your username). Mark Register with proxy and Proxy is strict outbound
on the last tab (stun) put in server address: stun.voipbuster.com with port 3478
And that's all. You need to have credit in your voipbuster account. You must put the password in the 1st time use in your SJPhone.
Cheers,
Gonzalo
Click to expand...
Click to collapse
Hmm really? i thought i tried SJphone last week, and i set it up. but it just keep saying couldnt find network or connect.
or somethign network related problem. ill try your guide once more time soon, and ill let you know.
SJphone should work on 3g connection aswell right? not only wifi.
Sonic
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Click to expand...
Click to collapse
hey mate, so far so good, i have done everythig in the steps.
only problem is the
12. Start > Setting > Today > Items TAB > TICK-ON "Internet Calling"
my today screen doesnt show any of those extra item i can add. only touchflow 3d. and call history and calender. is it because the shine 2.4 is limited to show morE? or how can i add more on today screen.
thanx
okey i turned off the tf3d and then i was able to see the voip: no service.,
it keeps saying no service. hmm. i am on 3g. can i force it connect somehow?
Sonic
hmm okey here is somethig funny,
i started opera to force my phone to use 3g data., and voila, the internetcalls: sip said available. like it logged into it. then i click on it and it said selected.
then i choose contact and tryed to call, it gave me error:
cannot complete the call. the signal may be unavailbe or the phone number may not be valid please try again.
i have the +45andphonenumber when i call.
hmm
Sonic
p.s i can definetly see that the GPS is completly broken now. it cant catch anything.
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
SonicSpinner said:
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
Click to expand...
Click to collapse
Hi Sonic,
That is such a shame as you have already decided to quit VOIP on your device.
If you follow the instructions as it is then there is no doubt that it wouldn't work, as I have HARD-Reseted my Diamond 4 times since I have got this procedure and everytime I am going through the same procedure and everytime VOIP & TomTom GPS really works.
And yes on 3G & HSDPA connection as well as WiFi (obviously Wifi is much faster & clearer all the time)
For the issue of TODAY entry you have to use the application "2nd Today" (http://forum.xda-developers.com/showthread.php?t=401907)(I can't send you the screenshot as my Diamond is off for replacement for the bloody short battery life)
Actually 2nd Today will change one of the soft key on the main/Home Tf3D screen to your defined word e.g. VOIP, once you click that soft button, the TF3D will hide and you would see your normal Today screen, on this screen you have another Soft Button to go back to TF3D. Simple
For the issue of making a call some VOIP providers indicate to attach a "9" before the number to let the provider understand that you are calling from a handheld device not from PC (e.g. actual number 555666333, Dialing number from handheld 9555666333), check your VOIP provider thay must say something regarding this.
Anyway GoodLuck
Sid
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Attached Files Procedure.txt
01-WM6VoIP-cab.CAB
02-VOIP Drivers-cab.cab
destr0_VOIP_WM61___SIP_Config_1.1.zip
Click to expand...
Click to collapse
I made All-in-one
trying the all in one solution
Kinda dislike sjphone because it cant properly access the phone's contacts...and audio quality isnt fantastic
sidd said:
Hi Sonic,
That is such a shame as you have already decided to quit VOIP on your device.
If you follow the instructions as it is then there is no doubt that it wouldn't work, as I have HARD-Reseted my Diamond 4 times since I have got this procedure and everytime I am going through the same procedure and everytime VOIP & TomTom GPS really works.
And yes on 3G & HSDPA connection as well as WiFi (obviously Wifi is much faster & clearer all the time)
For the issue of TODAY entry you have to use the application "2nd Today" (http://forum.xda-developers.com/showthread.php?t=401907)(I can't send you the screenshot as my Diamond is off for replacement for the bloody short battery life)
Actually 2nd Today will change one of the soft key on the main/Home Tf3D screen to your defined word e.g. VOIP, once you click that soft button, the TF3D will hide and you would see your normal Today screen, on this screen you have another Soft Button to go back to TF3D. Simple
For the issue of making a call some VOIP providers indicate to attach a "9" before the number to let the provider understand that you are calling from a handheld device not from PC (e.g. actual number 555666333, Dialing number from handheld 9555666333), check your VOIP provider thay must say something regarding this.
Anyway GoodLuck
Sid
Click to expand...
Click to collapse
Hey sidd,
thanx, your words really sound like its working. with the number 9, i didnt know about. which means i have to add 9. infront of every number i use. okey well i only want to call to few numbers anyways.
im using internetcalls.com same voipcheap or voipbuster, havent read anythign about it though,
but i will try yoursolution again later this weekk
thanx again
Sonic
OS-ZloyMuh said:
I made All-in-one
Click to expand...
Click to collapse
Tested. Works a treat.
It's just that sometimes, it doesn't detect when I get connected to the wifi, I have to turn internet call off and then reset it on 'whenever available' for it to sense that the phone is connected to the internet.
OS-ZloyMuh said:
I made All-in-one
Click to expand...
Click to collapse
Hi OS-ZloyMuh,
Thanks so much for that but I have one question, have you made this CAB according to the procedure I have posted earlier like 1,2,then 3 overwrite?
Please explain as it could be a big help.
Regards
Sid
SonicSpinner said:
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
Click to expand...
Click to collapse
I have VOIP running on my Diamond from day one while using GPS in Ozi, TomTom, TrackMe and other software as you can see from attached Today screen also VOIP is active. The trick is that you need to kill one file after installing VOIP. This file DNSapi.dll is preventing you to use your GPS. After deleting it and soft reset it will create automatically a new DNSapi.dll and all will be well.
Do the following after you have VOIP installed and working. (and your GPS is killed)
In your Today screen set Internet calling OFF
Soft reset
Use file explorer or Total Commander to delete DNSapi.dll
Soft reset
Switch Internet Calling ON
Ready.
Finally! GPS stays working! Howeverrrrrrrrr... Unlike the other version of the VoIP cab I used, this one let's the sound go over the EXTERNAL speaker... and that sucks balls... (Sorry for my choice of words ) Everyone can hear what I hear...
In other words... How do I fix this? VoIP over the internal speaker AND let GPS work...
I seem to be having problems calling mobiles... Everything else works fine, including GPS...
Can I change something in the dialplan to make it work? if so, what?
dubdeckerbuss said:
I seem to be having problems calling mobiles... Everything else works fine, including GPS...
Can I change something in the dialplan to make it work? if so, what?
Click to expand...
Click to collapse
You have to keep the Today Voip plugin as "Available", you have to only click and "Selected" it once you have to make a VOIP call.
In the situation of "Available" you will still be able to receive the VOIP & normal calls.
In other word, if you will select the voip then you can not use the normal phone.
So keep it on "Available".
Finally! GPS stays working! Howeverrrrrrrrr... Unlike the other version of the VoIP cab I used, this one let's the sound go over the EXTERNAL speaker... and that sucks balls... (Sorry for my choice of words ) Everyone can hear what I hear...
In other words... How do I fix this? VoIP over the internal speaker AND let GPS work...
Click to expand...
Click to collapse
Yes this is the problem and I think there is no solution for that untill unless you try to use a Bluetooth headset (I haven't tried this idea by myself).
Let me know if you try this option.
sidd said:
You have to keep the Today Voip plugin as "Available", you have to only click and "Selected" it once you have to make a VOIP call.
In the situation of "Available" you will still be able to receive the VOIP & normal calls.
In other word, if you will select the voip then you can not use the normal phone.
So keep it on "Available".
Click to expand...
Click to collapse
Sorry, my bad, I didn't explain very well... I understand what you've said above, and of course I only use 'selected' while I want to make a voip call, but when in that state I am unable to make voip calls to mobiles... I get an error telling me the number may be invalid
NEW IMPROVED CABS : POST 3
A very Special Thanks to tucahara, Schap, Jaap de Wolf, Dridder
Note : For HTC devices only, please read 2nd post -below-for non HTC devices.
- 3G, WLan, GPRS Capable
- GPS Works
- Recent Drivers
- Updated Registry
- All Major Codec compatible[ a-law, u-law, GSM ask provider to enable ]
- Integrated with Phone and address Book
- VOIP and Carrier sellectable on today screen
- SIP Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- Dial Plan Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- NAT Enabled
- Echo Canceller
- For WM6.1 and WM6.5
- Tested and working on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K], Xperia X2
- No sound from earpiece ( Please install cab from previous thread but that is only for HTC devices )
INSTALL ON FRESH OS and PLEASE POST YOUR RESULTS GOOD OR BAD. Thanks
THERE IS NOTHING WRONG WITH THESE CABS, SO PLEASE DO NOT COMPLAIN ABOUT CABS. IF THESE CABS WONT WORK, PLEASE READ DIFFERENT POSTS IN XDA AND FIND OUT WHY. MOST COMMON REASON IS DEVICE OR OS NOT SUPPORTRD MEANING DEVICE DOESNT HAVE FILES NEEDED FOR THESE CABS TO WORK.
These cabs are tested, working with different providers-devices and are not for noobs, if you have come across this before, you will find out, these cabs are the best among them.
Outdated Cabs HERE
For non HTC devices, do the following
- Install one of the cabs post 3 matching your OS.
- Fill all required information in setup voip.
- When you try to save you will get a error
- Close it and Run your GPS program.
- Your GPS with get a lock in few minutes as normal.
- Once you find out your GPS program can see satellites, close it.
- Copy and paste dnsapi.dll into your windows folder
- Restart your device and you will have your gps and voip/sip working
- Make sure to fill information in setupvoip again
New improved cabs
New improved cabs with changed dll. Note : Only for HTC devices. For other non HTC devices, please refer post 2 along with these cabs for optimum results.
Reserved for future2
Reserved for future3
Reserved for future4
Calls hang up immediately after being answered
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
nickdo said:
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
Click to expand...
Click to collapse
Samsung WM6.5 drivers not compatible with dlls. Please look at outdated cabs link above and go to last page for omnia solution. It works fine on my omnia with Wm6.1. I have tried on WM6.5 on Omnia with same results as yours.
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
nickdo said:
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
Click to expand...
Click to collapse
you are right
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
That is not right. I have an Omnia 2 i8000 windows mobile 6.5 and I am able to use voip on my phone.It works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. AutoAudioRoute V2.0
4. Copy paste dll in windows folder.
My PDA is i8000NXXJJ1
jukefox said:
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
Click to expand...
Click to collapse
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
bbuhas said:
that is not right. I have an omnia 2 i8000 windows mobile 6.5 and i am able to use voip on my phone.it works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. Autoaudioroute v2.0
4. Copy paste dll in windows folder.
My pda is i8000nxxjj1
Click to expand...
Click to collapse
----------------------------------------------------------
this is not the integrated solution sir. Thanks for time.
----------------------------------------------------------
dhillonbros said:
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
Click to expand...
Click to collapse
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
jukefox said:
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
Click to expand...
Click to collapse
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
dhillonbros said:
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
Click to expand...
Click to collapse
My phone works great with other not integrated solutions like PortSIP or AGEphone Mobile, so my network is fine. And there should not be a problem with the codecs as well as PortSIP (I don't of the codecs AGEphone uses) uses G711U, G711A and GSM as well (I know of them because theses codecs are configurable over the GUI).
I use AVM FRITZ!Box 7390 as modem / router with its own SIP registrar. That means my Omnia II is configured to use my FRITZ!Box as a SIP server whereas my FIRTZ!Box is connected to my VoIP service provider (the popular German internet provider 1&1) and redirects the VoIP packets to them. It is totally transparent to the SIP client therefore no STUN / ALG (I never heard about ALG before) is used between the SIP client and my FRITZ!Box.
I am not willing to create an account at voipvoip.com because I definitely want to use the phone numbers I got from my ISP but I may provide you credentials for testing purposes to use a phone number from my ISP if you like.
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
jukefox said:
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
Click to expand...
Click to collapse
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
dhillonbros said:
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
Click to expand...
Click to collapse
Hello again,
I already bypassed my router by configuring my pbxes.org account, didn't I? Anyway I now switched my router with integrated telephony services support by an older FRITZ!Box 3130 without telephony services to exclude any conflicts with reserved ports or somewhat else. And you know it: Same result.
Last but not least I tried a connection over 3G by activating that option within the configuration. But I failed already with selecting the service. The search action did not succeed.
I'm running out of ideas. What now? Shall I setup an account for you? I really wanna see whether you are able to reproduce my problem or not.
Thanks a lot.