I have a problem with my SPV M3000.
It does not charge any more with the USB cable nor with the original AC adapter.
When I connect the AC adapter, the battery icon shows the AC cord like it is charging but the right LED flashes ORANGE instead of staying ORANGE.
If I click on the battery icon, the battery status shows the battery level instead of "Charging". The power bar does not show any charging activities.
I have done an update from Wm5 to Wm6 and also updated the Radio ROM, but still the same problem.
When I want to charge my battery, I take it out the phone, and charge it with an universal battery charger.
Does anyone else have/had the same problem ? 10x
probably you have a problem with the usb, i had the same problem and I am waiting for a new usb to replace the broken one.
I dont think so. My usb is working fine because I can sync to my PC
Related
Hi,
My device doesn't start up anymore (see other recenttopic). I think the battery is dead.
Because it's unlocked, I cannot return it under warranty....
Before I even try ...Can I relock it when the battery is dead?
Best regards
Well, you can only do stuff of the device if it is powered. I am assuming that you can power it from the USB connection and that it comes on?
It doesn't power on through usb connection neither
It doesn't power on through usb connection neither
then its not a battery problem, and there is no way to do anything software wise on it.
I take it you have tried a different USB cable and USB port? and the plugin charger?
Dalamario helped me out
Dalamario explained in the article "Busted K-Jam" how I could fix this problem. My battery is charging again thanks to his advise
Hi!
I had problems charging my Wizard, too. Nothing happend whein it was connected to my PC. It would not start, would not charge or anything else. I had to use the normal power supply, wait a minute or so and then it started charging again. Seems to be a problem when the battery is realy completely emty. Hope this helps!
Cyberdyne
This problem has been discussed frequently!
It can not be completely discharged battery. If the battery is fully discharged Communicator will not be charged with:
1. USB sync cable
2. wall charger current of less than 1 Amper
3. car charger (I do not know exactly)
Charged need 5 Volt 1Amper!
I read through all the forums and threads related to battery problems but non was similar to the problem im facing.My wall charger isnt working.when i connect it to my hermes the amber light turns on.the status of battery is also charging,but it isnt charging..once in a bluemoon sometimes it charges to aroung 20-25% thats it.my phone charges on usb connected to pc and on car charger.what can be the problem in the charger and possibly if a solution is available let me know
Does it charge with the wall charger when the phone is powered off completely? If it does, then its a software issue, and a new rom flash should solve it. If it doesn't then its a hardware issue.
On my phone, the usb socket has started to wear out, and it got to the point where it sometimes randomly lost the connection. I bought a dock off ebay, and that has luckily solved my problem.
it is the problem wid d charger....
Hi all.
I've bought a XDA IIi the XDA shows an orange/red blinking light when charging it trought a USB Cable to PC. According to the manual, it should be an amber solid led when charging it. The only solid led I've seen is a green one on the charger.
I'm available to sync trought ActiveSync, but XDA shows an orange/red blinking light and one post talking about that blinking orange led was caused by a low-power charging, but i use USB Cable to PC.
I always use USB to PC cable and charge my XDA phone.
I have exactly the same problem, any solutions?
Me too, same problem but additional headache no charge via usb nor wall charger. It also blinks on original wall charger also, set off charging also. its frustrating ARRRRGH.
Need solution badly
mine too
mine does it too but only once in awhile and if i soft reset my phone it goes back to charging like i listen to music and its charging and then suddenly the stupid orange light blinks and doesnt charge my phone and its annoying?
anyone have a solution?
The problem might be a near-dead or malfunctioning battery. Using a USB cable to charge does not fully charge a near-dead battery, and sometimes if the battery has completely discharged, the cable will not charge it.
Another solution...
I'm having the same problem... When i plug the usb connector the amber LED turn's on and hold. After some time the LED start to blink. When the led is blinking the battery doesn't charge.
There are some "software based" solution, or a debuging tool???
The orange led is normal that's how it is when it is in charging mode but the blinkink led is becouse of the conection with the phone and the USB try to move the USB in the phone plug it might work cuz it workd for me.
I hope i help'd u guys
What kind of move? Do you think that the problem is a bad electric contact? I guess not... I pluged and unpluged several times...
Well it workd for me becouse if i plug the usb cable to the end it has no connection that's way i move the cable back and forth untill i get the connection.
Blinking amber
I have the same problem on my htc p3300, and when i used batti 2.4 i saw that the battery temperature is 432675.5 etc something fake temerature. This is the reason, why my pda unable to charge my battery. If you set your pda in bootloader mode, it will charge your battery!. After 3 or more times i charged it in bootloader mode somethimes the battery temp sensor works normally, and the charge is working as well. Sometimes not.
Bat you can charge your battery allways in bootloader mode.
Sorry for my English.
Try it!
Good luck!
???
smalll said:
I have the same problem on my htc p3300, and when i used batti 2.4 i saw that the battery temperature is 432675.5 etc something fake temerature. This is the reason, why my pda unable to charge my battery. If you set your pda in bootloader mode, it will charge your battery!. After 3 or more times i charged it in bootloader mode somethimes the battery temp sensor works normally, and the charge is working as well. Sometimes not.
Bat you can charge your battery allways in bootloader mode.
Sorry for my English.
Try it!
Good luck!
Click to expand...
Click to collapse
does it show any indication while charging in bootloader mode???
guys I have some charging problem and want to know some information.
I have a cheap charger and I also had charging from usb 1.1 (old PCs) and they f**ked my battery.
Now I got a new battery but still have few issues. Both charger and USB charge some times and some time not.
Now what kind of charger I need I mean how much mA, V, and A I need. Second do I only plug my phone into USB 2.0 or USB 1.1 is also save to charge.
seriously you updated your phones firmware and cant figure out how to charge!! i would buy external battery charger as your usb port on the phone is prob loose.. (ive seen the usb port on wizzard just fall off) so might be your issue.. id say its Save to charge from usb 1.1 and 2.0 its also safe to charge from 1.1 and 2.0!
so again what kind of charger do i need (mA, volt, A etc) and where do i get the latest firmware (I already installed the latest official ROM which includes the Windows, Radio and IPL/SPL) do you mean other then it by firmware. My current version is v.2.1.69.101
Active sync remains connected when I plug it into my PC but it stop charging after few seconds and instead of charging battery start draining quickly and the orange light keep blinking, but after unpluging the usb when I restart the phone the battery goes to previous state (percent before charging). This behaviour also happened with my charger.
Is this wizard's hardware problem or due to wrong battery, usb, charger etc?
hey..
i've got a strange problem...
sometimes i try to charge my x1 via usb cable (outlet). and sometimes via usb cable (notebook, desktop pc etc...)
sometimes first alternative does not charge my x1 and sometimes the second!?
thats really strange and i dont understand why?!
im confused... last night i charge it via outlet and nothing happens...
(
I have had the same trouble. Seems to be something with the USB cable. I have one cable with a blue led in and that cable does not charge the phone. The light on the phone stays on and the batti monitor says charging, but it's draining the battery. A second cable is even more strange, it starts charging for 1-2 minutes, then the phone stops charging and says I have a missing sim.... reboot the phone and it works great again. Bot this cable have been tested with the original SE USB charger and my iPhone USB charger. Same thing with both adapters.
What's even more strange is that both USB cables work great with my Qtek 9100 and my 2,5" USB drives.
When I connected the original USB cable to one of the adapters and the phone it's charging normaly. I realy don't know why this is so...