Hi folks, I'm a newbie to this, and am looking for some help.....
I have a T-Mobile MDA Compact III [ARTE 110], which I recently upgraded the ROM to the great 02 Premium 2.0 WWE full version,.... which is excellent by the way !!!!!
My problem is, when I navigate to Comm Manager, [ie to disconnect GPRS ] it comes up with the prompt;
"Comm Manager supports 4 functions at least ! "
The only way to disconnect GPRS is to do soft reset !
I have tried resetting 4/5 times to no avail, I then resorted to re-flashing complete ROM, again to no avail !!
Does anyone have a fix for this,... I have scouted the forums, but cannot come up with anything
rgds
Dougs
Now resolved,.... found answer in forums !!!!.... seems comm manager settings needed re-allocating
Related
HI
I got problems with ActiveSync too. All time I connect my
MDA is only "reciving data" for ages. I do all steps that U
recommended and still same - no change. I reinstal ActiveSync
100 times and do hard reset - no change - anyone can help me?
I got MDA pro from Tmobile UK with newest ROM
Sry should be in other topic - by mistake make new
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
Hi all,
Everything was working fine, till i installed a Schap´s 6 button comm manager.cab
The new comm manager was not able to turn wifi on, but i still could do it through connections label or Battery status tray icons.
But i read that ins some cases when wifi doesent unable you can delete from the registry the key WLAN in :[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
So i did it... after that i am no able to turn WIFI/WLAN on
even from where i could (manually in connection label or Battery status)
I installed some comm manager.cabs to recover that key.
So now The WLAN registry key is there again there but
Wlan is not working any more.
I also read about some cases that wifi is ****ed from the rom, but i think is not my case ´cos it was just installing new cabs. and deleting that key.
I hope someone can help.
Thanks a lot
had similar but not exact problem a while ago
i eventually had to perform hard reset
what is your radio rom- anyway?
jahrami said:
had similar but not exact problem a while ago
i eventually had to perform hard reset
what is your radio rom- anyway?
Click to expand...
Click to collapse
Dont know how to check it.... can it be some of this? :
WM6
ipl 3.13.0001
spl 3.13.0000
gsm 02.94.90
os 3.13.0.0
schaps
It is the skin of schaps 6 button comm. that is the problem, try this one and you have no trouble....
http://forum.xda-developers.com/attachment.php?attachmentid=59395&d=1195993666
I seek other 9502 ultimate owners and experts advice on the below:
Upon trying to connect to the internet using the GPRS functionality, I always receive the following error message:
“Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufacturer’s documentation and try again”
I have tried the following steps:
- Reviewed the connection settings picked up by the Imate configurator upon first boot, they were correct.
- Tried to remove the SIM card and use it on my JAMin, the device connected smoothly (with the above same connection settings).
- Hard reseted the device, still it didn’t connect.
- Checked the Operator settings of my provider on the internet, they are the same ones loaded by the Imate Configurator
- Tried another SIM card, same thing
- Went to the service provider and changed the SIM card and got a new one, same error
I shall appreciate any assistance.
UPDATE
Finally!!!!
After installing the new WM 6.1, the device connected smoothly
.
From a 9502 owner
Hi, I have read your post and looked at my Ultimate to find anything obvious and I cannot. I am on O2 in the UK and used the configurator settings which worked fine. If there are any settngs you would like me to verify for you, let me know.
Oh! did you check the phone settings as well as the network connection settings, it's possible that a default in there does not tally with your provider (Goto the Wireless Manager and Tap MENU|PHONE SETTINGS).
Cheers
Eden
GPRS - Ultimate 9502
Thx for your reply.
I have tried every possible combination of Network / Band selection from the phone settings but it didn't work.
Imate have responded that it may be a ROM issue and that they are working on an new updated ROM to be available soon that will probably solve the problem.
Meanwhile i am trying to figure out some registery tweak that could fix the problem (trial and error)
WM 6.1 Link please
Can you please post the link to the WM 6.1 ROM that resolved your problem.
Thanks
iMate 9502 WM 6.1 ROM
http://forum.xda-developers.com/showthread.php?t=407336&referrerid=676710
Hello all,
This question i have asked many a times still didnt got any solution again asking once more. Now i cooked wm 6.1 for opal it works fine but whenever i cook wm 6.5 and above (wm 6.5.1/6.5.3) my wifi would autostart (wifi status is off in kitchen) on welcome screen... after configuration and first boot when i try to turn off wifi it gets off but after a soft reset my today setting, wifi, bluetooth , comm manager and a lots of things wont work.
So i have got some alternative solution but all have some problem.
1. If i remove serial32.dll my rom works fine but i wont have bluetooth working.
2. If i remove serial32.dll reg entry then also same result no wifi bug but bluetooth wont work.
3. If i remove bluetooth packages from sys same result as above.
So finally i dont have any solution even i tried to remove serial32.dll and later i made cab and installed but after installation it again conflicts and as a result my today setting etc wont work. I also tried switching some driver with gene, elfin but same result.
The only possible solution i see is:
1. To use a different bluetooth stack but unfortunately there are no alternate bluetooth stack for opal (but i tried to install widcomm one with little mod it worked but again iam not sure coz its not finding bluetooth devices)
2. Any alternate dll for serial32.dll which will do the work of serial32.dll but should be compatible with opal (omap 850).
Anybody as some solution?
Anyone has some idea?