Related
How to hard reset MDA T-Mobile PINK.
Br.
A. Wahab
!! VERY IMPORTANT !!
try SEARCHING or RTFM.
regards.
Oh yes everyone, let's drop everything else and get to this right away ;-)
You can find ik here:
http://forum.xda-developers.com/search.php
I tried all over.. but don't found..
Its not a Magician..
its a wizard... and I tried but not found..
Anyone here please waste his 2mins to help me out.
Br.
A. Wahab
if you have same one as on the picture then its Magician..
Its not a Magician..,
Its don't have Intel processor.
waiting for reply from an expert.
Br.
A. Wahab
From the BACK Side its type is
PM200
Br.,
It's a bit complicated with the wizard version of the magician you've got...
First you need two STRONG magnets, a 220 volt wallsocket and some electrical wire.
Now you strip the wire and put the bare copper wire in your mini sd slot
place 1 of the magnets on the table, lay your wizician on it and the second magnet on top. (like a sandwich)
Then plug the electrical wire in your wallsocket and... BAM!! it will be hard reset.
OR
you could do a proper search on the forum
leploep said:
you could do a proper search on the forum
Click to expand...
Click to collapse
If u have skills to search proper. search and tell me link...
I am sure its is not a magician,
because hardware is diffrent..
Its have same hardware as
Qtek S110
I-mate JAM Black
waiting for reply from a person who have enough knowledge..
Br.
It is not a phone which can HARD RESET by pressing POWER + RESET
its have diffrent method to hard reset.. any one knoww????
hold down record and camera and tap reset at the bottom. keep holding record and camera until screen prompts you to push send (green phone) to reset.
The phone isnt magician or wizard, its a charmer. Jam black and S110 are both magicians.
leploep said:
It's a bit complicated with the wizard version of the magician you've got...
First you need two STRONG magnets, a 220 volt wallsocket and some electrical wire.
Now you strip the wire and put the bare copper wire in your mini sd slot
place 1 of the magnets on the table, lay your wizician on it and the second magnet on top. (like a sandwich)
Then plug the electrical wire in your wallsocket and... BAM!! it will be hard reset.
OR
you could do a proper search on the forum
Click to expand...
Click to collapse
I think it would be better if this was done while in a bathtub instead of on the table.
Kidding aside, as Dr. Mobile said in his first post : QTEK S110,
MDA T-Mobile PINK/BLACK, I-mate JAM BLACK.. This is definitely a Magician with the 128MB memory upgrade and WM5, right? I think this is the HTC Charmer?
The Wizard is supposed to be QTEK 9100, MDA Vario, I-Mate K-JAM. This has a slide-out keyboard
Here's the T-Mobile link to the specs corresponding to the picture posted :
http://www.t-mobile.co.uk/Dispatche...nType=pmt&pmid=7242&menuid=ctl_phones_details
Go Figure
dave106 said:
hold down record and camera and tap reset at the bottom. keep holding record and camera until screen prompts you to push send (green phone) to reset.
The phone isnt magician or wizard, its a charmer. Jam black and S110 are both magicians.
Click to expand...
Click to collapse
Spoiler :lol:
dave106 said:
hold down record and camera and tap reset at the bottom. keep holding record and camera until screen prompts you to push send (green phone) to reset.
The phone isnt magician or wizard, its a charmer. Jam black and S110 are both magicians.
Click to expand...
Click to collapse
You are the only Person who have some knowledge.
my problem is solved.
THANKS....
Jorgee said:
Here's the T-Mobile link to the specs corresponding to the picture posted :
http://www.t-mobile.co.uk/Dispatche...nType=pmt&pmid=7242&menuid=ctl_phones_details
Go Figure
Click to expand...
Click to collapse
Now thats really funny
I brought CHT9000 at July 2006 and O2 Trion at August 2006. Both have disalignment problem. At first I thought it is ROM problem and happened for certain model and S/N only.
I try 4 ROMs : I-Mate, Dopod ENG ROM, TyTN and New CHT (Taiwan) ROM.
I installed these ROMs and without installed 3rd parties software. Also I proceed all necessory method to prevent this problem happen such as set a false exchange server for activesync and unclick USB to PC (Check my post).
http://forum.xda-developers.com/viewtopic.php?t=58633
However, all of them have this fuxking disalignment problem. :twisted:
It is hardware problem and I have 2 possible methods to produce this disalignment happen to your TyTN:
1. Body Heat. i.e. Charging, Surf internet and Long talk.
2. Apply very little pressure on LCD. i.e. Cleaning your LCD Panel.
You will find this fxcking disalignment happen again. If you encounter this problem, don't realign the screen manually. Wait few mintues and you will found that it will re-align again. Now you can re-align the screen manually this time.
I already sold my device and not recommend anyone to buy it. It seems that HTC cannot solve this problem and perhaps they don't know the causes.
If you want to buy it, please wait. :wink:
If you brought it, good luck and godspeed.
i have sent mine back because of it
This is the HTC official answer to my request:
Good Afternoon,
There are now procedures in place for fixing the screen alignment issue with the TyTN devices. This is a hardware issue that we have identified and we are offering a replacement to owners of affected devices with two conditions.
1: The device must be returned with all accompanying accessories.
Everything that was in the box when you bought the device must be in the box when you return it.
2: The device must be a Genuine HTC Badged device. This means that the device cannot be a Vodafone v1605, an O2 XDA Trion, a T-Mobile Vario II or any other device based on the TyTN, but that is not actually a TyTN. For these devices, you must contact the Network/Reseller for further advice on this issue.
If you meet these two provisions, you may contact your nearest repair centre to arrange the swap. Please place everything back into the original box and arrange to have the device picked up. It will then be tested to confirm that it has the problem, and then it will be swapped for a replacement unit.
If you are unable to return everything, you will be eligible for a repair under the warranty. For this also, you can contact your nearest repair centre to arrange this.
:roll:
Cheers
Mine goes back Tuesday hopefully the replacement unit will not have the same issue.
There are people who fixed their issue by ROM Upgrade. There are people who just bought their Hermes got this problem. Some has SN HT63XXX. There also some people who been swap their units, and the issue came back.
Well, as I see it, HTC does not know how to fix this issue 100% since it is also happening on some Dopod 838, 8125 (models with sliding keyboard).
I will upgrade my Trion this weekend, and if this issue persists... I will sell this baby and reactivate my trusty Universal.
:lol:
A colleague was able to fix the problem by untightening the two screws on the back of the display and retightening them (not quite as tight as before). His device works without screen alignment problems ever since.
It seems that the screws are too tight which causes tension on the LCD resulting in screen alignment problems.
Magnet Theory
A friend of mine with CHT Dopod 9000, did this and fix his alignment issue.
"When Slide the keyboard, there's a magnet that activates the landscape mode. It's in the back of the screen when you slide it. ( I tried to put it near a magnet and the lanscape activates!)
Then I put a tape at the back of the small protruding (hunchback) just enough to be able to slide it close. This will decrease the magnetism receive from the main body when is close. Then for a week, it's good than before that I need to align 5x a day."
I know this true, since I met him and check his device. I even tried to massage his display, or run it hot.
I will try it myself... let u posted...
The problem only started for me after I installed a screen protector (Martin Fields, an excellent choice!), and since then I've had to re-align the screen every day. This morning I tried the screw trick, so I'll report back if it works for me.
Also I should point out that I have an MDA Vario II, so it looks like those of us who waited are no better off.
The next problem I have to deal with is an unresponsive 'C' key on my keyboard... :wink:
alignment issue is SW or HW or Both...
But unresponsive key(s) is really a HW, my first one has the "L" and backspace.. and it always like that, try to press it fast and it will not register all unlike the rest.
goodluck to all of us!!
:wink:
Anyone that has sent their TyTN back in for repair/replacement for the screen crapalignment, please report back when you get your TyTN back. I want to know if it's worth making the effort to get mine replaced, seeing as I live in Australia and I don't exactly have HTC repair centres, mainly on account of that they don't sell this here. BUT if it's worth getting it repaired/replaced, i'll try to make arrangements with my ebay seller and/or some overseas repairing people.
Cheers guys,
~Louis x_.
Re: Magnet Theory
sectorlord said:
A friend of mine with CHT Dopod 9000, did this and fix his alignment issue.
"When Slide the keyboard, there's a magnet that activates the landscape mode. It's in the back of the screen when you slide it. ( I tried to put it near a magnet and the lanscape activates!)
Then I put a tape at the back of the small protruding (hunchback) just enough to be able to slide it close. This will decrease the magnetism receive from the main body when is close. Then for a week, it's good than before that I need to align 5x a day."
I know this true, since I met him and check his device. I even tried to massage his display, or run it hot.
I will try it myself... let u posted...
Click to expand...
Click to collapse
really ? I will try. Thanks
Tried, fermin's method seems to work！Thanks！
Hello everyone. does anyone have the same problem as my problem now? my exec cann't hold the stylus anymore if i turn it sideway down the stylus will drop out. any idea how to fix . thanks.
A lot of us have this - some have suggested wrapping a tiny piece of tape around the stylus.
Matt
try the above method or use a bit of bluetack or putty on its holder that will hold it stable and yeah its a very common problem as its holder is of plastic and gets loose within a month only so dont worry .
thank you so much I will try it.
Have a "small" problem with my touchscreen, it requires to be aligned every day,and by that i mean that the alignment doesn't hold much long...that means sms typing is extremely hard when you push one letter he shows you another that lays next to it .Is it due to the touchscreen or the system....i didn't do any ROM update i still have the original software on him:
ROM Ver.: 1.12.01 GER
Radio Ver. : 1.12.00
ExtRom ver. : 1.12.151 GER
Many thanks!!
i think it it the problem of touch screen
i think it it the problem of touch screen.after extrem use of touch screen its loes the alinement for this you replace the touch screen from your hardware guy.
Thanks for all
Hi i fixed the problem with a ROM update and i didn't install extra programs that i had before like ( Pocket plus or Calendar ++...... ), anyway now i don't have to align the screen. I don't know is it the ROM update or the additional software but the touchscreen is now working perfectly.
So if someone else have a similar problem don't replace the screen right away.
Thanks
it's hardware problem.
my xda mini also..
but i know how to fix this problem.
Maybe with you it was, my MDA is now working perfectly and i don't need to align my screen every day as i did before.That doesn't mean that all have such a problem,i am only telling you my experience with it.
Best regards from Vienna
Hello, in my magician is not everyday, hapens all the time that i turn on it.
I had replace it 3 times, but i can find a good dealer of touchs. You knows one that seel a good touch?
regard's,
Ricardo
Guys,
I've had that problem for a LONG time and today i finally got tired and decided to fixed it...here's how i've done it: You just need to lift a little bit up, a few small metal pins which are all around the touchscreen (see the picture in attachment). This will force the touchscreen to remain in place and will end all your problems related to touchscreen alignments.
Regards,
Keeper
so it does help? what do these pins do?
IS THERE REALLY NO SOLUTION TO THAT PROBLEM???
(* the pins have nothing to do with the touchscreen, they are what holds aluminum shell on the plastic chasis)
i had an o2 mini with 1.11 rom and its touch screen was not quite sensitive.. had to tap or drag stylus very hard..
but after upgrading to 2.03TX.. to my surprise.. my PDA now has very good touch screen response!
hi, i have this problem
I tryed to re-flash rom or adjust metal pins but the problem persists.
Anyone have another solution?
Plese help me, i want to save my pupil
i have the same problem. the o2 is really a great little phone but i think im going to be forced to upgrade
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Trullalero said:
Anyone have another solution?
Click to expand...
Click to collapse
Probably it's problem with flat wire that connects screen with mainboard.
You need to open yours xda, find that wire, unplug it from mainboard, clean its pins with alcohol and plug into again.
From this time mine xda doesn't decalibrating anymore
khuan said:
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Click to expand...
Click to collapse
hi khuan thanks for the great tip.. you save my $$$!
I was just thinking to upgrade my mini since it response too slow when i tap the screen
but now it works just as it is new.
guys.. try khuan tip.. it really works!
khuan said:
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Click to expand...
Click to collapse
what exactly do you mean?
can you be more specific ?
Screen Setting
new_ppc_user said:
what exactly do you mean?
can you be more specific ?
Click to expand...
Click to collapse
Hi
My cell also had the same problem. There is a bunch of wires coming from the back of touch screen, these wires fix inside a socket. There is a black color cover that fix the wires inside that socket. During mishandling that cover got loose, that's why your cell loose the screen setting. I fixed that cover and now my Jam works perfectly. (Do it if you have the courage to open your cell)
Ali
Hello, I just bought a used O2 mini and had this same problems. I finally found a quick way to restore the calibration that goes out every restarts.
Using resco registry editor, I found the data stored here->
HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/TOUCH/CalibrationData
So I make 1 clean alignment and quickly went and export the Touch key into my Storage. Now every time the alignment goes haywire, I just import the data back. Hope it helps.
Hi to all.My name is carlos and im a long time user of pda and windows mobile.I cant go back to nokia again,-im hooked!!!My question is-i have opened my S200 and a litle rubber pieçe has fell from the interior and i dont know were is his plaçe.Anyone has a lue were is the plaçe of this litle fellow?
anybody??
hi again.My s200 has the windows mobile pro vincent rom 7.0.0.7 and i must say its the best ive seen.Again ia litle help in my problem is welcome sinçe i dont know were that pieçe of rubber bellongs.all the mecanic parts are allrigh but mi fear is that ruber is for protecting some sensitive chip inside the phone.Ive instaled the messenger has been provided by one of the threads above and it works fine.
Any help...please
carlos
Noboby´s home?
it doesnt protect any vital chip, i would have seen that as i have totally dismantled mine before.
i think it was something to do with voulme slider but its been over a year since i took my prophet apart lol so i cant remember.
if it works and nothings different then is it a problem? its always a bummer when you have a "screw or bolt" left over isnt it
Hi.thank you for your response.In reality,is all working so i dont go on dismantling the phone to put the pieçe in plaçe sinçe this isnt as easy to deasemble as a nokia.Deasembling this phone is a tricky job and i may end with a broken phone.
wish you well to you all.