Hi everyone. I'm new with my XDA1.
I've download this file XDA-developers-SER-v12 and XDAtools.
Still cann't install to my XDA1 since there are no clear instruction.
Can someone guide me or tell me where can i get the instructions please.
Thanks.
if you already have the SER12.exe ... connect your device to the USB cradle and power ... after sync just run the exe file and follow the screen instructions
Note: better to remove the SIM card before
Still cann't install the XDA-developers-SER-v12
Error message said "cann't access the ROM files" :?
Is it i'm missed out some steps?
Please help!!!
what's your current ROM and bootloader versions ?
Guys I am the only one whose not able to download some files from ftp://xdaupload:[email protected]/Universal
I can download most of the files there except for what I want :x UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
I need help please :idea:
use ftp://xda:[email protected]/Universal instead of ftp://xdaupload:[email protected]/Universal for download
Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)
Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english
Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does
Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks
Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.
dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.
Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?
no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site
you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier
I put it in the bootloader state and still the same message
I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done
Sorry, but i don't know what to say. Are you using the original cable?
Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4
Hi. I have got MDA-1 from T-mobile. I'd like to change my language in to english. Will You be so kind as to learn me step by steh how I should to do with this change? I've got usb cabel and device. Thanks for Ypur kindnes.
http://forum.xda-developers.com/viewtopic.php?t=6628&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=5740&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=5213&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=2969&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=313&highlight=change+language+english
One of them should clarify.
Otherwise use the searchbutton yourself....
Stefan
I'm new at this sort of things and I dont understand some of those instructions. I wrote I'd like You to tell me step by step if u can.
It depends on your currently installed ROM, but normaly this should work:
1. Download new ROM from http://wiki.xda-developers.com/index.php?pagename=ROMVersions or http://www.romkitchen.de
2. Make a hard reset of your device
3. Reconnect your device via ActiveXync (You can use guest partnership)
4. Run the downloaded exe file an follow the instructions.
5. Enjoy your new language
All this has been told hundreds of time.....
Stefan
Which of ROM'a will be the best for my MDA? I have current ROM version 4.00.33 GER. Where I have to run my exe file ? on PC or PPC ?
OK. I have done it Thanks for help I'm so grateful
I've done it but now my MDA doesnt connectong with my PC. I have not got on MDA any communication program. I've got nothing !! What should I do now ?
I recently downloaded WM2003 on my sx56 and was working good, but when i would use the internet it was way to slow. I decided to upgrade and accidentally installed ROM version 4.01.16 and all my settings changed to TMobile. Now my question is: I want to cook WM2003 SE again but when I do the DOS window tells me there has been an (ERROR: Get Connection Type - An excisting connection was forcibly closed by the remote host). Can someone please help with this issue please.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Still need some assistance
I followed the instructions but where do i get the Source from. Do i have to download a ROM.
http://www.romkitchen.de/
I Cant still downgrade my system. Can Someone help please
Can someone please tell me what to do because i already downloaded software and ROM and I still can downgrade to v.5.15. I tried everything but i cant seem to find files ending in .nb. Where do i find this files can someone please help. And if I get them what do i do, and how do i download them to my phone.
nb* files are in the downloaded ROMs. Just unzip the downloaded ROMfile and you will have it....
Stefan
Thank You
Thanks It really worked, I really really appreciate everything you guys do, and all the information given. Once again thanks.