Hi and HEEEELLLLPPPPPP!!!!
Has anyone managed to connect the Mda Compact to a G4 Powerbook via bluetooth to access the internet on GPRS account??
I cant get the Apple to create a bluetooth dial up connection with the mda.....
Will a change in stack be useful eg bluesoleil / toshiba???
Are there any modem scripts for the mac??
Has anyone achieved this via PocketMac??
I am trying to connect a G4 Powerbook with Tiger to a unlocked UK T-Mobile MDA Compact runnung Qtec 1.12 English rom with big storage hack on UK Orange.
:shock:
sorry always wanted to use one of those emoticons.... :wink:
Any help would be greatly appreciated.....
Riz,
Have been trying the same with both QTEK 2020 (forgot HTC name) and S100 (Magician) both on panther & tiger. Haven't gotten past the Bluetooth issue. In terms of GPRS scripts http://www.taniwha.org.uk/ has some, but not for our favourite devices. Am desparate to get same sorted. Do believe HTC's Bluetooth implementation ha something to do with it. remember on my 2020, I did run a Bluetooth utility to increase BT functionality, but to no avail....
Sorry not to have been of more help
Phil
Welcome Mr. Apple ;-) I am also running on "the only real system". We have to wait for http://www.markspace.com/missingsync_windowsmobile.html Will not take longer than 2-3 month any more.
Thankyou guys for your responses desperate (sometimes girlie like) cry for help. In my quest I have found that there are many like us stuck in the void between ppc and osx.
I even tried creating a connection using virtual pc !! Desperate times etc .....I can’t wait to try this Missing Sync ..sounds too good to be real so I have Emailed the company with our queries.
Have any of you guys tried it yet ???
Thanks again
sorry should read "to my "desperate girlie like etc
will poof read next time
sorry should read "to my "desperate girlie like etc
will poof read next time
Actually the mark/space site says The Missing Sync for Windows Mobile will be available before the end of June, not 2 or 3 months.
So any day now.
BUT, I have read in another thread here that both mark/space and pocketmac programs promise a whole lot more than they actually deliver, and are buggy.
Are there no other alternatives?
i think that the panther version is available now for the MDA Qtec s100 etc and the tiger version will be in the form of a free update??
it will retail for 39.99usd...could be a costly experiment??
has anyone tried any of these products in the past???
please could you point out the thread where you saw the negative reports on pocketmac and missing sync
thanks
Yes, long time ago I used Missing Sync for Palm Clié. It was stable, simple and great. Im quite sure, the new version for my MDAc will be similar. Thats the reason why I already deleted PocketMAC from my Powerbook and don't sync anything till MarkSpace software is available.
If you have an old version from Missing Sync, equal if Palm, PPC or whatever, you can updrade for just 19 $
By the way, not very actual, but helpfull:http://www.markspace.com/support/remove_pocketmac.html But you also have to check everything manually and yourself, cause with Tiger there are new and more files less.
Hi Mr Macmax,
My knowledge of palm based systems is not to good. Please could you tell me ......
Did you sucsessfuly use the missing sync to connect the clie via bluetooth to your powerbook?
Did the clie allow you to use it as a modem to connect the powerbook to the net??
This is what i want to achieve with my MDAc and powerbook via a bluetooth connection. I am hoping to use the MDAc as a bluetooth GPRS modem for my powerbook.
I was wondering if the missing sync program would bridge that particular gap??
Thanks
Hi riz,
well it is a very long time ago I used Missing Sync for Palm, so I can't really remember what was possible and what not.
But it's important to know that we have 2 possebilities to sync our Baby on a MAC: MissingSync or PocketMAC. Last one is a, sorry, pain in the ass, so rests MissingSync.
If it will work like you described, well, als them. But I'm quiete sure it will work cause it already worked with PocketMAC. Otherwise it can be a problem regarding to the right phone driver. May have a look here for modem scripts: http://www.taniwha.org.uk/
Thanks for your advise Mr Macmax but i have already been down the script path trying generic and ipaq scripts in the hope to fool the G4...but its just too smart...
I am tempted to buy the panther version of missing sync that is available now.... i think?? set up panther on the powerbook and give it a go??
still....could be a costly experiment
BLUETOOTH TO BLUETOOTH.....WHATS THE BIG DEAL!!!! ....one of the teeth needs a filling!! is there a doctor in the house!!!!!
sorry....this is really starting to bug me.... :twisted:
hello again ....
Has anyone managed to create a Gprs connection with the MDAc and Mac via a SD Wifi card so the phone modem is used to connect the Mac to the net?
Also.....
Anyone have experience with GSG script creater ?? Could it be used to make a bluetooth Gprs script for the MDAc so the Mac recognizes the bluetooth modem???
http://www.macronsoft.com/pages/en/gsg.html
anyone ??
Did you use an AT String. This is neccessary for windows. Look for the AT String needed for your provider and paste it into the properties of your bluetooth modem. At least, this is the way it works with windows.
I have managed to get it working with XP. I am trying to get it working with a Mac G4 Powerbook
..thanks for trying though....
The thing is, it shouldn't depend on the Os. The SSA service is standardized, your stack will be the same as for windows I guess (Widcomm, isn't it?). The only thing you need to set is the AT string, the rest should be done by the profile itself (i.e. giving you a dialog where to enter the connection settings).
The problem is that the i can not get the Mac to recognise the MDAc as a modem... so i fall at hurdle one..
..and i am not to sure where i would enter the init string ??
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
Hey guys, I was wondering if you could use AIM through wifi on the tmobile MDA because I dont have a text message package. Thank you
Great question.. I was wondering the exact same thing...
Yesssssssssssssss
how would you run AIM on the MDA? I've heard that there has been problems trying to get it to run on there.
I do know that it is possible for it to work using wifi... Thats what I used with my old pocket pc the HP 5455... So I know that it is possible for it to work using wifi... its just a matter of finding the program..
I use AgileMessenger
I use AgileMessenger to connect to AIM
Does AgileMessanger use wifi?
Yessssssss
Hi All,
I'd like to use my Hermes as an USB modem for my laptop. I have checked the net and found some articles about it.
But, it says that I have to use wmodem application on my Hermes. At this moment I have a HTC 2.11 ROM on it (I have changed my T-Mobile hungarian, because it was a piece of ****), and I can't found this Wireless Modem application.
Can anyone help me to solve this USB modem issue?
Modem Driver and Manual D838Pro
Thank you very much.
But I need the PPC WModem application, because it is missing from my ROM installation, or maybe I'm so stupid to find this.
can someone post the procedure or software in english for wireless modem for hermes!
thnks
wmodem is here http://forum.xda-developers.com/showthread.php?t=306041&highlight=WMODEM
This is how I do it.
I just connect it through internetsharing.
Disable Active Sync and see that you have a local network to your windows mobile. Just Start webbrowser.
Works great for me.
Hey!
I'm new to all these great programs, so could someone explain to me how to use the WModem, what I can do with it, and what it is for?
Thanks in advance!
Why bother when you can do it much easier with Internet Sharing. Just plug in the USB cable. Starting Internet Sharing and off you go.
Agree, using Internet Sharing is the best & easiest way to go!
o rly?
galaxys said:
Agree, using Internet Sharing is the best & easiest way to go!
Click to expand...
Click to collapse
im using the wm6 rom for htc universal...
tried using the internet sharing as the wireless modem is a bit complicated,
everytime i try it, i turn off activesync and then is says the device is not recognised and nothing happens... im on 3 mobile if it helps...
my friend has a mda vario 3 and his works jus fine on t mobile... any help?
I used the internet sharing in my hermes, but seems there is just one problem that is really irritating. Everytime, after connecting, I have to soft reset the phone because the disconnect button will not respond. The only to disconnect is through the gprs/3g soft bubble icon near the signal strength. After that when I try to start the internet sharing again, it will just not work. Anyone have the same experience?
Binyo said:
Modem Driver and Manual D838Pro
Click to expand...
Click to collapse
I try to use the PDA (WM5) as a modem for Notebook Vista powered, I need a specified driver, and different procedure?
With the driver available in CD OEM I cannot perform the connection....
thanks in advance
ok so a friend of my just got upped to the tilt from the 8125 and he passed it off to me. I already have a cell phone so i was thinkin maybe since i have wifi i could just fix it up so i have a little wifi browser at home... only problem is I cant seem to get it to work. firstly i had my router set on wpa2 so i changed it to wpa/wpa2-psk and i put in my password and it says cannot connect because i need a certificat. can some one help me so i can hack this dev to work with no sim as just a standard comp? maybe just install like windows 2000 or xp or something? idk im new to the smartphone modding culture. Thanks for your time.
so no one can help me? Does anyone know if i update to wm6 if i can get onto wifi with no sim?
Hi guys
My girlfriend has a palm treo pro but she has a problem and i was wondering if you could help her out cause i am not able to.
She can't connect with internet explorer to the internet. I have tried all the connection setups provided by her provider but it still isn't working. although she CAN send e-mails and receive e-mails and connect to windows live messenger.
Is this a registry problem or am i still configuring some stuff wrong.
plz help
with kind regards,
kuraki
It doesn't work on either Wi-Fi, or ActiveSync, or Data?
nope. wifi not working either. can you help us?
Have you tried using another browser like Skyfire or Opera? Give them a shot and we can see what happens from there.