Hi, I'd like to know if it is possible to update and flash new bios/rom using bluetooth as my mini USB plug is damaged or if there is any other way to do it without using mini USB.
thx
The other method is SDCard, see the wiki for help
no bluetooth is not controlled from the bootloader it's in the rom and the rom is what is being flashed
think trying to saw off the branch you are sitting on
Related
I have just bought a singapore Sim locked handset .. I need to Flash a english rom and unlock it .. i have downloaded the rom the Hard spl but before that i was trying to update using SEUS but it went to the bootloader mode and itdetected the drivers then suddenly says one of the usb is malfunctioned and cannot reconize the device now i have tried 3 systems but nogo...i need help to get hardspl installed without using the usb port and a computer and then i can flash a eng rom on it using msd card.. and i have tried hard reset/chking in bootloader mode/and active sync also not working
have you try this?
Program --- Setting -- Connection ---USB to PC
clear ..... Enable advanced network funcionality
(Clear this check box if Activesync does not recognize the device)
goodluck
Or flash it with a generic ROM using the microsd method.
EDIT: Never mind. Read the first post too quick.
Thanks a lot .. it worked .....i unchecked it and it worked i have a english version of it now ..now one more problem left is simlock any solutions for that???? thnks a lot for helping me appreciated
Hey, I was looking to flash my rom to a better one however when i connect my htc touch to my pc the light turns on on my phone but the computer does not pick it up, doesnt even make a noise or show up in my computer. Have tried soft reseting, hard reseting, reinstalling windows device manager and tried to use on another computer but again the computer does not pick it up. Cable looks to be in fine condition, could this be a fault with the phones software? Any help would be great thanks.
if u r using mikys rom then i have same probs.but switching to oynx solve it.do this
no, its the default rom, the one the phone came with. it just wont connect, is there a way to upgrade or flash my rom to a better one without connecting to my computer? how do i upgrade or flash my phone
Hi
It happened to me a few times, changing the cable solved it
Good luck
i will recommend u to upgrade to onyx 6.5 release 2 and just try to check with another cable toooooo
Help
jbrown17109 said:
is there a way to upgrade or flash my rom to a better one without connecting to my computer? how do i upgrade or flash my phone
Click to expand...
Click to collapse
I want to know too. My miniUSB port is broken.
Try sdcard flashing http://forum.xda-developers.com/wiki/index.php?title=Elf_SD_Card_Flashing
Hi all,
I just did my first experiment at cooking a ROM (did some tweaking and built the ROM) using OS Kitchen. After I copied the ROM to my phone using ROM Update utility, the phone is stuck at this screen:
"Preparing the phone for first use. The Today screen....etc etc"
I am now not able to establish an active sync connection to my PC in order to load a new ROM. What can I do? Pls help...
I have installed the HSPL by jocky
Thanks in Advance
Whew!!! Got it working. For a moment, I thot I had bricked my phone. These r the options I considered:
a) Booting the phone using the mini sd card. I guess one has to use Gold Card for that but I didnt have a mini sd card reader on my PC in the first place so that option was out.
b) Next I read in the forums abt starting the phone in boot loader mode, and this is what finally worked. It seems, as an alternative to getting an activesync connection, one can connect the phone to the PC using USB and then start in bootloader mode (by pressing vol down and end call). This way, a connection via USB is established between ur phone and PC. Now flashing any ROM is just a cinch using stock roms or custom roms (using the custom RUU)
Pfew
Got stuck too and used this trick to load stock rom.
Thx a million
Hello! I have a Nike 100. I had recently changed the original rom with a new one. I didnt have any problems till recently it stopped working on usb mode. Even if i try to put it in bootloader it still isnt recognized.. even though its charging normaly... I thought the problem was in the cooked rom for some reason and i tryed following the info on the forum to install a new one using the microsd and but it doesnt find it.. althougth when u look with file explorer on the cooked rom it finds it correctly.. i sync it with bluetooth since it doesnt work in another way.. Any Ideas are welcome! Thanx in advance..
Guys,
im in extremely deep **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt a ROM code error and 00028002 'Not Allow" error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection on the first place...which IS NOT WORKING NOW!!!...im using a 512MBLeo,which is now stuck at SPL-1.42(previously HSPL)...im sitting duck here guys...i really really need your help on this one.i cant boot normally into 6.5,i cant flash a new ROM,i cant use bootloader and flash a LEOIMG using SD card cus it returns the above errors and i cant use my PHONE!!!...im extremely frustrated and helpless.please help guys...thanks alot...
If I understand you can still get to bootloader correct?
Exactly what official ROM did you try to flash?
Where did you get the ROM from?
Just so you know you can still flash HSPL with the 1.42.0000 SPL you have.
ROM code error usually means that official ROM is not for that HD2.
I flashed '1.48.405.2' which i downloaded from the net(http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/)...I tried flashing LEOIMG(SD card method) from Elegancia GTX v5.0 ROM,but thats returning the same error plus...it gets stuck on the white 'loading screen'.I know i can flash HSPL or any other stock rom with my current SPL,but my USB connection is not working...thats exactly the problem now...any idea where to get the actual stock ROM for my HD2?...Maybe that might prevail...Thanks.
kawshigan said:
I flashed '1.48.405.2' which i downloaded from the net...I tried flashing LEOIMG(SD card method) from Elegancia GTX v5.0 ROM,but thats returning the same error.I know i can flash HSPL or any other stock rom with my current SPL,but my USB connection is not working...thats exactly the problem now...any idea where to get the actual stock ROM for my HD2?...Maybe that might prevail...Thanks.
Click to expand...
Click to collapse
Yes go to htc.com amd enter the serial number of your HD2 (can be found under the battery) and it will only let you download the ROMs that are for your HD2. Also make sure the HTC site you go to is for your part of the world, It has links on the site to go to HTC sites for other countries.
As for your no USB go to your device manager in control panel and find your HD2 ther while it is connected via USB it will be listed as unknown, mobile device, or something like that but it will be there. Just click on it once to get it to drop down to the actual device and then right click it and select update drivers and then select from internet. If this does not work download the latest version of Windows Mobile Device Center (WMDC) and install it to your computer and this should give you the drivers you need.
Alright ill try all that and get back to you.Thanks alot for your advice!
Error Resolved
First,i would like to say thanks to you, T-Macgnolia.The ROM downloaded from the HTC website, which i flashed via sd card worked like a dream...However, the same cant be said for my USB connection though(I tried everything you said).My computer still keeps dropping USB connections intermittently...i miraculously managed to flash HSPL 3 on my HD2 just before the USB connection dropped.I was running WM 6.5 and android previously and i want to dual boot wp7 and android...which needs a USB connection(for MAGLDR and WP7)...Charging works fine via AC charger and via USB port(its just USB connection itself...any ideas where the fault lies?).i personally think the problem lies with my USB cable(as other devices work fine with the USB ports in my laptop). Guess i just have to buy a new micro usb cable(...thanks for your advice again.
kawshigan said:
First,i would like to say thanks to you, T-Macgnolia.The ROM downloaded from the HTC website, which i flashed via sd card worked like a dream...However, the same cant be said for my USB connection though(I tried everything you said).My computer still keeps dropping USB connections intermittently...i miraculously managed to flash HSPL 3 on my HD2 just before the USB connection dropped.I was running WM 6.5 and android previously and i want to dual boot wp7 and android...which needs a USB connection(for MAGLDR and WP7)...Charging works fine via AC charger and via USB port(its just USB connection itself...any ideas where the fault lies?).i personally think the problem lies with my USB cable(as other devices work fine with the USB ports in my laptop). Guess i just have to buy a new micro usb cable(...thanks for your advice again.
Click to expand...
Click to collapse
Yeah buy a new cable and see if that helps. If the problem pursists then you probably have a problem with the pins in your micro USB port of your HD2 that are randomly loosing connection to the main board because the solder points for the USB port is become cracked, loose, or just seperating for some reason. You might can find a cell phone repair shop that can resolder the connections for you are just Chang the intierior main board out for you ifcthis is the problem.