Hi there,
Recently i had a problem with my jasjar: my sd card (1gb) apperars to be always "uninstalled". I tried to reinsert the memory card, soft reset the device, using another memory card... but the jasjar simply don't "see" the sd card installed.
I have many programs installed on my sd card... and I need space to store files, so please HELP! Anybody knowing something about this annoing problem?
Thank you all!
hey check in your registry settings that drivers for sd card are installed or got deleted by mistake
Thank you indeed for your replay! just a question: how can I see the registry? And what is the sd card key to verify? Thank you again.
hi, i had the same problem..i was using mini SD card with SD adapter and my universal could see it...so i just bought myself a new SD card from sandisk and have no problems now. the sandisk i am using now seems to be slightly thicker the the kingston i had.
thank you cudo, but my sd card is a "normal" size, with no adapter... and I used it with JJ untill 2 days ago, than always "uninstalled" :-(
i am getting the same issue is there any workaround?
All,
I have a 2gb Sandisk Mini SD Card in my Qtek 9100 and up until today its been working fine. However my Qtek started to behave strange today and suddenly would connect to my pc via ActiveSynch nor could it read the sd card.
Well in fear of loosing all my stuff on the sd card I tried in other phones, on another pc, in my camera....jsut to save it but I couldnt.
I ended up doing a hard reset of the Qtek since I couldnt solve the ActiveSynch issue and now its up and running.
BUT.....my SD card is only on 1gb now. :-( So what can be done ? Format it....yup but I dont have any program to do it with....
Help help help....the next step is to send the sd card back to the company I bought it from but then I'll have to wait for a new one
Please help
Jakob
Well I have just formattet the storage card with StorageTools and when I have the card in my qtek it shows 1gb
But if I put it in my camera and then connect it to my pc I see 2gb....
i had problems on my card and formated using wm5torage from the desktop...and it is working flawlessly, i suggest to do that...but usually that size problems happen in fake cards...do u filled the card some time or at least passed the 1gb limit?
Hello! Although this is my first post on the forums, I have been reading extensively through these forums for the past ferw weeks since my acquisition of my new to me MDA (i.e wizard G3). Yesterday, I took out the sd card for a few hours and now when I put the card back in the wizard is not recognizing the sd card in the file explorer. I put the card in the PC and it is recognized fine there. I reformatted the sd card via FAT and inserted it back into the wizard but no luck. I soft reset the phone several times but in vain. I then eventually hard reset the wizard and THEN inserted the sd card but still not read. I tried going through the My computer--> Manage --> Disk Management but the sd card is not showing up on it.
The sd card is clicking in and out fine from the wizard. Any help would be greatly appreciated. All my medical programs were on the SD card. And with that many programs I cant just work off of the memory.
Thanks in advance
Sohaib
update
I installed the wm5storage and the program does not recognize the sd card either
Update
-Tried formatting to FAT with computer and re inserting did not work
-Tried Formatting with WM5storage and THAT didnt work either
-CID unlocked the phone, installed 3.08 ROM, and then "Crossbow reloaded" with 2,19 UK Radio Rom, tried inserting the sd card and still not work
-Tried formatting with "Flash Format" and the program says "no storage card detected"
I am thinking that I may have damaged the pins or something when I was reinserting the SD card, initially when I noticed the problem
2 options in front of me now!
1. buy another mini SD card and see if that works
2. Open up the Wizard to see if it is a hardware issue
Opinions etc would be greatly appreciated
thanks
sohaib
Ive got the same problem with my Qtek 9100
hi i had a near identical problem occur with my xda mini, as in after removing and reinserting my sd card it was not being recognized. i happened to have a old mini sd card (only 64mb tho!) and that was recognized. so i just bought another 2gb sd and its been fine ever since, but saying that i have not removed it from my mini yet! which is getting a little annoying now as i was given a copilot kit and the software is on a mini sd card
Try removing all formatting and then allow the phone to format your card. I had a problem with my second MiniSD card after formatting on my PC.
Insert your card into your card reader. Right click "My Computer" and click on "Manage". Then left click "Disk Management", find your card and delete the partition. At this point, you can then stick the card into the phone and it will ask if you would like to format the card. Even though the computer will not recognize the card, your phone will.
Snapin Disabled
I tried the approach of right click my computer--> manage --> disk management --> but it tells me that the snappin is disabled and when I go into start--> run--> gpedit.msc --> to enable the disk management it still does not recognize my storage card in the disk management. Hence I am unable to remove the partition.
Thanks for the replies guys, any suggestions on how to enable the specific snapin on XP?
Thanks
Sohaib
New Mini SD Card
OK, so in attempts to diagnose the problem, I went out today and purchased another 1gb minisd card, inserted it into the wizard and................NOTHING. Still no luck. Does this narrow down to the problem to a hardware pin related issue? Or could this still be a software problem. I figured that a new sd card may resolve the issue but unfortunately not, any suggestions would be greatly appreciated.
Thanks
Sohaib
Bump
Ideas? Suggestions? Recommendations?
Thanks in advance
Sohaib
If you tried another card and a new ROM, I would say it is a hardware issue, if it's still under warrantee then I would send it in. If it's not and you want to try to fix it yourself, there is the HTC wizard maintenance manual (Google search) that will give you step by step instructions on how to disassemble it. Or sell it on eBay then use the money to buy a new one.
I'm using a micro sd with a mini sd adapter for my cingular 8125 phone but my phone won't read the card it keeps saying not installed. wat am I supposed to do? help please
wmontae said:
I'm using a micro sd with a mini sd adapter for my cingular 8125 phone but my phone won't read the card it keeps saying not installed. wat am I supposed to do? help please
Click to expand...
Click to collapse
Make sure the card contacts are clean and inserted in the slot properly.
The SD needs to be:
formatted to FAT, not FAT32
less than 2GB
clean
my sd card has broke, it wont recognize any sd cards i put in. i couldnt find a good guide so i wanted to know if there was one so i could fix the problem myself since its out of warranty