which software can i use to be able to connect to wifi networks that have a key?
thanks
Windows mobile 6's built in wireless connection configuration allows me to connect to my WPA wifi and I'm sure it also does WEP.
If you mean 'have a key which I do not know' then the answer is - no such software.
Even if we were to condone such illegal activity as hacking WiFi which we do not, the processing power of mobile devices simply isn't enough for such task.
Otherwise you will be automatically prompted for the key by the built in software and you just need to enter it correctly.
Related
Hi there,
After fuddling around for a while trying to get my XDAiis to hook into my Netgear broadband network, it dawned on me that maybe the advice to try it without security enabled might be worth a try. And lo and behold, it works, with WEP security turned off.
The problem is, I can't turn off WEP security in my work network - so I'm looking for help on what I need to do settings wise to make my XDA talk to the network properly.
So, here's what I do (and what doesn't work)
Open wireless manager, choose the settings of the Rocket network (my work network) and go to Network Key.
Under Data Encryption, I choose WEP, and enter the network key and the proper index (which I've made great pains to check IS the right key and index).
Now, no matter whether I set the Authentication to Open, Shared, WPA or WPA-PSK or if I then change the settings under the 802.1x tab, and cycle them so I've gone through all possible combinations, when I try to go online, I always get a "The page you are looking for cannot be found" error.
So, can anyone tell me what the settings are supposed to be for the Network Key tab and the 802.1x tab? If I know, and it's just plain not working, then at least I know there's something else the matter. But, like I said, i know I've entered the right key and index - and, like I said at the beginning, the XDAiis does hook into the network with security disabled.
Thanks in advance for any help you can be.
C.ya
Jsedit
Ah,
Don't worry, sorted it myself (I think).
In case something like this occurs with anyone else, after tweaking away, I finally sorting things by setting the router to Shared Key authentication. If it was on Open - or on Automatic, it just wouldn't work, but when I changed the Router to Shared Key, all has fallen into place.
Have a nice day.
Jsedit.
fwiw, I had fun trying to connect to my wifi network until I realised that I had to enter the 32 char key into my XDA in uppercase...
thks jdedit yr post sorted me out nicely
ahh forum power
paul
Unsure if this matters to you now...
Ok, I've a Netgear DG834G at home and I've never had a problem connecting my wi-fi devices to it. These are the settings I have under the 'Wireless Settings' option in the left hand pane when logged on to the router. They are of course my own personal preferences and straight forward and depending on the sensitivity of your data you may wish to change the encryption strength and whether you use a pre-shared key..
Wireless Network
SSID - (The name of your network)
Region - Europe
Channel - select the channel you wish to use (the number of channels you have available is dependent on the region) I currently use channel 11
Mode - g & b
Wireless access point
Enable wireless - ticked
Allow broadcast of name (SSID) - ticked
Wireless isolation - un-ticked
under Wireless Station Access List
Turn Access control on - ticked
I've added New Stations Manually and explicitly stated the mac addresses for each of the devices I want to allow access to
Apply these and go back to Wireless Settings
Security Options
WEP - radio button selected
WEP Security Encryption
Authentication Type - Automatic
Encryption Strength - 64 bit
WEP Key
Enter a Passphrase and click generate. This will generate 4 Hexedecimal keys. Select the key you want to use by clicking on the radio button. The key you select is used on your device when you set the device up to connect on the first occasion normally and they must be exactly the same!
Hope this helps you if not someone else! :wink:
I was trying to connect my tytn into my wifi network, the phone detect the network, but appears a invalid IP like 169.254..............and I cant make the phone connect with the correct IP provided by my router. What I have to do to make it connect ???
WiFi Connection
schwaitz said:
I was trying to connect my tytn into my wifi network, the phone detect the network, but appears a invalid IP like 169.254..............and I cant make the phone connect with the correct IP provided by my router. What I have to do to make it connect ???
Click to expand...
Click to collapse
Schwaitz
I'm sure you'll get other suggestions to solve this but I have found that sometimes the regular WM5 connection settings get corrupted and it loses the network WEP key. Rather than spend time trying to fix it I use the following freeware download which does it all for you - i.e resolves conflicting IP addresses etc. Only thing you need to enter is your network key. Hitchhiker is designed for those that like to wander about looking for Unencrypted hotspots to log into but it's just as good at logging into work/home networks. It does remember settings and can be set to log in automatically.
The first time I used it, it came up with some error or other but I think I just did a soft reset and it worked fine.
Hitchhiker v0.4 beta 1
• "Summary: "Hitchhiker" helps you to connect your Pocket PC to the wireless Internet. Simply click "Connect" and it will try all nearby public access points. Hitchhiker will handle all settings for you and perform complicated tests to ensure you can connect" (Their words not mine)
Available from
http://www.freewarepocketpc.net/ppc-download-hitchhiker-v0-4-beta-1.html
Hitchhiker requires that you have installed:
.NET Compact Framework 2.0 Redistributable
This is obtainable from:
http://www.microsoft.com/downloads/...6b-356b-4a2c-857c-e62f50ae9a55&displaylang=en. I suggest you install this first.
Whether you choose this possible solution or not, I find Hitchhiker a quick way to connect to networks without putting the settings in yourself and just a useful tool to have.
Mike
I have a wifi router at my office - Netgear, I am using WPA-TKIP as security options, the problem i am facing is - i have setup a passphrase on the router, but on phone, it just asks for network key, i need a way to enter a pass phrase, are there any updates to wifi for WM6 which can help me to get out of this situation?
I cannot change my existing WIFI settings on router, my other machines and devices are using the same configuration and now if i change it to WEP or something else, i will have to upload all other machines.
I cannot move to an open system as well.
please help
wpa without wpa-psk wont protect your network from being used by other ppl. i suggest u to choose wpa-psk (pre-shared-key). u choose a password and it is easy to setup for the other clients on your wireless lan. just enter password one time on the other clients and they are online. and wpa-psk works with wm6. greetz spaxxi
Where it says Network Key is where you enter the passphrase as used on your router.
On my SPV E650 (vox) I have WPA-PSK with data encryption set to TKIP
Use IEE 802.1x network access control box ticked and EAP type as smart card or certificate.
Also I have set networks to access as All available but on my netgear under wirless settings I have set up enable access list with the mac of the phone (which you can get from connection settings or with wirless on the phone switched on the router should detect the mac from phone broadcast which you can then accept as a trusted station.
This means only my phone can connect to the router even though my ssid is broadcast.
Hope that helps.
MrMond
the sip client you have works
w pa-st k is the best most efficient way to run and your net gear has 3 different ways in but the paraphrase is fine. use the para phrase where it says key go right through it, if i recall the client has ports but ur going direct you dont need it. Your just and to log into your router regular client is for web based app go right at the router use wififofum and then just make sure your sip is on meaning registry is live dont worry about the settings. Let me try to make sense all next ell are voip just an ip i don't care what anyone says. your do not need a web based sip just leave the sip alone but try activating it remember it a phone turn it on but 1 thing give out static ips u will succeed. static wpa-stk intra net ur just taking to the device no need for any barriers. you could hook up computer up slap head phones and a mic in the analog jacks from the 80's and you have no succeeded in ? Voip. all that matters is the router is set right and sees only you for the duration of your call. Most likely wil end up turning that whit wpn8xxx into a access point have fun don't ask. But it only took me 3 hours to realize i left to come back into my office for what a paid for call. And the day wireless is everywhere i will be a lan expert.
ciao good luck don't orry just look at it and you will see what makes sense.
Hi,
I have an HTC Elfin that has no problem connecting to a home network with WEP encryption. But at work, I cannot connect to the network with WPA-TKIP encryption. My phone just tries to connect for a few seconds and then the status of the access point goes back to "available". I've verified the network pass phrase, as it does work with my co-worker's netbook. What is the problem here?
BTW, I've been reading up on this problem and somebody mentioned the fix of turning on/off the wifi (turn on wifi, connect, turn off wifi and then on again), but it doesn't work for me:
http://forum.xda-developers.com/showthread.php?t=327928
dtran707 said:
Hi,
I have an HTC Elfin that has no problem connecting to a home network with WEP encryption. But at work, I cannot connect to the network with WPA-TKIP encryption. My phone just tries to connect for a few seconds and then the status of the access point goes back to "available". I've verified the network pass phrase, as it does work with my co-worker's netbook. What is the problem here?
BTW, I've been reading up on this problem and somebody mentioned the fix of turning on/off the wifi (turn on wifi, connect, turn off wifi and then on again), but it doesn't work for me:
http://forum.xda-developers.com/showthread.php?t=327928
Click to expand...
Click to collapse
Try to set wifi to best performance instead of best battery first.
Often the problem is also caused by a combination of the router (brand/type) and a Windows based device/computer.
Some things you can try to get a working connection with WPA-PSK enabled:
1. Modify the registry:
\HKLM\Comm\EAP\Extension\25\ValidateServerCert=dword:00000000
2. Modify the network settings:
Settings > Connections (tab) > Wi-Fi > Network Adapters (Tab)
and select "NE2000 Compatible Ethernet Driver" (maybe you have to config a static ip-address).
Thanks for the suggestions. I did all those, except for the static IP since our network admin doesn't provide one. It still doesn't work. One thing I'd like to understand is that in my case, why does the WPA-PSK connection work for the standard Windows environment (laptop/netbook, desktop) but not Windows Mobile? What could be the difference?
I don´t know what ROM are you using, but if it is some of 23XXX Builds, disconnect first the Bluetooth and then connect the Wireless... Should work now...
My ROM is MK_872_05 WWE, from chota_shivaji. It uses WM6.5 CE OS 5.2.21872. Thanks for your suggestion. I will try it out on Monday when I get back to work.
I disconnected the Bluetooth connection and tried again to the WPA-PSK encrypted access point at work and it still doesn't work. Just yesterday at a relative's place, I was able to connect to his router with WPA security. I think there's something different with the one at work which does not work with Winmo devices.
at work do u just have a password or a user/password? are u using certificates?
At work I have a guest username and password that I can use to log in for the WIFI access point. The password changes every week, but I confirmed that I used the latest one. But I don't think there's a certificate needed since my co-worker is able to use his home netbook to log in without anything else except the same username and password.
Guys,
I was trying to connect my Arc to my laptop wifi after sharing the internet connection from the wireless ad-hock network creation wizard but I couldn't find the network in the wireless list on my device.
so If you don't have a WiFi router, but your PC is WiFi enabled, you can use Virtual WiFi Router to allow other WiFi devices to use your connection.
I made some search and I got that application (Attached to the thread)
(Credits goes to conigent.com)
WiFi connection on a SSID, network identifier, that you designate. I choose travelsystem, as this is easily identifiable on my phone. Once you choose your WiFi connection in the Share Connection drop down menu, press Start Virtual Router.
Be sure to run this as an administrator on Windows 7 and enter a password of at least 8 characters. This utility provides wireless security using WPA2 encryption, so rest assured your data is safe.
5 easy steps:
Download the virtual router utility.
Enter in your network name.
Enter in a password of at least 8 characters.
Select your shared connection and start the virtual route.
Connection from your phone or other wi-fi device.
So next time you are traveling, go to your WiFi device, follow these simple steps, and connect to the network that you choose and enter your password. You will see your devices and their assigned IP addresses. You’ll see they all can use the same personal or commercial WiFi connection, without having to pay for it twice.