STK Service - SIM Toolkit - Plz Help - Wing, P4350 General

Hello all,
I have just changed my Operator SIM to a new one. Same number, but a newer version of the chip.
I have an Unlocked TMobile Wing, and now, every 45 seconds my device shows "STK Service" message at the top bar and produces a "Busy Tone".
I have already tried to find at startup directory, plus at Extensions\NewFolder directory at the registry but I could not find a way to disable this annoying thing.
Can someone plz help me with that?
Best Regards,

Did you find a solution ?
Did you find a solution for that ? I just did the same and now this annoying message and sound every time. And it even shut down my screen if I have a program open... Please share how you fixed...

Related

HTC_STK SIM Tool Kit

Hi mates,
I've got another problem and hope that I can get some help from the wonderful people here
Sorry I am not good at writing out in short and simple words.. any way, here goes:
I was using the original ROM that came with my O2mini and there is a "SIM Tool Kit" function / Menu (STK) by my Provider (StarHub), that I can click on (from Programs), and then I can check for infos like news, flights, lottery, etc.. and my Provider will send me an SMS on whatever info i selected (need to pay for each msg received though..)
I believe this function is built into my SIM card.
This "Sim Tool Kit" is not the Dual Sim card thingie that I believe have the same name, "Sim Tool Kit" .. basically, it's a menu with information for me to grab via SMSes.
Now, as mentioned, I've successfully flashed my ROM to 1.11 (WWE) and using the "2 byte" method to get BigStorage.
BUT, the STK function is not really working well now. When I first click it, i'll be able to get the infos I need, but when i close it and then try to come back again, I'll get a "stuck menu" that i cannot click or select anything. The window can still scroll up and down, but i just cannot click and select on any info anymore until i soft reset it.
and when i use vbar to try to close it, it cannot be closed or minimised also..
I could still go back to my Today screen by clicking on Start/Today, open other Apps, but when i come back to this STK, it's stuck at where it was again.
on vbar's task switching drop down window, it shows no name to the app, but at the side, it shows "HTC_STK" and when i go to "Running Programs List" from the Programs menu, it does not show that the "HTC_STK" is running at all.
So, now the work-around is to soft-reset after each use, but i think there might be something wrong somewhere.
Any body any idea?
Thanks!!

a few questions about WM6 needing asking

Hi all, i recently flashed my spv M3100 to wm6 (now on t-mobile uk) instead of orange and it's still showing the orange disply on bootup i've googled on how to remove that and have the default htc showing but banging my head on the keyboard, as i've changed the shell for the phone and that's the only thing what's left to get removed
1) in wm6 how do you get the click when you touch the start menu like it used to make in wm5?
2) under wm5 in messenger when i used to get a message or somebody used to come online it used to pop up a box like the sms does, but in wm6 all it does it pop up the little msn man at the top of the screen and vibrate the phone is there a way to get the box pop up (if i havent got the today screen open i miss what somebody says or havent a clue who's just logged in)
3) how do i do video calling in wm6 as there used to be a video call button above call but in the dialer in wm6 it aint there
4) is there anyway of stopping the phone going into lock mode when you connect it to the pc as active-sync 4.5 keeps telling me the phone is locked,when i unlock it by entering my passcode it reboots active sync then the phones locked again :-(
beisdes them questions wm6 is lovely
spl 2.10
radio 1.41
wm6
supercid unlocked
Hi, there are answers to all your questions already posted in the site. On the brown bar at the top of the site is a search function. Give that a try and you should find everything you need.
Good luck!
Couple of answers
You could google using XDA in the search, for example "XDA change splash screen Hermes", I guarantee you'll find an answer to that one mate
Q # 1, Go to Settings, Phone, then select Short Tones from the Keypad drop down.
As for #3, go in to TweaksUI under settings, and you'll find a check box for Enable Video Call in the Phone tab.
And for #4 there ought to be a check box on your password screen in Active Sync to Remember password....??
Good luck,
Thx for the advice
removed the op logo proper, and got the video calling back but still cant get the click just on the start menu, but i can live with it like that, now to fill this 4gig mem card now also when i inserted the phone into the usb a couple of time's active sync comes up with do you want to unlock the phone when it's insterted to the pc (or something like that) so i clicked on yes and it's ok now, on wm5 it used to ask for a password on the pc, but in wm6 it locks the phone device :-( just had to get used to that
Found 'em - menu click sounds!!!
Knew I'd seen them somewhere - they're >HERE<!!!!
If you download and install the WM5 CAB file, that'll give you the clicks (which seem to annoy most people ) when you tap on stuff in WM6
Enjoy!
Mark.
Thx Mark for the link, got me phone working 100% now, if your ever in Manchester, I'll buy you a pint for that m8, been looking for this for omg from when i upgraded to wm6, thx bud

Ringtone problem...can anybody plz help? :(

Hi everyone,
I got an old HTC MDA recently so I am new to this whole pocketpc world. I LOVE IT already by the way!
I have just installed a dialer skin I found on the web called "The Equinoxe Wizard reTouched" or something.
It looks great and works great, however it has messed up my phone a bit. First of all, the roaming icon showed up after install but I was able to hide it in the registry. Then I noticed the ringtones cannot be changed or played anymore. I use to load up mp3/midi ringtones and now all I get is the annoying roaming ringtone. My audio ones just play silence with NO vibration even if enabled.
I tried uninstalling the skin but it doens't fully uninstall and messes up.
Anyone have any suggestions or ideas? I want to avoid upgrading the rom if possible.
plzz help. I'm hoping just a registry tweak is required or something.
thankss
I just realized it only affects MID files. Mp3 files still work. I'm hoping there is just a MID file support fix.
ringtone problem
Hi crazycage,
I had a similar problem on my wizard. After installing a profiling software I wasn't able to change the ringtone and exit the dialog. I searched different forums and found a solution (at least for my problem). I downloaded a software called "Tuatara WM5 Ringing Delay Patch". After installaing I was able to change the ringtones and save my changes. I tried to uninstall the SW again and the fault appeared again. So installed again: Everything was fine.
So if you want to give it a try: http://forum.xda-developers.com/showthread.php?t=258109.
Regards
Huibuh_1
crazycage said:
Hi everyone,
I tried uninstalling the skin but it doens't fully uninstall and messes up.
thankss
Click to expand...
Click to collapse
Disable or delete the files from the /programs and /startup directory. that should remove the program from loading.
Or do a hard rest.

Intresting sms issue

Strange SMS.exe
Right i need a hand from one of you clever folks.
Basically the whole ability to view/send/edit any form of messaging has disappeared, every single link in all of my panels or apps where im usually able to enter the messaging application are dead...i mean there there but when i click them nothing happens....
even when i go in through the start menu etc i wont work...
now i know i can hard reset and start again but id rather not ....just got my setup how i like it.... so if possible need a soloution.
was wondering is there a sms.exe or a messaging cab or something that i can reload from the directory? if so where is it cos i cant find anything like tht when i look via file explorerr....i guess im hoping i can just reinstal the cab and it will all be fine.
thank you for any help.
update
right this is really freakin me out now!! i put my sim in another fone and i cant access the text messages from that either! so it must be a settin or something that i have done on my x1 thats messed it up....ive had a look in all the settings i can find for sms (of which i couldnt find many) and cant seem to fix it....someone please help i have no idea wot to do!
no1_fred said:
right this is really freakin me out now!! i put my sim in another fone and i cant access the text messages from that either! so it must be a settin or something that i have done on my x1 thats messed it up....ive had a look in all the settings i can find for sms (of which i couldnt find many) and cant seem to fix it....someone please help i have no idea wot to do!
Click to expand...
Click to collapse
So maybe your SIM is broken?
Have you tried another SIM card in the xperia?
Hm...but messages aren't stored on the SIM card anymore -they are all in the phone's memory.
I would suggest trying another SIM card.
If this does not help and noone else has an answer, a hardreset would be the best way.
arrgghh
so tried another sim in fone and that dosnt work either...so whatever it is its on the fone and the sim card!
Well I had a similar issue...I would often have to restart the phone in order to get the messaging icons working. The problem was the message delivery report...i just disabled this with xperia tweak. Although it sounds as though your issue could perhaps be a little more complex.

[q] words displayed in the dialogue box not seen completely

PLEASE HELP ME
THERE IS SOME PROBLEM WITH MY DIALOGUE BOX
THE PROBLEM IS DURING THESE CASES :
1) AFTER CALL COMPLETION WHEN BALANCE IS NOTIFIED
2) AFTER SENDING MESSAGE WHEN BALANCE IS NOTIFIED
3) DURING BALANCE CHECK
NOW I WILL EXPLAIN THE PROBLEM :
1st THREE LINES CAN BE SEEN COMPLETELY
BUT ONLY A SMALL PORTION OF THE 4th line is seen there.
ie ONLY THE 1st THREE LINES CAN BE SEEN AND NOT THE REMAINING ONE's
I WAS USING HTC TOUCH AND DIDNT FIND THIS PROBLEM IN THAT PHONE.
SO I UNDERSTOOD THAT ITS RELATED WITH THE PHONE.
PLEASE HELP ME IN CLEARING THIS DIALOGUE BOX PROBLEM
I will attatch the thumbnails.
it's just a thought, but have you tried changing the phone theme? See if the problem still persists!
Actually I have tried different themes but the problem still persists
I have tried Changing the themes and reducing the font sizes
But no use at all
If the problem is there in changing the font size itself,please tell me the correct details
This dialogbox isnt in the WM 6.5 Design, so i think the message shown in this dialogbox comes from a thirdplayer Software that is compiled for WM 6.1 or lower. Usually a Software uses the Designelements from the OS, but there are options for compiling to inherit an own "Designtheme" for this Software only. Check if there is an Update available for WM 6.5.
If this message comes from the system itself, i think you are powerless.
reinstall the soft. I think that's your chance to fix the problem. Do a backup first.
http://forum.xda-developers.com/showthread.php?t=1134317
Does anybody Know How to fix this problem with any ways other than reloading the OS
Like changing the font of DIALOGUE BOX etc
Or increasing the number of lines to be displayed in the dialogue box
Even i am facing the same problem since i bought the phone. only 3 lines are readable and the rest are missing.
at last i did a hard reset n still the same condition exists
somebody please help me
another probem ¡¡¡¡¡¡¡!!!!!!!
can't set any ringtones !!!!
im getting error 'file in invalid format'
\Windows\Rings\Ring01-WindowsPhone.wma File in invalid format. Continue editing settings?'
usually when i select and hold on the mp3 file, there will be an option set as ringtones.
but now that is also missing
i did a hard reset..this problem has gone but soon after few days this bloody error came back
please help me with a solution suh as registry tweaks other thn hrd reset
i m having same pro dude. i also tried a lot to overcome this bull ****, but i think there is no chance to get rid of it.
so for balance check use call process

Categories

Resources