hi guys,sorry for my language and rest, i was searching how can i enter this menu
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
in Wallaby,this is my firend phone and he was trying to upgrade his rom but now he cant install any rom,i thing he must clear registry rom but i dont know how to enter that menu,in wallaby you dont have canera button he was trying other combinations but he cant enter that menu,we are just starting in this so plz help us
wallaby dont have any flash so a hardreset clears all storage and mem and registry too
only devices with flash have the clear registry hive clearing option
thats also the reason why wm5 and up can never be ported to wallaby
Related
HELP
I installed WM2K5 V1.60, happy as a baby.
But by installing the first ppc-program the mda2 won’t reset
I try anything also put the battery out and in it stays at the same screen, see attachment...PLEASE HELP
Do you mean it wont go back to WM2003 ?
If so then , thats because you have installed a new ROM ont your phone ... it will never be able to return to the old WM2003 you used to see when doing a hard reset because that software has been overwrote by the new WM2005 ROM.
There most likely will be a way to downgrade to WM2003 though.
If thats not what u ment then im sorry for talkin crap
You are saying it is sticking on the boot screen, but it was ok until you installed a program? Which program did you install?
try to format storage
you better go tho the wiki page and find how to hard-reset
then go to the boot menu and format the storage i beleave that will solve it
The program that I installed was the [email protected]#$% “MobiMate WorldMate 2005 Professional V3.0.20”
I let the battery out for the night and I tried this morning,
I know I was desperate so you try anything
I try also to overwrite the WM2k5, no contact with the mda2.
If the picture (see attachment) is showing the “hard reset” then I don it, without result...it sty at the start screen (see above)
If hard-reset is other combination, then please show me
Guys please help
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
pschoch said:
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
Oh man, you are an angel
Respect, for the master, who bring my mda2 back to life
Giga thanks mate
Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?
Need to clean the registry HIVE n storage without using that boot option as the mail button is not workin for some reason......cant it be done using a software or a tool ....could someone plz help me with that ...
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
how to delete these data in the rom.
After i tried to reflash the latest rom, but these data in the storage still be there.
How do i should do?
after flashing the new rom do a hardreset (wiki shows how)
hold power+camera+Record and reset the ba by stylus.in the menu choose no yes yes. (for changing values use camera and record button)
Hello,
I have upgraded my Q2020 (T-Mobile MDA) with new rom PDAVIET_ROM_WM61_OS19213_HIMA_SONBLACK
After boot I saw strange info that following SW do not work.
1. psShutXP
2. BTIcon
3. USSD
4. SMS Reciver
5. plm_traylnch_182
6. PhoneService
7. IMSartup
8. pBar
The worst thing is that I cant use Contacts - it does not work
I hade the same situation when I used ROM: 6.1.2a16CS (WM6.1 AKU 1.0)
Could you help me to solve those problems, and find right rom for my PDA ?
rozkwit
did you do the last step in the flashguide where it tells you to
choose yes to clear register hive and clear storage?
if not do that
No,
I just install new rom on the boot mode, and restart it after.
Could you provide me instruction how to install WM6.1 correctly?
Piotr
works
I clear register after installation I works properly.
Many thx for your help
Piotr
Hello, I have the same probleme ! COuld you telle me how doing this ? Because I don't understand !
Great Thanks my friend
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Thanks for your answer,
But, my pda is not an HTC, but a MIO.
I use the hermes kitchne whiwh is compatible for my MIO.
So there is a problem on the rom !
Any idea ?
Great Thanks !
this is how it's don with htc himalaya dont know how MIO devices clear storage and registry but if wm5 and or wm6 was made for it
it have to be able to do it somehow
I had this issue when i was being lazy and not reading the instructions fully with my Himalaya. It only seemed to happen when going from one WM6 ROM to another and the, not so quick, fix was to flash back to the WM2003 each time.
Reading the instructions properly means i no longer have to do this.
Might work for you.