Hello Guys,
I found this Forum after a long search.I have a qtek 2020i and when I was trying to upgrade the ROM it all went dead and it shows on screen as usb or serial v1.01. I dont know what to do Iam desperate.Someone told me to flash the ROM ,
1.How do I Flash the ROM , what is the procedure
2.And then how do I proceed so that my QTEK works and iam ready to use it and make calls.
I would be really Greatetful if someone can help me out here . My email is [email protected] or you can post the reply here too.Please Help
Emmanuel
Hey buddy,
Have you looked in the "Alpine" section of the forums??
If you go to the upgrading section of the Alpine forum, there are step by step guides to flashing your rom.
I wouldn't worry too much about the phone being stuck in bootloader mode (thats where the screen says usb 1.01 etc), as when you flash the rom successfully it will fix that.
My rom recommendations:
Check out Deathnoise's custom rom, it has all you need (and everything you don't need has been stripped out!!!)
RR
Related
Hello everyone, I tried to flash the ROM of my phone because is seemed CID locked /would not upgrade to W6/. Either do I followed all the steps very carefully, I ended up with a bricked device. It shows the operator logo /T-mobile/ and then a white screen. Unsucsesfully tries to connect to Active Sinc /connection shows limited or no conectivity/.
I understand that you are tired to teach stupid newbies like me, but I would be very grateful if you once again take some of your time to explain how to bring back from deadland my phone.
I have tried to follow the instructions in this thread http://forum.xda-developers.com/showthread.php?t=327203, but on step #8 it says that there is no devices to build ROM.
Excuse me if I wrote a lot of stupid things!
It turns out that I will have to install the original ROM. Can anyone help me find original ROM - T-mobile MDA Compact III, OS 3.4.0.0, IPL 1.13.0001, SPL 1.13.0000
THANK YOU!
hi you can try this one it works great
http://member.htc.com/ruudownload/t-mobile/TMobileWM6Step1-TMNL.aspx
xx beertje
Look at the tmobile there is an rom update to wm6 for free.
Hi.im trying (with many ROMs) but everytimes i return to my previously ROMS (i have A modded ROM,i flash a B modded ROM,after that i return to A modded ROM without see the B ROM)
How can i do?
What?????
xplain detailed please...
i need to know what is a modded rom
what is B moded mod
what is the issue
and what is your info IPL SPL and more things
about wich rom you have
and what you want too...
trying anothrer Room i bricked..any way for unbrick?pls
You'll never get a valid advise or help untill you post the vital data of the phone.So always post DOC Chip version of the phone and try to explain as simple as possible what you did and what exactly is the problem.
No one can help you like this.
Sorry for double posting but the brick came out after the 'upgrading problem' anyway how can i get the DOC chip version?
My device is ,ops was.....ç_ç , an I-mate K-JAM G3 , what else...
ok, have you ever noted the IPL/SPL version of the phone,it always displays at the first splash screen written in Red usually,do you exactly remember all those numbers ? were they something like 1.xx or 2.xx or 2.xx.0001 ?
k-jam phones come as both G3 and G4.
sure a G3 , i dont remember the precise numbers,but first time i flashed (months ago) i remember that i choose rom for G3,sure 100% it is/was a G3
Ok,download official k-jam rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from the following link and flash to recover back to its default status,then download WST_4.2.2 tool and run.Post the report generated by the WST tool here.
ftp://ftp.clubimate.com/
well I think I misread the threads. I understood that since my htc was unlocked that I could flash a spanish rom to it and I went ahead and flashed it it is a cingular 8125 well after the flash ended now the htc8125 only turns on in the three color screen and it says.
IPL 2.25.0001
SPL 2.25.0001
what I am supposed to to now is my phone bricked. help please.
Well you should flash your phone with this "ROM" and then do some more reading.
thank you myhtc but will this get my phone working again or can you please point me in the right direction. Also I can not download from the link that you posted can you upload it somewhere else please.
Reflash using the wizard love rom. You might have trouble finding it if the link I have included is dead. Thats the only sure way. And make SURE your battery is full or at least 75% when you do this.
http://rapidshare.com/files/23763082/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
i was finally able to download wizard love how do I use even though the wizard turns on it seems like it dont want to connect using active synch what am supposed to do
Well after trying and doing a lot of reading and with the help of some members from this forum got my htc working again and got a spanish rom too.:d this is what i had to do
flash my device using the wizard love rom
flash my device with hard spl
and finally flash the spanish rom
thanks a lot forum.:d
Hello, I have a small problem and it seems I can't find a way to fix it. I want to flash my HTC Touch2 from it's Orange Romania Custom ROM to the original HTC ROM but for the life of me I can't do it. I found a lot of threads on google all pointing out to different threads here on xda, I tried different options but none worked.
I am sure this issue is log solved by now so could someone tell me what to do?
My phone is Orange locked and when it boots this is what is on the screen:
R 3.54.25.25
G 61.55t.25.38H
D 1.37.95995
I have little clue what these are or what they represent, I presume the firmware and radio. Can someone direct me to a thread where there is a step by step tutorial on how to flash the original rom or at least a tutorial to get me to a point from where I can flash the original rom.
You can also post here the steps on how to flash this phone I won't mid
PS: While trying different methods of flashing the ROM I got different errors so I'm stuck.
Please help it will be much appreciated.
Cheers
Well?? Can someone help me pls?
did you HARD SPL your touch2 before flashing? just a precausion type question...
I have tried but I'm not sure if it worked or not. I presumed that by now there are some tools or tutorials out there that have all you need to flash the phone again. The ones I found didn't work, I got different errors while running the original ROM so I'm stuck and I don't know what to do.
i have used this process - it worked
http://forum.xda-developers.com/showthread.php?t=1373404
HELLO!!!!
My Qtek S110 was in spain,I wanted to change it,
but the update I used was said to be not meant for
my device,
Now my phone is displaying no backlight on it,it only
show ((Series V1.02...please I need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Install its stock ROM for its region.
You may find it at shipped-roms.com
Thanks
Thanks
But I have checked there ,,I couldn't find it
Help
Am lossing my phone ooo!!!!
Some one help me out,,,
Its writing:
the Rom image that are trying to use is not design to work on your device,,,
Pls what do I do