Related
Hi,
I've just got my MDA PRO: so far I love it and hate it.
Its works ok in gprs and 3g mode. The wifi has worked for 3 occassions, it never connects properly after it is switched back on again. Now I can't get a stable connection at all.
I have a standard 802.11b access point. It has proved to be very reliable in the 3 years I have had it. Everything can connect to it, bar the MDA PRO.
I have tried setting the AP to 1-13. Doesn't make any difference.
I have used 128bit bit and no WEP.
The AP is 1m (3 feet) away, so no problems with a weak signal.
The firmware is standard, see below for version.
I have done soft and hard resets.
For me wifi is essential.
Can any one help ? I have tried to collect some of the other ROMs from the ftp server, but most don't seem to be available.
firestormer said:
Hi,
I've just got my MDA PRO: so far I love it and hate it.
Its works ok in gprs and 3g mode. The wifi has worked for 3 occassions, it never connects properly after it is switched back on again. Now I can't get a stable connection at all.
I have a standard 802.11b access point. It has proved to be very reliable in the 3 years I have had it. Everything can connect to it, bar the MDA PRO.
I have tried setting the AP to 1-13. Doesn't make any difference.
I have used 128bit bit and no WEP.
The AP is 1m (3 feet) away, so no problems with a weak signal.
The firmware is standard, see below for version.
I have done soft and hard resets.
For me wifi is essential.
Can any one help ? I have tried to collect some of the other ROMs from the ftp server, but most don't seem to be available.
Click to expand...
Click to collapse
You should update your radio rom. I am using the MDA Pro with my Wifi router (WEP enabled). No issues at all.
What Radio ROM are you suggesting?
I too have problems with wifi and my belkin when set with 128bit encryption.
It works fine on my mates Belkin with no security.
Frustrating YES!
found solution
I've fixed my wireless problem - my old wireless router is failing, I found my laptop was dropping the connection too. So I went and bought a new Linksys WRT54GS. Very happy with it, works with all my wifi gadgets with significantly better signal strength too. I've got it working in WEP, b & g mode.
Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!
Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...
Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!
Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...
hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX
tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.
still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!
problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.
kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
pvanbrakel said:
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
Click to expand...
Click to collapse
Chek on Universal forum, there are some guuys with the same problem
But a hard reset should help
Don´t forget to vote!
KPeriod said:
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
have you solved the problem?
i have the same same issue with modem-router wifi Sitecom wl
Every 3 - 5 minutes while browsing, my wifi will "hang"
it doesn't disconnect, the wifi icon is still there as if I was connected,
if you had solved can you tell me how fix it?
Bye
Hi,
It looks that I've got the same issue as you have - the connection is still active (at least, the icon shows that), but after a couple of minutes, I cannot access any website.
Did you guys find any solution to this problem?
thank you very much
Ive had that problem with a few routers(i know the answers late, but maybe it will help someone at least). I had to disable the routers firewall. Once that was done, no disconnects. Weird.
Hi Friends,
Hope you could help. I have a X1 and I been trying to get it connected to my DIR-655 thru wifi with no avail. Surprisingly, I have 2 wifi network at home and it could get connected to the other one. I am sure it is not a router issue as my iPhone could connect to it using same login settings. Both my wifi routers are on WPA2. This is really puzzling me.
Cheers and thanks,
I have trouble with WPA2 security as well. WEP works just fine, though.
Sfkn2 said:
I have trouble with WPA2 security as well. WEP works just fine, though.
Click to expand...
Click to collapse
But the thing is it is working with WPA2 with my other router. Very strange.
I have the same issue. Can't connect to my wi-fi router at home, though have no trouble to access others. Or better to say I get connected, but internet is working either too slow and too short, or not working at all.
I did have this issue when I gott my X1,
after a few days I unplugged the router for 2 mins and plugged back in, then waited until it started up and tried to connnect and it worked.
dont know why it worked it just did so maybe it will help you?
Have you tried logging on to your router, and allowing your X1's IP address.
Thats what i had to do on my netgear.
well, I've even arranged a static ip for the mac-adress of my x1, enabled DMZ for that ip, but still doesn't help.
I've pulled the plug of the router out many times so far, doesn't seem to help.
routers are basically rather small computers
their firmware have bugs
which is why the manufactures
put out firmware updates to fix those
newer wifi devices like phone of often give issues
with older routers with older firmware
updating firmware is pretty easy and can be downloaded from the manufactures site
yesterday I tried again and I don't why, but it is working now still a bit slow and some programs don't connect (QIP, SPb Online tv etc), but at least browsing works.
p.s. forgot about router firmware, gonna try it tomorrow.
Is anyone else having issues with the WiFi stalling and having to reset it, even though signal strength shows as excellent?
It's not a channel interference issue as I know what channels are in use, plus its doing the same on 3 different networks where other devices work fine, I'm using WiFi fixer to reconnect but its still problematic.
What have others found to be the best solution?
Samme issue here. Wifi keeps on disconnecting/loosing the connection and is most of the time unable to reconnect. Have to either turn wifi off/on or choose "forget" and reconfigure the AP my Hero in order to get it to work again.
It´s a Linksys WRT54GX running WPA/WPA2 + TKIP.
Have used an iPhone 3G on the same router for a year now without ´any´ problems.
I'm using WiFi quite often but I don't have this problem with my Hero.
Are you absolutely sure that there isn't any interference? It might be that the Hero is just a bit more sensitive than your iphone.
Today I found G-mon at Market which scans around for WiFi-networks. Perhaps you'll find out that there is a network that's interfering constantly. I've had that a few years ago and then found out that the bus-company uses WiFi on their busses which uses the same channel as I did with my WiFi-network.
Thx for the tip. Checked and no interference.
Also having this problem with a Linksys WRT54G. No WPA though.
I don't trust this router at all; using WPA and connecting a Dell Axim X51v to it in the past used to knock out WLAN on router, needing a hard reset.
same problem here. Wifi is disconnecting randomly within a few meters from the Airport extreme. It also reconnects again...most of the time....without me doing anything.
i'm also having problems with wifi - using a linksys befw11s4 with wep. i've got everythign else turned off - have followed all the instructions i can find here in the forums, and not had any success :/
If you press the Menu button in the Wifi settings you can select Advanced. There's an option there that defines when Wifi is disconnected. If you set this to Never than the Wifi connection will be stable. (At least in my case it is).
Again, thx for the tip but this is not really considered a "solution" but rather a workaround.
I don't like the idea of having it on "allways on". A real battery drainer and it shouldn't be necessary.
I had similar issues with my wifi (Linksys WRT160NL) until I installed "Wifi Fixer" from the market on my hero. Since then wifi runs without problems!
I had similar problem, Linksys WRT54G v1.0 running fairly old (but latest available) Linksys firmware, with WPA/PSK.
Yesterday, re-flashed router to Tomato (based on HyperWRT), setup for WPA2/PSK(AES) and now all is working perfectly, no problems at all.
So looks like some incompatibility between the Hero and the Linksys firmware, for WPA.
Well, I'm running the latest firmware for my router but have now done some other configuration changes and it seem somewhat consistent with your findings.
Previously it was running in a "WPA, WPA2 + TKIP" mode but it has now been working flawlessly since I change it to "WPA2 + AES". Hence:
- WPA2
- AES
=
- WPA, WPA2
- TKIP
=
Info, update on the router: I'm having a WRT54GX, not WRT54G.
interesting; I had no choice but to upgrade, as the newest firmware for the v1.0 WRT54G doesn't - I believe - support WPA2.
Since I had many other wireless clients working fine with WPA (not WPA2), but not the Hero, one wonders if there are some WPA bugs on the Hero that get tickled by older routers, or just that the Hero is being less lenient than other clients.
glad yours is better too, anyway
I found that wifi performance and stability on the hero improved a lot when I changed my AP from dynamic 802.11 b/g/n operation to 802.11g only. I've seen other boxes with linux having similar issues with this AP (D-Link DIR-655), which points towards a driver issue. Wifi works better on Linux kernel 2.6.30 and later on notebooks so things should improve once HTC produce a build that include a more recent kernel. Wifi was quite a headache on notebooks too with the drivers in kernel 2.6.27.x that is included in the current hero firmware.
I have same problem - frequent line drops whne full strenght signal shows
I also have a Linksys WRT54G - never had any problems before.
tried wep and wpa -no difference.
Also tried some "always On" utility from the market place, it only helped reset it quicker.
As stated above, mine got more stable when fixing router to WPA2+AES but I now realize that I still do experience connectivity issues, although less frequently then before...
i don't think this has anyting to do with the router. I got a router from HUAWEI,forgot its brand, but not linksys for sure. I've tried the university wifi as well. they all have the same issue.
Mine is working great with a Belkin.
Looks like a problem with the Linksys firmware.
Anyone tried a firmware upgrade on the router?
Uqbar said:
Mine is working great with a Belkin.
Looks like a problem with the Linksys firmware.
Anyone tried a firmware upgrade on the router?
Click to expand...
Click to collapse
Indeed, if you read up just a few posts, you'll find that question answered
that said, although things seemed initially to get better, I'm still seeing regular drop-outs with the upgraded router, and now still with the Hero upgraded to the HTC 2.0 ROM.
I do note that it seems to drop most when I'm sitting quite close to a different strong wireless client, e.g. a laptop. Perhaps the Hero just isn't a strong enough signal, and gets swamped?
Anyone else notice a correlation between dropouts, and proximity to other clients?