Hi,
A Couple of times a day my atom exec using the bluetooth handsfree kit is very loud and distorted and unusable. I tried 2 other handsfrees and it is not them. Tried turning off the bluetooth on the phone. no better. tried rebooting the phone and it's usually better. But turing flight mode on and off always fixes the problem.
Has anyone else had this??
I am using the 2006721 official rom. Is there an update to just the gsm software to fix this?
cheers, Richard
Related
Hi,
When making calls I can't hear any sound at all....neither can the other person.
I can record and playback using the dictaphone function with no problems. I can also play back all sound using windows media player. and all other sounds within the XDA such as volume increase/decrease, beeps etc....
But when using the phone I can't hear anything :? ...does the XDAII have one speaker or two ? any help on this would be greatly appreciated...
Also holding down the green phone key does not activate the speakerphone function ?
BTW I have already done hard and soft resets
ROM VERSION 1.60.00WWE
ROM DATE: 12/03/03
Radio version 1.10.00
Protocol version 1337.18
ExtROM version 1.60.50
Regards
b11gy
Does the phone work with the headset.? There is only one speaker as far as I know but 2 settings for phone/pda.
yes the phone works with the wired and bluetooth head set !!
Is this something that just started happening, or has it done it since a ROM upgrade?
I have the same problem appart from I get no sound from the wired heatset either. Not tried bluetooth as i dont have a bluetooth headset.
How long are you holding down the button? You hold it down after dialling the number for about 3-4 seconds, you should then get a popup informing you speakerphone is active.
No volume on unit
I have the same problem and it comes and goes. Anyone know how to fix this bug entirely?
No sound during call, speakerphone works and headset works.
I have the same problem:
No sound during call, however speakerphone works and headset works well. There is no sound only when I use it as regular phone. Person on the other line can hear me well all the time.
When I raise volume during call I can hear peices of the person on the other line, at the same time as phone beeps that it reached sound maximum.
This happened after phone was dropped and it hard reset itself automatically.
I am trying to reboot it now with different ROM.
Headset jack hasnothing to do with it, since speakerphone works well.
If anybody has any idea please share.
Thanks
xda 2 sound problem
Unfortunatley I have the same problem ;/
Identical as b11gy
Could anyone help us?
After rom upgrade the problem is identical
Hey.. did it happen after unlocking the phone?
I've got the same problem, Sound and mic work perfectly until I call somebody, I've got a wired headset, the speakers work during a call, but the mic doesn't.
I've just updated the phone from wm3 to wm5, but I had the problem before I updated, and i'n still having it. Does somebody have a solution for this problem?
The problem is not in Windows, because I updated windows from 3 to 5, it's not a hardware problem, because the notes-function work fine.
in an other topic I read some people think the phone is in headset mode, but if that is the case, mediaplayer etc. would only play via the headset.
Does nobody have an idea where to look?
I cant recall any more what was exact situation but as far as I remember I had same problem on 1010. Please check that part of the forum (wallaby), maybe it help.
A lot of pople had that with 1010, as far as I remember somehow we fonund that solution that worked for most of the people was to leave qtek on a dry place for a day and then charge it. That was the way I solved the problem second time and first time I patched it and it started to work (win 2003).
Heres the thread http://forum.xda-developers.com/showthread.php?t=222433 maybe it help someone.
I've searched a bit, and can't find a solution to the problem I'm experiencing. When I got the phone last week, it discovered and paired with my bluetooth earpiece without issue. Now it won't even detect the bluetooth device?
I did install: Closeall, omapclock, smartskey, and lokiwiz unlocker. Sometime during or after, bluetooth stopped working correctly. Are there any known conflicts between the above applications and bluetooth? fyi- I did try my earpiece with another phone, and it works fine.
I should mention that I inadvertently deleted a file called "ssdaemon" (or something close to it) from the startup menu, during the smartskey install. I performed a hard reset and the file returned. Bluetooth still does not work after the hard reset and several soft resets. I've also tried playing with the blutooth settings to no avail. How do I resolve this issue?
Between this issue and that damn speakerphone being stuck on while using a regular earbud style earpiece this buggy ass phone is pissing me off! The freaking speakerphone stays on, and I can't get it off unless I perform a reset. :evil:
This is really annoying because I'm hearing impaired and rely on either a special blutooth device or a hearing aid adaptor (I can't use a cell phone in the normal fashion, all I hear is static). These two problems currently render the device useless to me.
I think that loading a different rom or waiting for cingular's update will help, but I'm not sure. Any help on either of these issues is much appreciated. Thank You!
Nick
No ideas or advice?
I'm running DCD 3.0.0 rom and I found that everytime I turn off my bluetooth headset and bluetooth on my phone that when I go to make a call I cant hear anything from my phone, I've tried turning on the speakerphone too but nothing, I don't know if the other end can hear me but the only way I can fix it is by soft-reseting...
is this a known problem? is there a simple fix? or am i doing something wrong here?
t0mmyr said:
I'm running DCD 3.0.0 rom and I found that everytime I turn off my bluetooth headset and bluetooth on my phone that when I go to make a call I cant hear anything from my phone, I've tried turning on the speakerphone too but nothing, I don't know if the other end can hear me but the only way I can fix it is by soft-reseting...
is this a known problem? is there a simple fix? or am i doing something wrong here?
Click to expand...
Click to collapse
Hmmm... is the volume turned all the way up in the system settings along with the volume for calls?
I have this same problem. I think it is related to Voice command. Do you have VC?
This happens to me 1 or 2 calls after turning off my headset. When I turn the headset back on, the audio works again. I tried turning BT off but that didn't do it along. The fix (so far, I think) is to activate VC (push the right mapped button), and say "cancel". This may need to be done in conjunction with turning BT off. That may reset the audio and ensure it is mapped through the phone speaker, rather than the headset.
I am not 100% sure on this fix yet, as I just figured it out this morning. I think it is related to VC because VC obviously has other problems related to BT.
-BD
I've had this problem sporadically with Plantronics 855. I found that turning off BT before the headset seems to cause my problem. When the problem occurs, a soft reset is the only thing that gets audio back. In general, stock 2.17 worked better with the 855 than 3.35 (I'm now using DCD 3.0.1). The headset will occasionally redirect to the handset unexpectedly and will not resume playing audio after a call. None of this is a deal breaker, just minor annoyances.
bump for a fix please
I didn't want to open yet another Polaris bluetooth problems but none were like mine.
I have the O2 Orbit 2 and I had bluetooth mute problems which were usually resolved with soft reset, I think that ever since I installed HTC's official bluetooth mute fix the mute problems got worse.
Every couple of calls or when I plug something to the mini usb (ear phone, charging, data, etc') my bluetooth is muted, the connection is established and I think I do hear through it but with extremely low volume (less then a whisper, more like back ground noise) the mute almost never fixes itself, it goes on even if I flash with a different ROM!!, what fixes it is playing with turning on and off the connection to the headset while in call or, while in call pluging and removing the wired headset, once it's back, it usually stays ok until (randomly) when I plug something to the usb, at first I though it will never work again (flashing something like 10 different roms...) but this fix is less then convenient, again, sadly the official fix doesn't help.
Anyone knows the return policy to O2 from Germany? I live at Israel so I think it might be a problem...
Same problem for me.
After the original fix, my bluetooth headset is always mute.
I have ordered a new original HTC M200 headset. I hope it will work............
Original M200 arrived today.
Don't work. Always mute.
I have tried to uninstall the original fix without any resultate.
Did you get yours to work?
You can try the on/off trick, I usually call my voicemail when the mute starts and then goto options and turn handsfree off, then again turn it on, sometimes it works after 4-5 tries sometimes after 2-3 minutes...
Sometimes the voice comes back in slow motion!!, I thought at first that it was garbled, but once I have a voice mail of a woman who talked fast so when the voice came back in slow motion she sounded like a very low voice slow talking man.
no, don't work on any headset......
It's a hardware problem ??
Hey guys...just wondering if you guys found a solution to this problem. I have this problem with my touch pro. The A2DP works, but for some reason handsfree through bluetooth is muted and I can't unmute. Hope you guys found a fix and can help me out.
My phone has locked up hard 3 times while using my bluetooth headset. Once while the phone was idle and the other times while answering a call. The screen stays on but is unresponsive and none of the buttons work. I have to pull the battery to reset it.
Has anyone else had this issue? I am using a plantronics explorer 340.
Anyone?.......Anyone?......
i'm experienced the freeze as well. but I don't know if there'll be a solution to this.
now i'm searching this forum if there was a topic regarding this issue. maybe someone already figured it out.
No Bluetooth problems here. I don't use a Bluetooth headset but i do use a Bluetooth stereo headphones for the gym. Not sure if they work the same or not. I have been using the headphones for a week now with no problems at all.