Hi All,
I have in thepast few weeks problem initialize the camera.
When i am tying to start the camera i receive a black screen and all the options around, when i am trying to press on the camera image i received the following error:
Unable to stat camera.
Unable to initialize camera.
I have tried to do Hard reset with no luck.
I have tried to take out the battery for minute or more and no luck.
If i am tring to start the camera without pressing the camera button i receive the following message:
Press the CAMERA button to activate the camera.
and when i do so nothing happened.
I am using ROM:
ROM version: 1.23.707.6
ROM date: 02/08/07
Ratio version: 1.35.00.11
Protocol version: 32.68.7020.10H
Does someone know what is the problem and how to fix it?
Is this a hardware problem?
Regards,
Shay
Related
when i first got my mda II it worked fine, but after an hour of so, after i turned it off, it wouldnt turn on again. after fiddling with it, i got it to turn on again by pressing the call button, then really quick after pressing the on button, but that only works sometimes. the only sure bet to turning it on again is a soft reset, which is VERY inconvenient... it anyone has any idea whats going on, PLEASE help me
thanks alot
Power on problem!! MDA II after upgrade to wm2003se
Hi,
I've got the same problem. I bought MDA II with wm2003. Fiew days after I installed wm2005 but it was unstable and many programs didn't working correctly so I downgraded it to wm2003se. Everything looks quite ok except the problem with power on with no activity (sometimes it srarts with power_on+red_call pressed at the same time but after that green led no blinking).
Now this is:
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: 1.72.165
Is there any idea to resolve this problem?
Best regards,
Slawek
Hello,
I have a problem with my jasjar. Whenever I try to open the camera from the programs menu. I get an error.
Failed to initialize camera.
36001:100:1
What do I do? This happened when I switched from the camera from the back to the front.
Soft reset didnt work.
Thanks in advance.
Anyone?
Have same problem with XDAIIi
ROM: 2.06.00WWE
ROMDATE: 6/14/04
RADIO VERSION: 1.18.00
PROTOCOL VERSION: 1337.38
EXTROM VERSION: DIAMOND 1.2SE
The phone keeps resetting itself and re-installing the programs.
It wont keep any of my contacts. and the screen wont stay sideways.
I'm new, maybe if you have any links to post for me to read i will check them out.
if this phone still good? or should i get rid of it?
Just a little jumpstart would be great, plz dont flame me yet
have you tried hard resetting it?
I dont know how, basically i'm a greenhorn in this. The manual is in german so i cant read it.
Actually i put in all my info this morning, and it reset while i had it in my pocket and erased everything, it hasnt reset yet.
I think it was reinstalling everything because i turned the screen sideways on it..
Do i have the current firmware or versions on it?
Do i need an upgrade?
Hi,
Hold down the power button and then, using the stylus, press in the reset button. This will take your XDA back to 'factory defaults'.
Heres a manual for you...
http://www.my-xda.com/downloads/Detailed_XdaII_UserGuide.pdf
Ok, yes i did that. IT seems that it quit resetting thus far.
Sorry, what do you mean by "thus far"?
Hi After upgrading my p3600 of vodafone to the Rom de Faman 4.02 the camera has stopped working.when I press the camera button to initiate the camera, a error message says:
" It is not possible to activate the camera. It was not possible to initiate the camara "
I have turned to WM5 HTC.'s offcial but It continues with the same problem.
Some advice? Thank you
torenauer said:
Hi After upgrading my p3600 of vodafone to the Rom de Faman 4.02 the camera has stopped working.when I press the camera button to initiate the camera, a error message says:
" It is not possible to activate the camera. It was not possible to initiate the camara "
I have turned to WM5 HTC.'s offcial but It continues with the same problem.
Some advice? Thank you
Click to expand...
Click to collapse
Try extracting the battery, wait 30 seconds and start it again.
oh man thanks... that's so extrange...but it worked!!
thank you!!
I using 3.2 thingonaspring rom in my qtek 9000.When I want to switch the front camera on I get the message ' Failed to initialize camera 36001:100:1 '. I tried rolling back to WM5 but still get the error message. Anybody knows what this is ? Thanks
Uhmm..hmm...anyone ??
Hi,
I have the same problem:-(
Michal
me too. can anyone help?
Bad Flex cable, or Bad board under LCD