HI, my t-mobile mda touch screen doesn't work. i tried to fix it by hard resetting but wont worked. what can i do to fix it?
Related
I got my Tytn few weeks ago, i hard reset it and now has no respond on screen. i tap it when it ask for "tap the screen to countiue", there are no respond at all, does anyone has the issue before? thanks!
Hi all,
Like many people's, my Hermes (T-Mobile Vario II) suffers from screen misalignment issue, and needs re-aligning almost daily. I've done all the mods but to no avail. It is out of warranty so I can't send it back.
Recently, when I try to align the screen (by pressing Confirm button + Message button, or by going to Settings > System > Screen), it just hangs in the "Align Screen" screen - it does not respond when I tap on the target cross.
Only a soft reset can take me out of the screen.
I am using Schap's January 2008 version.
Any idea why please?
But screen now is misaligned really badly and I can't re-align it...
Thanks.
EDIT:
But it doesn't happen every time. Very occasionally it would work...
wywywywy said:
Hi all,
Like many people's, my Hermes (T-Mobile Vario II) suffers from screen misalignment issue, and needs re-aligning almost daily. I've done all the mods but to no avail. It is out of warranty so I can't send it back.
Recently, when I try to align the screen (by pressing Confirm button + Message button, or by going to Settings > System > Screen), it just hangs in the "Align Screen" screen - it does not respond when I tap on the target cross.
Only a soft reset can take me out of the screen.
I am using Schap's January 2008 version.
Any idea why please?
But screen now is misaligned really badly and I can't re-align it...
Thanks.
EDIT:
But it doesn't happen every time. Very occasionally it would work...
Click to expand...
Click to collapse
Answer is easy... Schaps roms have "Ftouchflo" installed. It is nearly sure it is activated on your phone. In this case, the alignment utility is NOT usable. And the pda can stay with a non reactive touch screen till next reset.
Desactivate touchflo by using the touchflo configuration tool followed by a soft reset. So you will be able to use screen alignment.
Just tried and yes! Thats it!
Thanks a lot matey!
You are welcome
Perhaps this should have it's own thread but it is very similar.
My tytn (WM6) has suddenly developed a strange problem. When I go to align the screen, the crosses appear as normal and when I point to them, it appears to be working. Except... After pointing to the last cross, the whole thing starts again, and this happens continuously!
This started when I applied a screen protector and tried to align the screen through it. It was working fine before then. I have taken the screen protector off again, but there is no change.
As I've spent the whole day installing cab files and getting it as I like it, syncing etc. too, I really don't want to have to hard reset it again.
Any other ideas?
That usually means more than 1 point is touching the screen.
That's what I thought but I've cleaned the screen and done the business card trick all round the edges. I can't see where it could be touching...
Any other ideas or suggestions that may help?
I couldn't find a touchflo "disable" button anywhere on my Hermes, but I did go into "Remove Programs" and uninstalled the HTC Cube application, then did a stylus soft reset, then aligned the screen with no problem.
Hi,
For two days i have some screen problems. My touchscreen does not react on touch. If i use the buttons it works but on the screen it doesn't. Sometimes it does work for a few minutes.
The buttons always work (but ther are just a few buttons )
Anyone knows what to do?
Have the same problem. The touch screen goes dead but the buttons below works.
Anyone knows how to rectify this problem?
I had a HTC Touch earlier also and had to give that for repair for the same problem.
I have the same problem with mine, hopefully someone have a solution for this would be very appreciated.
MrQ
Anyone found a solution to this?
My new HTC also now is facing the same issue. The touch screen has gone totally invalid. The bottom buttons work but the touch screen does not. The other big problem now i have is that the phone is locked and i am unable to unlock it.
GOD, if there is a GOD, save my HTC.
I presume you've done soft resets to the phone and it doesn't fix the problem.
Have you flashed any ROM to your Touch? What ROM did you flash if you have? See if it's a common problem with flashed ROM's.
If not, and you're on generic ROM, try to do a hard-reset and see if it fixes the problem. (Hold down both green and red button and poke the reset button while still holding down the 2 buttons). You will lose all the data on your Touch.
If doing a hard-reset on a generic ROM still doesn't fix the problem, then I'm afraid you have a HW problem. Send it in for repair if it's still under warranty.
well u can also try this, it may be because of pressure setting for the screen
"install a reg editing software like PHM and go to HKEY_LOCAL_MACHINE and then DRIVERS and then TOUCH PANEL; now change the value of PRESSURE THRESHOLD. Remember to increase the valur only, try doubling the value acc to ur need"
If you don't have any warranty and a hard reset didn't work (note if you hard reset and it doesn't work you will be stuck at the screen alignment) then you may be facing a defective digitizer. If you are brave you can take a look at this link (complete dissasembly of Elf)
http://forum.xda-developers.com/showthread.php?t=407323
to study how to take your device apart to replace the digitizer yourself.
Hi
My beloved HTC Prophet is stuck at 'Tap Screen to Align'
History:
It fell from my hands and hit the floor with set facing down, touch screen stopped working at once, hardware buttons were working but I couldn't use the phone as I had placed a password for unlocking
I connected it through USB and used mobiler .... everything else except the touchscreen was working fine
I did a hard reset by using MOBILER
unfortunately my cell does not go fwd from 'Tap Screen to Align' as it doesnt accept any Taps
Repair:
I went to (an unauthorized) repairing shop where they instantly replaced its (upper) touch screen, but in vain.... they say they cant understand the problem
Kindly help me ... I dont want to lose my beloved prophet
Looking forward to your help
Bilal
The LCD on my G2 seems to be faulty. The backlight turns on, the buttons function, but I can't see anything. I've tried to take the battery in and out, and even tried to do a hard reset, but the screen won't show the options for the hard reset. Does anyone else have this problem?