Hi all,
Can someone enlighten me on this?
I have an O2 Atom PPC Phone running WM5.0. The default Start buttons calls up WM5.0 Start Menu.
I will like to remapped it to become a Left Softkey activation button by tweaking some registry entry.
Is it possible?
Thanks for the help.
I love the 8125 with the exception of two features, both involving the keyboard.
1. Is there anyway to increase the time that the keyboard backlight stays on? And also, to turn the keyboard backlight on as soon as you open it?
Whenever I slide the keyboard out it's a little difficult to see what's on all the keys, as the characters are a light color and they are on a light-colored background. After you start typing the backlight comes on, but you need to tap one key to get it to light up in the first place. Is there a tweak to have the keyboard light come on when you slide it out? Without having to tap a key? And once it's on, can I edit a setting or reg key to have it stay on until I slide it back in?
2. If you'll notice, the first letter typed will always capitalize as soon as you tap the spacebar after completing the first typed word. This can be nice at times if you're typing in a Word document or something similar. However, typing passwords has become downright frustrating! You definitely do NOT want any letters capitalized when you're typing in a password. Plus the fact that all passwords show only as asterisks when typing them makes the auto-capitalizion hurt more than help. I always have to switch to the SIP when typing in passwords, as I get way too many "incorrect password" popups due, I'm certain, to the capitalization issue. Then, of course, changing to number mode (double-tap the round red dot key)can also be hairy when all you see are asterisks - It's difficult to know whether or not the mode changed when you try to reverse the numbers mode.
I've searched here and on the HoFo site to no avail.
Any help or advice is appreciated!
In addition to the above, I'd like to know how to accept an autocompletion suggestion from the keyboard, i.e. without using the stylus.
In Altissimus said:
In addition to the above, I'd like to know how to accept an autocompletion suggestion from the keyboard, i.e. without using the stylus.
Click to expand...
Click to collapse
Hit arrow key down and then the enter key. As for part two of J-Mac's post, if you're in a program that has a soft key bar at the bottom this simple registry edit will give a hand Caps/Function indicator:
Keyboard status indicator – adds a handy indicator that shows you when caps lock and symbol lock are activated on your keyboard.
Use Total Commander to navigate to \HKCU\ControlPanel\Keyb
Create a new entry with the name EnableIndicator
Assign the new entry a DWORD value of 1
perform a soft reset
and auto-capitalization can be changed by going to the Input control panel applet, it's on the Options tab "Capitalize beginning of sentence" or somesuch
As for keyboard backlight - no hacks known of for the Wizard :|
BoycottValvoline said:
Hit arrow key down and then the enter key.
Click to expand...
Click to collapse
Thanks for that - obvious when you know how!
Thanks for the keyboard indicators - very helpful.
Zeboxx, I already set that option, but it appears to only apply to the SIP - not the physical keyboard.
BoycottValvoline said:
In Altissimus said:
In addition to the above, I'd like to know how to accept an autocompletion suggestion from the keyboard, i.e. without using the stylus.
Click to expand...
Click to collapse
Hit arrow key down and then the enter key. As for part two of J-Mac's post, if you're in a program that has a soft key bar at the bottom this simple registry edit will give a hand Caps/Function indicator:
Keyboard status indicator – adds a handy indicator that shows you when caps lock and symbol lock are activated on your keyboard.
Use Total Commander to navigate to \HKCU\ControlPanel\Keyb
Create a new entry with the name EnableIndicator
Assign the new entry a DWORD value of 1
perform a soft reset
Click to expand...
Click to collapse
Great tips, BoycottValvoline! Indicator is working fine. That's a big help.
I don't know of anyone who has managed to come up with a way to extend the keyboard backlight, though.I can't find a registry key that addresses the backlight - doesn't appear to be one.
Keyboard Indicator problem
Keyboard status indicator – adds a handy indicator that shows you when caps lock and symbol lock are activated on your keyboard.
Use Total Commander to navigate to \HKCU\ControlPanel\Keyb
Create a new entry with the name EnableIndicator
Assign the new entry a DWORD value of 1
perform a soft reset
Click to expand...
Click to collapse
I've done this on my 8125 and I get no indicator when I use the hardware keyboard.
Any help, anyone?
Thanks.
I have an 8125 and it worked fine for me.
Take another look and make sure that you entered everything exactly as shown. You'd be surprised how easy it is to be off.
For example, check Start>Settings>Personal>Input>Word Completion and make sure that "Add a space after suggested word" is NOT selected. (If it is, you may be adding a space after the DWORD value without knowing it).
Plus check your spelling - Case and punctuation must be perfect when creating the registry key.
Finally, perform a soft reset afterwards. Now check the bottom of the screen when the hardware keyboard is slid out. (Make sure first that you have a program open that requires the keyboard.) Try hitting the shift key once, then twice. Same with the Function key. Once, then twice.
Once on, the Shift key shows a "C" and makes shift active for one keystroke. Double tap it and CAPS mode is on and the "C" stays there till you tap it twice again.
Function key works the same, but you'll see a solid dot instead of a "C".
Has anyone resolved the problem with making the backlight time stay on longer?
driven01 said:
Has anyone resolved the problem with making the backlight time stay on longer?
Click to expand...
Click to collapse
I haven't tried it, but I found this registry key on another site:
HKEY_CURRENT_USER\ControlPanel\Backlight\QKeyLedTimeout
It should be the number of seconds to stay on. Try 30.
Nah, that's on a few sites - but it doesn't work on the Wizard.
It's a hardware issue; no registry fix can do it on the Wizard.
total commander onto 8125?
cna the total cpmmander be downloaded onto 8125? says it is not a pocket pc program when I tried
BoycottValvoline said:
Hit arrow key down and then the enter key. As for part two of J-Mac's post, if you're in a program that has a soft key bar at the bottom this simple registry edit will give a hand Caps/Function indicator:
Keyboard status indicator – adds a handy indicator that shows you when caps lock and symbol lock are activated on your keyboard.
Use Total Commander to navigate to \HKCU\ControlPanel\Keyb
Create a new entry with the name EnableIndicator
Assign the new entry a DWORD value of 1
perform a soft reset
Click to expand...
Click to collapse
denbobp said:
cna the total cpmmander be downloaded onto 8125? says it is not a pocket pc program when I tried
Click to expand...
Click to collapse
If it's an .exe file, you have to install from your desktop through Active Sync. If it's a .cab file, just drag and drop it to your phone the Active Sync's "Explore" option.
Then, navigate to the file on your phone and tap it to begin the installation.
Backlight duration
Sorry to teel you guys , but the keypad backlight duration on the wizard is hardware controlled ! ! ! So no software / registry hack will lengthen / shorten the duration !
how can I quickly change from portrait to landscape and viceversa without going through the menu? Is there a way to make some sort of shortcut to the command?
Portrait/landscape shortcut?
Yep, I'm experiencing the same issue. It is strane because the S100 have this shortcut on the screen, why it is not on the S200?
Someone can help?
Of course you can. Just go to the hardware buttons settings, pick your favorite button and assign the rotate screen command to it
But what about the icon like the one from S100?? Can anyone post here the registry hack for that??
I don't believe there is a reg edit for this. The on screen icon with the S100 was a native feature for WM2003 that no longer exists with WM5.
Assign a hardware button to this task.
Is there a way I can enable "Long-Press" of the action button to bring up the context menu for a highlighted contact in the dialer (smart dial enabled).
By default I can use the stylus to long press a contact in the dialer to bring up the context menu but I want to use the action button for true one handed operation. In the present state pressing the action button after highlighting a contact starts dialing the number.
Maybe something to be incorporated in the registry?? I am on the factory WM5 ROM for my Imate Jasjam
Thanks
I think you could use VJKeyPress to emulate a context menu click, but you would have to assign it to another hardware key, and that would barely be worth the effort and would not be very neat or integrated. I don't think you can easily change the default behaviour of the HTC dialler plugin - I think you'd have to hack into the app itself, which would not be pretty.
But I may be wrong.
V
Thanks Vijay555. I too thought it wouldn.'t be easy.
Any idea if the dialer application on WM6 has a similar behaviour.
Regards
Hi guys.
When e.g. pressing call button Phone shows up with keypad shown by default. There is a "Hide keypad" function assigned to left softkey (on iPaq 614c).
Does anybody remember the registry hack to make the keypad hidden by default.
I am 100% sure it is possible, as I did it once, but I did not write down how
Thanks in advance.
Krame