Hi all!
my magician's audio stopped working from the earphone, but, if I use the slider to move down or up the volume, I can hear the voice coming from the other side. the speakerphone is working normally.
so, I tried to fix the earphone connector, but it didn't work.
I would try to remove the sound when using the slider, cause if i keep it up, I could hear the voice and without the "ding" it could be away to use it.
If you know what is the key to modify in the registry please help!
any help is really well accepted!!
thanks
Related
Hey All,
Is there any way to make the speaker louder? This is for general music playing, as well as speakerphone etc. On the XDA2 you could turn it up to the point it distorted...but the i-mate etc dont seem to go that high.
is there any 3rd party program to boost the speaker volume (i know it wont go that much higher without distortion, but the option would be nice).
Cheers,
Jez.
me too
This is the only thing, in my opinion, that is not perfect about htis device. I wish the speaker was a little louder for speaker phone. Also, it would be great if someon could figure out how to make speaker phone kick in automatically when you use voice dial.
Re: me too
asymtrax said:
This is the only thing, in my opinion, that is not perfect about htis device. I wish the speaker was a little louder for speaker phone. Also, it would be great if someon could figure out how to make speaker phone kick in automatically when you use voice dial.
Click to expand...
Click to collapse
There is a way with regedit, I'm still looking
im also interested in turning up the volume..
Make the holes a little bit bigger. The sound is muffled by the tiny hole.
@ZZPACKED: keep us informed. Im interested too.
Thanks
double post
Hello,
The speaker is small and can hold only a minimum dbs of sound. If it becomes more louder, you get the sound distorted and may spoil the speaker's cones too. But for low volume sounds, you may try boosting!
Hi Carty, how do you boost the sound?
Cheers
hi
hello everybody ! i`m also finding a way to increase sound of speaker, & in call how it was on mpx200 used to
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\InCall]
"InitVol"=dword:00000005
you can try, may be it seems to me ?! but a little better
Hi,
I noticed that my Wizard (updated to the last WWE rom) rings out loud through the speaker when receiving a call while headphones are connected through the jack. I'd like it to only ring in the headphones. Is it possible? Is this a known issue?
Thanks.
EDIT: I just found the solution myself:
I set the key \\\registry\HKCU\Control Panel\SoundCategories\Ring\Speaker to 0. It works!
This is just GREAT. Big thx for finding this, been looking for this for a long time, checked all the music players but none offered it. Thx again
i was looking for this too
thanks!
This is great BUT... is there a way to have the mic work while on the headphones? Because when I get a call while on my headphones I have to pull out the headphone jack in order for the other person to hear me. This would be great and very useful.
juiceppc said:
This is great BUT... is there a way to have the mic work while on the headphones? Because when I get a call while on my headphones I have to pull out the headphone jack in order for the other person to hear me. This would be great and very useful.
Click to expand...
Click to collapse
it might be a hardware issue?
it worked fine on my jam (i use the treo adaptor) and not my wizard
i'll have to test the stock jam headset on the wizard to know for sure
well it'd be better if i was wrong
Just to clarify, does the registry edit turn the ring off the speaker permanently, or just whent he headphones are plugged in?
Cheers.
Just when the headpones are plugged in.
Hey guys, i've been doing a couple searches but it doesn't seem like I've been able to find the answer I was looking for. How can I turn up the phones earpiece volume? (ie. the speaker at the top of the phone in between the blinking lights for incoming/outgoing calls).
I tried editing everything outlined in this thread:
http://forum.xda-developers.com/viewtopic.php?t=41273&postdays=0&postorder=asc&start=0
without any luck other than getting my ringtones and media volumes to play louder.
I also found another thread here:
http://forum.xda-developers.com/viewtopic.php?t=42246&highlight=sound+vol - that asks the same questions without any results.
Can this be done? I hope so because during calls the volume is just too low for my tastes, even with the slider up to the highest setting.
Thanks.
Same problem here
Same here the volume on this thing is terrible. Speaker phone is useless as well. I used to use a program on my treo called volume care wish there was something like this for the MDA, the only way i can hear it at all in the car is with my bluetooth and everything turned up to max.
there has to be some sort of fix for this.
I've search some boards but haven't found an answer for this. It just happened today.
After listening to xmradio, I tried to surf the net, but as usual, my phone dropped its internet connection. The only way to get it back is through soft reboot which I did. After that, no sound from the speak. Headphones work but the speaker doesn't...but it does at least when I use the phone on speaker phone. If I try to play any other sound from like Winampq or Windows Media Player, no sound.
I did reduce the volume on the start up sound so it doesn't play. I did that via registry. Now that there's no sounds whatsoever, I changed the registry on the start up so it plays 1/2 sound, but still nothing.
Does anyone have any suggestions???
thanks...
-jim
[email protected]
I found something else so this might help...when I do play xmradio or WMP or the phone rings, I do have the volume all the way up, if I put the speaker near my ear, I can hear it playing...now, how do I fix it.
In the registry key for startupanimation, I changed it to 200, but now I made it 100, should I change it back to 16??
Or anything other solutions?
Fix
Well....I fixed it....
It was the registry key for startupanimation. If that's set to 200 for mute, then the speaker will quit. I had to change it to 20 for the speaker.
thanks for my help
Jumpie said:
Well....I fixed it....
It was the registry key for startupanimation. If that's set to 200 for mute, then the speaker will quit. I had to change it to 20 for the speaker.
thanks for my help
Click to expand...
Click to collapse
i find just creating one thread for all problems get your answers quicker and you dont flood the forum....
Hi there,
I am having some issue with my O2 Atom Exec external speaker.
When the phone rings:
- I can't hear the ring tone (phone and pda volume settings turned up to high)
When I pick up:
- microphone does not work
- phone speaker does not work
Actually microphone seems to no longer work same with external speaker. I try to play music and no sound comes out externally. When I use the combined stereo headphones and microphone, these work fine. I have tried a hard reset and looking into the Windows registry for some obscure volume settings but this did not resolve the problem.
Anyone else experiencing a similar issue? Please help,
Hi,
You have a problem with the headphone socket. what I would suggest is play a file in media player and put the headphone plug in halfway and gently move it around left to right. You will know when it's fixed because the sound will start coming out of the speakers. This is a known fault that has been around a long time.
Cheers.
rdman
Today I faced this problem, I tried to do everything.
Then I did exactly what you said, and this procedure
fixed my speakers. Thank you ,very very much for help.
We can see this thread below, talking about this problem.
http://forum.xda-developers.com/showthread.php?t=267056