Dear All,
I have Kjam with WM6.0 Faria Crossbow, and i am facing a big problem. The back light is always on and on a brightness level higher than 100% i.e. It is as bright as when you reset the device for th frist 10 sec. I made a hard reset and it didn't solve the problem then i downloaded the phone alarm software and i set the back light to 50% and it didn't solve the problem too. I installed WM TNT 3.0 and also the problem didn't sevled yet.
Please can any body help me
Sounds like it's a hardware issue if you've tried doing a hard reset and changing roms and it's still happening. If it's still under warranty you might want to return it.
Related
Hi I am hoping someone can point me in the right direction.
I love my S200 it is perfect in every way, just lately after installing mNotes though i have had numerous problems, which seem to be only cured temporally by hard resetting the device.
I reset the device then within the next 1- 2 days I have lost my Bluetooth connection, it all seems OK but you cannot turn it on, when you click OK and go back and check both the Bluetooth on and discoverable boxes have had the crosses removed.
This problems also seems to extend to the sound when you turn it up, the phone turns it down.
And activesync just seems to stop working requiring a hard reset.
It almost like even after hard resetting the phone keeps hold of some of the old settings, is there a way of making it factory default apart from a hard reset, ie a HARD HARD reset ?
I need to get the mNotes working to stop my company forcing me to have a blackberry, but at this rate my device is hard rest almost every 24hrs.
Also how the hell can you back the device up now, in the old Activesysnc you had the option but now its gone !!!
Here’s hoping some one has the answer.
Cheers
Could you please tell how you hard reset your device? What version is your ROM?
I hard reset the device by pressing in both camera and record buttons and then pressing the stylus into the hole in the bottom, hold the record button in and let the other out, it then gives you the choice press sned to reset or any other button to escape.
The Rom is 2.9.7.24 WWE
Date 2/9/06
Radio 02.07.20Protocol 413.1.03
Ext rom 2.9.7.106
Cheers
It's quite unlikely that any settings from installed programs could remain after a hard reset.
After the next hard reset, I would try to use the phone without any program installation to make sure that it works under its default settings. If problems come back, then you may have a defective device and would have to return it back to your customer support. If there is no problem I would then try to install program one by one to make it clear which program causes the problem. Good luck!
Bluetooth not working
Also seem to have the same sort of problem.
Bluetooth works ok for several days and then for no reason refuses to connect to my bluetooth car kit and have to do a hard reset and start agn.
This has happened several times now.
Device is UK Orange M600 Standard rom etc.
Was wondering if to flash with a different rom maybe i-mate to see if this cures it. any ideas anyone.
Khuanchai
This is what I have done for the last 6-7 days, it is now becoming very frustrating. Even my old MDA did not require this much attention.
Now thinking about putting in the latest Dopod Rom.
Hard reset last night , no bluetooth now and Activsysnc no longer works.
So I supose its another h-reset or an upgrade ??????
Agree with you to try to upgrade it to the most recent Dopod 818Pro ROM (ROM version: 2.15.13.27 WWE). I have been using this new ROM for a while without any serious problems.
Hello All,
I have a little problem when resting the devices, first I upgraded to 2.17 custom rom, and now when I do a soft reset on the windows mobile blue screen the backlight goes out and if I dont bring it back the device just hangs, its not a big deal but when I reset it and put it in my pocket with out looking at it I think the device is on but its not. ANyone else seen that ?
Hello Everyone,
I have a Cingular 8125 with the original 2.25ROM. Every once in a while (about once a day), when I try to press the power button to return my phone from standby, the screen will not light. The green LED light showing that the phone is powered on still keeps blinking, but the screen will not turn on, and I have to soft reset my phone with the reset button on the side, or remove the battery in orer to get my phone back working.
I have done a hard reset and this problem has not changed. Does anyone have this problem, or seen a fix for it? I am thinking it might be a problem with some of the reg tweaks I have done, or with a program.
The problem programs I am thinking may be contributing to this are Wisbar Advance due to memory leaks, or PPCProfilesPRO. The only real reg tweaks I have done are Molski's Customizing tweaks and the A2DP hack. Could it be a hardware issue? Any help would be much appriciated.
Thanks.
Sorry I cannot help more, but I remember Wisbar Advance doing that to my h6315 WM2003 based device. Then again, it would sometimes do it on it's own too (but very rarely w/o W.A). I hacked it to make A2DP work, and it did not cause such problems on it... but again, totally different device, but similar CPU.
HI all,
My hd2 has fallen yesterday, and now i have noticed the keypad lights wont turn off :-(
the device goes to stand by mode fine, screen is off, but the keypad stays on.
any ideas, what could happen? Has anyone had this problem??
Thanks
I now have the same problem. Did you manage to fix it? If yes can you please let me know how did you fix it. Mine is giving the same problem and I didn't even drop it
Hard Reset
@Don001: Tried Hard Reset including flashing back stock ROM and trying every available update of Energy ROM. Didn't work . Is there any app like KeyLedControl that does the opposite....instead of keeping the lights on....switches it off instead? Mine is always on....and never switches off.
Tried to google it and someone suggested that the phone needs a bit of cleaning but...I saw the videos to disassemble....man that's hard
Any other suggestions?
I have the same problem, and mine didn't even fall.
And also hard reset it to stock rom.
i have the problem that my keypad flashes constantly since i installed a custom rom
it goes in this sequence.
* *** * *** etc.
hmmm....
if there is nobody who can answere our prpblem, maybe we should send it to rep?
One of the phone repairers suggested Chemical Cleaning. Not sure if it is going to fix it though...Going to give it a try. Will see how it goes
My HD2 has started to do this since yesterday too.
The keypads stay on but do very slighly dim but still on all nite, killing my battery!!
any suggestions?
This may or may not help
Look at the bottom of post # 4 there is a link to switch the lights oof, it may be rom specific but its worth a try
http://forum.xda-developers.com/showthread.php?t=926507
Thanks but How do i install this on my HD2? I have duttys ROM and this is a .zip file not a cab?
Hi folks,
any help with this is appreciated since I can't quite explain this problem to myself.
I have a HTC Touch Dual - last working rom was the WWE Insomnia release.
One day the screen suddenly went black - phone still functioning normally.
Hard resets appeared to solve nothing, the screen remained black.
At home I flashed the Original ROM back to the phone and screen worked again on reboot. Phone continued to work normal for some time.
After going to standby (screen turned off) the screen didn't turn back on again.
Also hard reset didn't work.
As for now, everytime I reflashed the phone with any rom (Original & Insomnia) the screen worked until a hard reset or standby mode.
Phone is running with HardSPL.
Any suggestions how to find reason for the black screen issue?
Google didn't help that much - only hint I found was reflashing the phone twice with the Original ROM which didn't help a lot...
Exactly same problem!! Insomnia ROM and strange screen behavior! Will try to restore original ROM.
Have anybody fixed it?
Oh, I have the same problem. Don't know if it's a hardware problem or software. I have unlocked and flashed many times. I also was thinking about a bad flash.