Hello. I have a Prophet (G4 model if is relevant) and the following problem:
Screen display resolution is like in Windows safe mode or 16 Colours. Something like this, the colours are distorted, i have only green and blue.
The phone is working, all functions are active but is no use if you can see the display as you should.
I want to know if there is a resolution display setting, is a software setting or a hardware error.
Can I do something to "repair" the phone ?
Thanks, Regards!
heh i had this problem once... it fixed itself...
I have this same problem aswell did you manage to fix this?
hi i have the same problem can anyone help us please
TRY WITH THE HARD RESET OR THE CLEAN STORAGE APPLICATION
_____________
HTC Wizard
g4
wm6 tnt 5.0
Any solution?
I own a S200 with the same problem, did you find any solution?
Changing ROMS and har reseting doesn't solve it
Thanks in advance
Solved!
The problem was a wrong connection of the cable that connects de TFT, a little hits in the area where the connector is supposed to be and... voile, the problem is fixed!! (until now)
Related
Hi i cant seem to enable the vireless netowrk on my i-mate jasjar. It worked in the beginning but now it just blinks realy fast when i press the button to enable it.
The only thing i can think of is that i installed the extended rom thing from buzz...it was that cab file i found in the comments on his site.
pls can anybody help me with this?
Please help me ppl. I tryed reverting the settings for the extended rom and that did not help eather.
Please i really need som help here guys
I had my wifi stop working at one point for unknown reasons. Soft resetting didn't fix the problem. It did start working again after a hard reset. It was not doing any fast blink like you describe, so it may be that whatever your problem is has no relation to whatever my problem was. I don't know if you have tried hard reset, but in any event I'm hoping one of the wizards here will have better advice for you.
Hehe by fast blinking i mean when i press the "wifi" button in the wireless manager. It just blinks breafly to indicate that i pressed it..but it does not turn blue like its suposed to and it does not turn wifi on like its suposed to.
Had hoped i wouldnt have to do a hard reset as i have my device set up just perfectly now
So if anybody has some tips here ill try anything.
btw what is sddeamon? i had sevreral of thouse in the notification que and i remoced all but one. could this be the problem?
OK, now I know what you mean, and unfortunately my problem was different. It would presumably turn on (button would change color) but not connect with anything, including access point that was no problem before. And sorry again since I don't know what that sddaemon thing is for sure. It might be related to the voice dial function, but I'm really not sure. Hard reset is definitely a pain. I've made a little cheat sheet for myself with all my tweaks to get things set up again. But it's a pain anyway. Part of the cost of being on the bleeding edge with these wonderful little machines.
so true so true. But since it seems that nobody else has this problem im a bit afraid that there might be a hardware problem.
Well only way to fighure it out is to do a hard reset!. Is there any way to back up WM5 like there was in 2003?
well i have now preformed a hard reset and that did not work. I also installed the imate rom twice (installed arabic first LOL) and that did not good eather.
So i guess there is a hardware issue with the phone itself...
Any thoughts?
Dear All,
I have Kjam with WM6.0 Faria Crossbow, and i am facing a big problem. The back light is always on and on a brightness level higher than 100% i.e. It is as bright as when you reset the device for th frist 10 sec. I made a hard reset and it didn't solve the problem then i downloaded the phone alarm software and i set the back light to 50% and it didn't solve the problem too. I installed WM TNT 3.0 and also the problem didn't sevled yet.
Please can any body help me
Sounds like it's a hardware issue if you've tried doing a hard reset and changing roms and it's still happening. If it's still under warranty you might want to return it.
hi
i have a Qtek 2020 and i have a screen problem.
there are vertical blue lines across my screen.
sometimes its back to normal,but not for long.
i can still upgrade the Qtek to another rom,but i can't access the files with
activesync.
are u shure its software problem? its sound like u drop it and phone just brake up ... or maybe the lines appears after some installation?
Sounds indeed like a hardware problem. Backup, and hard reset. If the problem persists, pay a visit to the PPC lab.
Sorry if this is not the way to post my problem. Searched threads for this problem but did not find it.
After upgrading my polaris from WM6.0 to WM6.1 official, my screen alignment is not correct. Pressing with the stylus on the screen results in a reaction of a different part of the screen. By using the phones screen alignment tool the reaction is better but for a very short while. I've done soft and hard resets but nothing seems to help. Is there someone with the same problem, or even better someone with a fix???
I have the same problem tried to flash rom with diferent versions even changed hard spl back to original spl nothing seems to solve the problem hope it's not a hardware problem
You should try the official SEA WWE version. That might solve your problem.
My Polaris was realy broken. Had to send it in for repair. Quick service, new screen. No problems anymore.
QTEK S-200 :
The touch screen works sometimes with fingers or stylus, sometimes freezes completely and sometimes only works with the buttons. I've done hard reset and still the same ... Will be hardware problem? Happened suddenly ... Already open it and did not see anything. Memory ? CPU ?
Some opinions ?
1: upgrade or downgrade your device...when not solved try option 2
2: replace toucscreen...my assumption touchscreen error